DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
High Performance Voltage Comparators IL311
ORDERING INFORMATION
TA = -45°C to 85°C for all packages LOGIC DIAGRAM Input polarity is reversed when GND pin is used as an output. PIN ASSIGNMENT MAXIMUM RATINGS Symbol Parameter Value Unit VCC + ⏐VEE⏐ Total Supply Voltage 36 V VO - VEE Output to Negative Supply Voltage 40 V VEE Ground to Negative Supply Voltage 30 V VID Input Differential Voltage ± 30 V VIN Input Voltage (Note) ± 15 V - Voltage at Strobe Pin VCC to VCC - 5 V PD 1/θJA Power Dissipation and Thermal Characteristics Plastic Dual In-Line Packages Derate above TA =+25°C 625 5.0 mW mW/°C TJ(max) Operating Junction Temperature +150 °C Tstg Storage Temperature Range -60 to +150 °C Note: This rating applies for ±15 volt supplies. The positive input voltage lim it is 30 volts above the negative supply. The negative input voltage lim it is equal to the negativ e supply voltage or 30 volts below the positive supply, whichever is less.
RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit VCC + ⏐VEE⏐ Total Supply Voltage 30 V TA Operating Temperature, All Package Types - 45 +85 °C ELECTRICAL CHARACTERISTICS (VCC=+15 V, VEE= -15 V, T A =+25 °C unless ot herwise not ed [Note 1]) Symbol Parameter Test Conditions Guaranteed Limits Unit Min Max VIO Input Offset Voltage (Note 2) RS ≤ 50 kΩ, TA = +25°C RS ≤ 50 kΩ, -45°C ≤ TA ≤ 85°C 7.5 mV IIO Input Offset Current (Note 2) TA = +25°C -45°C ≤ TA ≤ 85°C 100 nA IIB Input Bias Current TA = +25°C TA = -45°C TA = +85°C 250 375 500 nA AV Voltage Gain 150000 tDLH Propagation Delay Time 300 ns VDS Saturation Voltage TA = +25°C VID ≤ -10 mV, IO=50 mA 1.5 V VIR Input Voltage Range -14.5 13.0 V ICC Positive Supply Current +7.5 mA IEE Negative Supply Current -5.0 mA NOTES: 1. Offset voltage, offset current and bias current specifications apply for a supply voltage range from a single 5.0 volt supply up to ±15 volt supplies. 2. The offset voltages and offset currents given are t he maximum values required to drive the output within a vol t of either supply with a 1.0 mA load. Thus, these parameters define an error band and take into account the “worst case” effects of voltage gain and input impedance.
(MS – 001BA) Symbol MIN MAX A 8.51 10.16 B 6.1 7.11 C 5.33 D 0.36 0.56 F 1.14 1.78 G H J 0° 10° K 2.92 3.81 NOTES: L 7.62 8.26 1. Dimensions “A”, “B” do not include mold flash or protrusions. M 0.2 0.36 Maximum mold flash or protrusions 0.25 mm (0.010) per side. N 0.38 D SUFFIX SOIC (MS - 012AA) Symbol MIN MAX A 4.8 5 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G H J 0° 8° NOTES: K 0.1 0.25 1. Dimensions A and B do not include mold flash or protrusion. M 0.19 0.25 1.27 5.72 Dimension, mm Dimension, mm 2.54 7.62 A BH C K C M J F M P G D R x 45 SEATING PLANE 0.25 (0.010) M T -T- L H M J A B F G D SEATING PLANE N K 0.25 (0.010) M T -T- C