IP117MAHV-LCC4 SEME-LAB | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

0.5 AMP

VI–O Input - Output Differential Voltage – Standard – HV Series PD Power Dissipation TJ Operating Junction Temperature Range TSTG Storage Temperature 40V 60V Internally limited –55 to 150°C –65 to 150°C ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)

FEATURES

  • OUTPUT VOLTAGE RANGE ADJUSTABLE:

1.25 TO 40V FOR STANDARD VERSION

1.25 TO 60V FOR –HV VERSION

  • 1% OUTPUT VOLTAGE TOLERANCE (–A VERSIONS)
  • 0.3% LOAD REGULATION
  • 0.01% / V LINE REGULATION
  • COMPLETE SERIES OF PROTECTIONS:
  • CURRENT LIMITING
  • THERMAL SHUTDOWN
  • SOA CONTROL

DESCRIPTION

The IP117M Series are three terminal positive adjustable voltage regulators capable of supplying in excess of 0.5A over a 1.25V to 60V output range. These regulators are exceptionally easy to use and require only two external resistors to set the output voltage. In addition to improved line and load regulation, a major feature of the “A” series is the initial output voltage tolerance, which is guaranteed to be less than 1%. Over full operating conditions, including load, line, and power dissipation, the reference voltage is guaranteed not to vary more than 2%. These devices exhibit current limit, thermal overload protection, and improved power device safe operating area protection, making them essentially indestructible. 1.39 (0.055) 1.15 (0.045) 0.76 (0.030) 0.51 (0.020) 1.39 (0.055) 1.02 (0.040) 15 161312 14 34567 9.14 (0.360) 1.07 (0.040) » 2.16 (0.085) 7.62 (0.300) 7.12 (0.280) 1.65 (0.065) 1.40 (0.055) 0.33 (0.013) 0.08 (0.003) 0.43 (0.017) 0.18 (0.007 Rad. Rad. Pins 4,5 – Adjust Pins 15,16,17,18,1,2 – VOUT

1) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. 2) Test Conditions unless othewise stated: VIN – VOUT = 5V , TJ = 25°C , IOUT = 0.1A , PMAX = 10W , IMAX = 0.5A VMAX = 40V for standard series , 60V for HV series. 1.238 1.25 1.262 1.220 1.250 1.270 0.005 0.010 0.010 0.020 51 5 0.1 0.3 15 50 0.3 1 0.002 0.020 66 80 50 100 0.2 5 3.5 5 3.5 7 0.50 0.80 0.15 0.20 0.30 0.3 1 0.001 1.200 1.250 1.300 0.010 0.020 0.020 0.050 51 5 0.1 0.3 20 50 0.3 1 0.030 0.070 66 80 50 100 0.2 5 3.5 5 3.5 7 0.50 0.80 0.15 0.20 0.30 0.3 1 0.001 IP117MAHV IP117MHV , IP117M IP117MA VREF Reference Voltage DVOUT Line Regulation 1 DVIN DVOUT Load Regulation 1 DIOUT Thermal Regulation Ripple Rejection IADJ Adjust Pin Current DIADJ Adjust Pin Current Change IMIN Minimum Load Current ICL Current Limit DVOUT Temperature DTEMP Stability DVOUT Long Term Stability DTIME en RMS Output Noise (% of V OUT ) R qJC Thermal Resistance Junction to Case IOUT = 10mA IOUT = 10mA to IMAX VIN – VOUT = 3V to VMAX P £ PMAX TJ = –55 to +150°C VIN – VOUT = 3V to VMAX TJ = –55 to +150°C IOUT = 10mA to IMAX VOUT £ 5V VOUT ‡ 5V IOUT = 10mA to IMAX VOUT £ 5V TJ = –55 to +150°C V OUT ‡ 5V tp = 20ms C ADJ = 0 VOUT = 10V C ADJ = 10mF f = 120Hz TJ = –55 to +150°C TJ = –55 to +150°C IOUT = 10mA to IMAX TJ = –55 to +150°C VIN – VOUT = 2.5V to VMAX VIN – VOUT = 40V TJ = –55 to +150°C VIN – VOUT = 60V (HV SERIES) TJ = –55 to +150°C VIN – VOUT £ 15V TJ = –55 to +150°C VIN – VOUT = 40V VIN – VOUT = 60V (HV SERIES) TJ = –55 to +150°C TA = +125°C t = 1000 Hrs f = 10 Hz to 10 kHz V V % / V mV mV %/W dB dB mA mA mA A A °C/W