IHL0212S3V3

IHL02 XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

IH L02 Series D C -D C C onverter Input O utput C haracteristic M inim um Typical m a xim um U nits N otes & C onditions O utput Voltage 3 .3 3 0 VD C See M odels and R atings table Initial Set Accuracy ±5 % At full load M inim um Load 10 % M inim um load required to m eet specified regulation Line R egulation ±1.2 % /1% O utput changes by m ax of 1.2% for each 1% change in input voltage Load R egulation 12/10 % For IH L0 20 5 S3 V3 and IH L0 20 5 S0 5 /O ther M odels. From 10 % to full load, see application note C ross R egulation ±5 % O n dual output m odels, w hen one output is at 25 % load and other is varied from 10 % load to full load R ipple & N oise 15 0 m V pk-pk 20 M H z bandw idth. M easured using 10 µF electrolytic in parallel w ith 0 .1 µFceram i c capacitor Short C ircuit Protection C ontinuous M axim um C apacitive Load See M odels and R atings table T em perature C oefficient 0 .0 3 %/ ˚C C haracteristic M inim um Typical m a xim um U nits N otes & C onditions Input Voltage R ange 4.5 5 .5 VD C

5 V nom inal

10 .8 13 .2 12 V nom inal 13 .5 16.5 15 V nom inal 21.6 26.4 24 V nom inal Input R eflected R ipple C urrent 20 m A pk-pk Through 12 µH inductor and 47 µF capacitor Input Surge VD C for 10 0 m s w w w .xppow er.com 1

• High Isolation, 5200 V
• 250 VAC Working Voltage
• Single and Dual Outputs
• Bipolar Outputs for MOSFET and IGBT Drives
• SIP7 Package
• -40 °C to +95 °C Operation
• Full Load at 65 °C Ambient
• MTBF 2.5 MHrs
• 3 Year Warranty Dim ensions: IHL02:

2 Watts

0.28 (7.2) 0.39 (10.0) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.01 (0.25) 0.08 (2.0) 0.12 (3.0) 0.37 (9.5) 0.08 (2.13) 0.08 (2.13) 0.10 (2.54) 0.60 (15.24) 0.76 (19.5) 0.28 (7.2) 1. All dim ensions are in inches (m m ) 2. W eight: 0 .0 0 6 lbs (2.7 g) approx. 4. Pin pitchand length tolerance: ±0 .0 14 (±0 .3 5 ) 5 . C ase tolerance: ±0 .0 2 (±0 .5 ) N otes Pin C onnections Pin Single D ual 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout

6 N o Pin C om m on

w w w .xppow er.com 2 D C -D C C onverter M odels & Ratings N otes Inp ut currents m easured at nom inal inp ut voltage. G eneral C haracteristic M inim um Typical m a xim um U nits N otes & C onditions Efficiency 80 % See M odels and R atings table Isolation: Input to O utput 5 20 0 VD C Isolation W orking Voltage 25 0 VAC Isolation R esistance 10 9 Ω Isolation C apacitance 7 pF Sw itching Frequency 50 10 0 kH z Pow er D ensity 23.7 W /in 3 M ean Tim e B etw een Failure 3 .3 M H rs M IL-H D B K-217F , +25 °C G B W eight 0 .0 0 6 (2.7) lb (g) Input Voltage O utput Voltage O utput C urrent Input current M a xim um C apacitive Load Efficiency M odel N um ber N o Load Full Load 4.5-5.5V 3V3 500 m A 40 m A 435 m A 1000 µF 76% IH L0205S3V3

5 V 400 m A 40 m A 505 m A 470 µF 79% IH L0205S05

9 V 222 m A 40 m A 480 m A 470 µF 83% IH L0205S09

12 V 167 m A 40 m A 475 m A 220 µF 84% IH L0205S12

15 V 133 m A 40 m A 470 m A 220 µF 85% IH L0205S15

±5 V ±200 m A 40 m A 505 m A ±220 µF 79% IH L0205D 05 ±9 V ±111 m A 40 m A 490 m A ±220 µF 82% IH L0205D 09 ±12 V ±83.3 m A 40 m A 480 m A ±100 µF 83% IH L0205D 12 ±15 V ±66.7 m A 40 m A 475 m A ±100 µF 84% IH L0205D 15 +15/-9 V +66.7/-111 m A 40 m A 480 m A +100/-220 µF 83% IH L0205D 1509 10.8-13.2V 3V3 500 m A 30 m A 185 m A 1000 µF 74% IH L0212S3V3

5 V 400 m A 30 m A 210 m A 470 µF 79% IH L0212S05

9 V 222 m A 30 m A 205 m A 470 µF 82% IH L0212S09

12 V 167 m A 30 m A 205 m A 220 µF 82% IH L0212S12

15 V 133 m A 30 m A 200 m A 220 µF 83% IH L0212S15

±5 V ±200 m A 30 m A 210 m A ±220 µF 79% IH L0212D 05 ±9 V ±111 m A 30 m A 205 m A ±220 µF 81% IH L0212D 09 ±12 V ±83.3 m A 30 m A 200 m A ±100 µF 83% IH L0212D 12 ±15 V ±66.7 m A 30 m A 200 m A ±100 µF 83% IH L0212D 15 +15/-9V +66.7/-111 m A 30 m A 210 m A +100/-220 µF 80% IH L0212D 1509 13.5-16.5V 3V3 500 m A 25 m A 150 m A 1000 µF 74% IH L0215S3V3

5 V 400 m A 25 m A 170 m A 470 µF 78% IH L0215S05

9 V 222 m A 25 m A 165 m A 470 µF 81% IH L0215S09

12 V 167 m A 25 m A 165 m A 220 µF 82% IH L0215S12

15 V 133 m A 25 m A 160 m A 220 µF 83% IH L0215S15

±5 V ±200 m A 25 m A 170 m A ±220 µF 79% IH L0215D 05 ±9 V ±111 m A 25 m A 165 m A ±220 µF 81% IH L0215D 09 ±12 V ±83.3 m A 25 m A 160 m A ±100 µF 83% IH L0215D 12 ±15 V ±66.7 m A 25 m A 165 m A ±100 µF 82% IH L0215D 15 +15/-9V +66.7/-111 m A 25 m A 165 m A +100/-220 µF 81% IH L0215D 1509 21.6-26.4V 3V3 500 m A 20 m A 95 m A 1000 µF 73% IH L0224S3V3

5 V 400 m A 20 m A 105 m A 470 µF 78% IH L0224S05

9 V 222 m A 20 m A 105 m A 470 µF 81% IH L0224S09

12 V 167 m A 20 m A 105 m A 220 µF 81% IH L0224S12

15 V 133 m A 20 m A 105 m A 220 µF 81% IH L0224S15

±5 V ±200 m A 20 m A 105 m A ±220 µF 79% IH L0224D 05 ±9 V ±111 m A 20 m A 105 m A ±220 µF 80% IH L0224D 09 ±12 V ±83.3 m A 20 m A 105 m A ±100 µF 81% IH L0224D 12 ±15 V ±66.7 m A 20 m A 100 m A ±100 µF 82% IH L0224D 15 +15/-9V +66.7/-111 m A 20 m A 105 m A +100/-220 µF 80% IH L0224D 1509

w w w .xppow er.com D C -D C C onverter M echanical Details EM C: Im m unity Phenom enon Standard Test Level C riteria N otes & C onditions ESD Im m unity EN 610 0 0 -4-2 ±6/±8 kV A C ontact/Air D ischarge R adiated Im m unity EN 610 0 0 -4-3 10 Vrm s A EFT/B urst EN 610 0 0 -4-4 2 kV A External com ponents required, see application notes C onducted Im m unity EN 610 0 0 -4-6 10 V rm s A m agnetic Fields EN 610 0 0 -4-8 1 A/m A Printed Face 0.28 (7.2) 0.39 (10.0) 0.02 (0.5) 0.02 (0.5) 0.02 (0.5) 0.01 (0.25) 0.08 (2.0) 0.12 (3.0) 0.37 (9.5) 0.08 (2.13) 0.08 (2.13) 0.10 (2.54) 0.60 (15.24) 0.76 (19.5) 0.28 (7.2) 1. All dim ensions are in inches (m m ) 2. W eight: 0 .0 0 6 lbs (2.7 g) approx. 4. Pin pitch and length tolerance: ±0 .0 14 (±0 .3 5 ) 5 . C ase tolerance: ±0 .0 2 (±0 .5 ) N otes Pin C onnections Pin Single D ual 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout EM C: Em issions Phenom enon Standard Test Level N otes & C onditions C onducted EN 5 5 0 3 2 C lass B See Application N ote R adiated EN 5 5 0 3 2 C lass B Environm ental C haracteristic M inim um Typical m a xim um U nits N otes & C onditions O perating T em perature -40 +95 °C D erate Linearly from 10 0 % at 65 °C to no load at 95 °C Storage T em perature -40 +125 °C C ase T em perature +100 °C H um idity 2.5 95 % R H N on-condensing C ooling N atural convection

w w w .xppow er.com D C -D C C onverter

23 Aug 16

Input com ponents C 1 and D 1 are used to help m eet EFT and surge test requirem ents for the m odule. A pplication N ote C 1 D 1 IH L0 20 5 XXXX 3 3 0 µF/5 0 V SM D J9.0 A IH L0 212XXXX 3 3 0 µF/5 0 V SM D J13 A IH L0 215 XXXX 3 3 0 µF/5 0 V SM D J18 A IH L0 224XXXX 10 0 0 µF/3 5 V SM D J24 A High limit Typical Load Line Low Limit IHL02 R egulation EFT Filter Input filter com ponents (C 1,C 2, C 3 and L) are used to help m eet conducted em issions requirem ents for the m odule. These com ponents should be m ounted as close as possible to the m odule, and all leads should be m inim ised to decrease radiated noise. C 1 L C 2 C 3 IH L0 20 5 XXXX 120 6, 4.7 µF/ 16 V 6.8 µH IH L0 212XXXX 120 6, 22 µF/ 25 V 6.8 µH IH L0 215 XXXX 120 6, 22 µF/ 25 V 6.8 µH IH L0 224XXXX 1210 , 10 µF/ 3 5 V 10 µH 1210 , 10 µF/ 3 5 V 1210 , 10 µF/ 3 5 V IHL02 L EM I Filter