ILPA100JU Vitec | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

ILPA100JU SERIES 100W Water-Proof Constant Current LED Driver – Wide Input Voltage 90 to 305VAC, 47 to 63Hz – Constant Output Current Available From 350mA To 4200mA – Over Voltage, Short Circuit, Lighting, and Over Temperature Protection – High Efficiency (up to 92%) – Active Power Factor Correction (PFC) (99% typical) – IP67 Waterproof Rating, Metal Housing – Comply with UL8750 & EN61347 Safety Regulation

2 Year Warranty Approvals:

Part Number Output Current Range (Min. / Typ. / Max.) Output Voltage (Min. / Max.) Efficiency (220VAC, Full Load) Over Voltage Protection (Min. / Typ. / Max.) Max. Output Power ILPA100JU-S420ST 3990 / 4200 / 4410 mA 14 / 24 VDC 90.5% 28 / 31 / 34 VDC 100W ILPA100JU-S357ST 3391 / 3570 / 3748 mA 17 / 28 VDC 90.5% 33 / 36 / 40 VDC 100W ILPA100JU-S315ST 2992 / 3150 / 3307 mA 19 / 32 VDC 90.5% 38 / 42 / 45 VDC 100W ILPA100JU-S280ST 2660 / 2800 / 2940 mA 22 / 36 VDC 90.5% 43 / 47 / 51 VDC 100W ILPA100JU-S245ST 2327 / 2450 / 2572 mA 25 / 41 VDC 91% 49 / 53 / 58 VDC 100W ILPA100JU-S210ST 1995 / 2100 / 2205 mA 29 / 48 VDC 91% 57 / 63 / 67 VDC 100W ILPA100JU-S175ST 1662 / 1750 / 1837 mA 34 / 57 VDC 91% 68 / 74 / 80 VDC 100W ILPA100JU-S140ST 1330 / 1400 / 1470 mA 43 / 71 VDC 91% 86 / 94 / 101 VDC 100W ILPA100JU-S105ST 997 / 1050 / 1102 mA 57 / 95 VDC 91% 114 / 124 / 133 VDC 100W ILPA100JU-S070ST 665 / 700 / 735 mA 86 / 143 VDC 91% 171 / 186 / 200 VDC 100W ILPA100JU-S045ST 427 / 450 / 473 mA 132 / 222 VDC 92% 266 / 289 / 311 VDC 100W ILPA100JU-S035ST 332 / 350 / 368 mA 172 / 286 VDC 92% 343 / 372 / 401 VDC 100W

Electrical Characteristics

Parameter Test Conditions Min. Typ. Max. Unit Input Voltage Operating Voltage 90 305 VAC Input Frequency 47 63 Hz Output Power Range Vin=90 to 305VAC 0 100 W Input Current (Low Line) Io=Full load, Vin=115VAC 1.30 A Input Current (High Line) Io=Full load, Vin=230VAC 0.60 A High Line Inrush Current Io=Full load, 25° C, Cool start, Vin=230VAC 65 A Power Factor Correction Vin=110VAC 96 99 % Efficiency Io=Full Load, Vin=220VAC 88 92 % Line Regulation Io=Full Load 1 % Load Regulation Vin=230VAC 5 % Over Voltage Protection Latch mode. The power unit shall return to normal operation only after the power is turn-on again. (Please refer to output table.) Over Temperature Protection 110 °C Short Circuit Protection No damage shall occur when any output operating in a short circuit condition. The power supply shall be self-recovery when the fault condition is removed. Output Overshoot / Undershoot When power on or off 10 % Start Up Time Io=Full Load, Vin=100VAC 0.6 1 S Ripple & Noise (Peak to Peak) Measured by 20 MHz bandwidth oscilloscope and the output paralleled a 0.1 uF ceramic capacitor and a 10 uF electrolytic capacitor. 5 % Vo

Parameter Test Conditions Min. Typ. Max. Unit Operating Temperature Humidity: 10% RH to 100% RH -35 70 °C Storage Temperature Humidity: 5% RH to 100% RH -40 85 °C MTBF: Operation temperature at 25° C, calculated per MIL-HDBK-217F 0.478M Hours Life Time at 25° C ambient temperature 0.104M Hours Approvals and Compliance Parameter Standards EMI EN55015 EMS EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, , EN61000-4-4, , EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61547 CSA-C22.2 No.250.0, EN61347-1,EN61347-2-13 Waterproof IP67 Rating Mechanical Parameter Specification Dimension, 194x67.5x37mm (7.64x2.66x1.46 inches) Net Weight 1000g approx.