IL339 IKSEMICON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Quad Single Supply Comparator IL339

ORDERING INFORMATION

TA = -40° to 85° C for all packages. The IL339 consists of four i ndependent precision voltage comparators with an offset vol tage speci fication as l ow as 2.0 m V m ax for four comparators which were designed specifically t o operat e from a si ngle power supply over a wide range of voltages. Application areas in clude lim it co mparators, sim ple an alog to digital converters; pulse, squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates.

  • Single or Split Supply Operation
  • Low Input Bias Current
  • Low Input Offset Current
  • Input Common Mode Voltage Range to Gnd
  • Low Output Saturation Voltage
  • TTL and CMOS Compatible LOGIC DIAGRAM PIN 3 = VCC PIN 12 = GND PIN ASSIGNMENT Rev. 00

MAXIMUM RATINGS* Symbol Parameter Value Unit VCC Power Supply Voltages Single Supply Split Supplies ±18 V VIDR Input Differential Voltage Range 36 V VICR Input Common Mode Voltage Range (1) -0.3 to VCC V ISC Output Short Circuit to Ground Continuous IIN Input Current, per pin (2) 50 mA TJ Junction Temperature Plastic Packages 150 Tstg Storage Temperature -65 to +150 °C TL Lead Temperature, 1mm from Case for 10 Seconds 260 °C PD Power Dissipation @TA=25°C Plastic Package Derate above 25°C 1.0 8.0 W mW/°C *Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. Notes: 1. Split Power Supplies. 2. VIN<-0.3V. This input current will only exist when voltage at any of the input leads is driven negative. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit VCC DC Supply Voltage ±2.5 or 5.0 ±15 or V TA Operating Temperature, All Package Types -40 +85 °C This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions m ust be taken to avoid applications of any voltage highe r than maximum rated voltages to this high-impedance ci rcuit. For proper operat ion, V IN and V OUT should be const rained t o t he range GND ≤(VIN or VOUT)≤VCC. Unused inputs must always be t ied to an appropri ate logic voltage level (e.g., ei ther GND or VCC). Unused outputs must be left open. Rev. 00

DC ELECTRICAL CHARACTERISTICS (TA=-40 to +85°C) Guaranteed Limit Symbol Parameter Test Conditions Min Typ Max Unit VIO Input Offset Voltage V0=1.4V VCC=5.0-30V;RS≤100Ω VICR=0V - (VCC-1.5)V - 9.0 5.0* mV IIB Input Bias Current V0=1.4V VCC=5.0-30V VICR=0V - (VCC-1.5)V - 400 nA IIO Input Offset Current V0=1.4V VCC=5.0-30V VICR=0V - (VCC-1.5)V - ±150 nA VICR Input Common Mode Voltage Range VCC=5.0-30V 0 VCC- 2.0V V ICC Supply Current RL=∞,VCC=5.0 RL=∞,VCC=30V 2.0* 2.5* mA AVOL Voltage Gain VCC=15V, RL=15KΩ - 200* - V/mV t1 Large Signal Response Time VIN=TTL Logic Swing, Vref=1.4V, VCC=5.0V, RL=5.1KΩ, VRL=5.0V - 300* - ns t2 Response Time VCC=5.0V, RL=5.1KΩ, VRL=5.0V - 1.3* - µs Isink Output Sink Current VI(-)=1.0V, VI(+)=0V, V0≤1.5V, VCC=5.0V 6.0* - - mA Vsat Saturation Voltage VI(-)=1.0V, VI(+)=0V, Isink≤4.0mA, VCC=5.0V - - 700 mV IOL Output Leakage Current VI(+)=1.0V, VI(-)=0V, V0=5.0V V0=30V 0.1* 1000 nA VIDR Differential Input Voltage Range All VIN≥GND or V-Supply (if used) VCC* V *=@25°C Rev. 00

(MS - 001AA) Symbol MIN MAX A 18.67 19.69 B 6.1 7.11 C 5.33 D 0.36 0.56 F 1.14 1.78 G H J 0° 10° K 2.92 3.81 NOTES: L 7.62 8.26 1. Dimensions “A”, “B” do not include mold flash or protrusions. M 0.2 0.36 Maximum mold flash or protrusions 0.25 mm (0.010) per side. N 0.38 D SUFFIX SOIC (MS - 012AB) Symbol MIN MAX A 8.55 8.75 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G H J 0° 8° NOTES: K 0.1 0.25 1. Dimensions A and B do not include mold flash or protrusion. M 0.19 0.25 Dimension, mm 1.27 5.27 2.54 7.62 Dimension, mm A BH C K C M J F M P G D R x 45 SEATING PLANE 0.25 (0.010) M T -T- A B F G D L H SEATING PLANE N K 0.25 (0.010) M T M J -T- C Rev. 00