DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz IM810 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 01/30/16_A Page 1 of 8 Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages Ultra-low phase jitter: 0.5 pSec (12 kHz to 20 MHz) LVCMOS/HCMOS Compatible Output Pb-free, RoHS and REACH compliant Fast delivery times Typical Applications: Fibre Channel Server and Storage GPON, EPON 100M / 1G /10G Ethernet Electrical Specifications: Frequency Range 1.000 MHz to 80.000MHz Frequency Stability See Part Number Guide Inclusive of Initial Toler ance, Operating Temperature Range, Load, and Voltage. First Year Aging ±1.5 ppm At + 25ºC ±2ºC 10 Years Aging ±5.0 ppm At + 25ºC ±2ºC Operating Temperature See Part Number Guide Supply Voltage (Vdd) ±10% See Part Number Guide Current Consumption 31 mA typ./ 33 mA max 29 mA typ./ 31mA max No load condition, F = 20 MHz, Vdd = +2.5 V, +2.8 V or +3.3 V No load condition, f = 20 MHz, Vdd = +1.8V OE Disable Current 31 mA max 30 mA max Vdd = +2.5 V, +2.8 V or 3.3 V, OE = GND Vdd = +1.8 V, OE = GND Standby Current 70 µA max 10 µA max Vdd = +2.5 V, +2.8 V or 3.3 V, STതതത = GND Vdd = +1.8 V, STതതത = GND Waveform Output LVCMOS/HCMOS Symmetry 45%/55% 50% of waveform Rise / Fall Time 1.2 nSec typ./ 2.0 nSec max 15 pF Load, 10% to 90% of Vdd Logic “1” 90% of Vdd min Logic “0” 10% of Vdd max Input Voltage High 70% of Vdd min Pin 1, OE or STതതത Input Voltage Low 30% of Vdd max Pin 1, OE or STതതത Input Pull-up Impedance 100 kΩ typ./ 250 kΩ max
2.0 MΩ min
Pin 1, OE logic high or logic low, or STതതത logic high Pin 1, STതതത logic low Startup Time 7 mSec typ./ 10 mSec max Measured from the time Vdd reaches its rated minimum values OE Enable/Disable Time 150 nSec max F = 80 MHz, For other frequencies, T_oe = 100 nSec = 3 cycles Resume Time 6 mSec typ./ 10 mSec max In standby mode, measured from the time STതതത pin crosses 50% threshold. RMS Period Time 1.5 pSec typ./ 2.0 pSec max 2.0 pSec typ./ 3.0 pSec max F = 75 MHz, all Vdds RMS Period Time (random) 0.5 pSec typ./ 1.0 pSec max F = 10 MHz, Integration bandwidth = 12 kHz to 20 MHz Notes: All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated. Typical values are at +25ºC and nominal supply voltage. Absolute Maximum Limits Storage Temperature -65ºC to +150ºC Supply Voltage (Vdd) -0.5 VDC to 4.0 VDC Electrostatic Discharge 2000 V max Solder Temperature (follow standard Pb free soldering guidelines) 260ºC max Junction Temperature 150ºC max
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz IM810 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 01/30/16_A Page 2 of 8 Ordering Information: Part Number Guide Packages Input Voltage Operating Temperature Output Drive Strength Stability (ppm) Select Function Frequency IM810B – 5.0 x 3.2 IM810C – 3.2 x 2.5 IM810D – 2.5 x 2.0 1 = +1.8 V 6 = +2.5 V 2 = +2.8 V 7 = +3.0 V 3 = +3.3 V 1 = 0ºC to +70ºC 2 = -40ºC to +85ºC 3 = -20ºC to +70ºC - = Default (see tables 2 through 4) E - ±10 F = ±20 A = ±25 B = ±50 H = Tri-state S = Standby - Frequency Sample Part Number: IM810C-62-FS-10.0000MHz Strength (Rise and Fall Time) is 2.00 nSec per Table 3 with 30 pF load. With Pin 1 function as Standby Sample Part Number: IM810B-23FAH-66.0000MHz Strength (Rise and Fall Time) is 1.29 nSec per Table 1 with 15 pF load. With Pin 1 function as Tri-state Notes: Not all options are available at all frequencies and temperatures ranges. Please consult with sales department for any other parameters or options. Oscillator specification subj ect to change without notice. Phase Noise: Figure 1: Phase Noise, 10 MHz, +3.0 V LVCMOS Output
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz IM810 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 01/30/16_A Page 4 of 8 Test Circuit Waveform Environmental Specifications: Environmental Compliance Parameter Condition/Test Method Mechanical Shock MIL-STD-883F, Method 2002 Mechanical Vibration MIL-STD-883F, Method 2007 Temperature Cycle JESD22, Method A104 Solderability MIL-STD-883F, Method 2003 Moisture Sensitivity Level MSL Level 1 at +260ºC Pb Free Solder Reflow Profile Ts max to TL (Ramp-up Rate) 3ºC / second max Preheat Temperature min (Ts min) Temperature typ (Ts typ) Temperature max (Ts max) Time (Ts) 150ºC 175ºC 200ºC 60 to180 seconds Ramp-up Tate (TL to Tp 3ºC / second max Time Maintained Above Temperature (T Time (TL) 217ºC 60 to 150 seconds Peak Temperature (Tp) 260ºC max for seconds Time within 5ºC to Peak Temperature (Tp) 20 to 40 seconds Ramp-down Rate 6ºC / second max Tune 25ºC to Peak Temperature 8 minute max Moisture Sensitivity Level (MSL) Level 1 Units are backward compatible with +240ºC reflow processes
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz IM810 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 01/30/16_A Page 5 of 8 Pin Functionally Pin Description Pin Symbol Functionality Pin Assignments OE Tri-state High or Open = specified frequency output Low = Output is high impedance, only output is disabled. Top View GND Vdd OUT OE ST STതതത Standby High or Open = specified frequency output. Low = Output is low. Device goes to sleep mode. Supply current reduces to standby current.
2 GND Power Electrical ground
3 Out Output Oscillator output
4 Vdd Power Power supply voltage
Notes: 1. In OE or STതതത mode, a pull-up resistor of 10.0 kΩ or less is recommended if Pin 1 is not externally driven 2. A capacitor of value 0.1 µF or higher bet ween Pin 4 (Vdd) and Pin 1 (GND) is required. Timing Diagrams: Figure 8: Startup Timing (OE/തതതത Mode) Figure 9: Standby Resume Timing (തതതത Mode Only) Figure 10: OE Enable Timing (OE Mode Only) Figure 11: OE Disable Timing (OE Mode Only) Notes: IM810 supports gated output which is accurate within rated frequency stability from the first cycle
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz IM810 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 01/30/16_A Page 6 of 8 Selectable Drive Strength Options Rise/Fall Time (20% to 80%) vs CLOAD Tables Rise/Fall Time Typ (nS) Drive Strength (CLOAD) 5 pF 15 pF 30 pF 45 pF 60 pF Rise/Fall Time Typ (nS) Drive Strength (CLOAD) 5 pF 15 pF 30 pF 45 pF 60 pF Table 1: Vdd = +1.8 V Rise/Fall time for Specific CLOAD Table 2: Vdd = +2.5 V Rise/Fall time for Specific CLOAD Rise/Fall Time Typ (nS) Drive Strength (CLOAD) 5 pF 15 pF 30 pF 45 pF 60 pF Rise/Fall Time Typ (nS) Drive Strength (CLOAD) 5 pF 15 pF 30 pF 45 pF 60 pF Table 3: Vdd = +2.8 V Rise/Fall time for Specific CLOAD Table 4: Vdd= +3.0 V Rise/Fall time for Specific CLOAD
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz IM810 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 01/30/16_A Page 7 of 8 Mechanical Details: Package Dimensions and Suggest Land Pattern Marking 5.00 ±0.05 3.20 ±0.05 0.80 2.39 1.15 1.1 0.80 max 2.54 2.20 1.5 1.6 Opton B: 5.00 x 3.20 Package 3 4 2 1 Bottom View Marking 3.20 ±0.05 2.50±0.05 0.90 2.1 0.9 0.7 0.80 max Bottom View 2.20 1.90 1.4 1.2 Option C: 3.20 x 2.50 Package 2 1 Marking 2.70 ±0.05 2.40 ±0.05 1.10 1.00 0.75 0.5 0.80 max Bottom View 1.90 1.50 1.1 1.0 Option D: 2.70 x 2.40 Package (100% compatible with 2.50 x 2.00 ) 3 4 Suggested Land Pattern Suggested Land Pattern Suggested Land Pattern Marking Line 1 = XXXXX (Lot Code) Dot to denote Pin 1 location
Package Information
Leadframe: C194 Plating: NiPdAu
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz IM810 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 01/30/16_A Page 8 of 8 Tape and Reel Dimensions DIRECTION OF FEED REF: EIA-481-E Q3 Q4 Q2Q1 WIDTH TAPE PITCH REEL DIA Part Number Size Pitch Tape Width Pin Orient. Reel Dia. Count 330 3000 Notes: All dimensions are in mm. Do not scale drawings. PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America.