ICH5012S2V5 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
- 2:1 & 4:1 Input Ranges
- Efficiency up to 90%
- Single Output
- -40 °C to +100 °C Operating Temperature
- Continuous Short Circuit Protection
- Five-sided Metal Case
- Remote On/Off ICH/IFH Series Input Input Voltage Range • See tables Input Current (no load) • See tables Input Reverse Voltage • None Protection Input Filter • Pi network Undervoltage Lockout • 12 Vin, power up 8.8 V, down 8.0 V 24 Vin, power up 17.0 V, down 16.0 V 48 Vin, power up 34.0 V, down 32.5 V Output Output Voltage Trim • ±10% Initial Set Accuracy • ±1% max Line Regulation • ±0.2% max measured from high line to low line Load Regulation • ±0.2% max measured from 0-100% load Transient Response • 5% max deviation, recovery to within 1% in 500 µs, 25% step load change Ripple & Noise • 2.5, 3.3 & 5 V models: 100 mV pk-pk 12 & 15 V models: 150 mV pk-pk 24, 28 & 48 V models: 1% max pk-pk (20 MHz bandwidth). See note 3 Overvoltage Protection • 115-140% Short Circuit Protection • Continuous Temperature • ±0.03%/°C Coefficient Current Limit • 110-140% nominal output Remote On/Off • See note 1 & 2 Thermal Shutdown • Case temperature +100 °C xppower.com General Efficiency • See tables Isolation Voltage • 1500 VDC Input to Output
1500 VDC Input to Case
1500 VDC Output to Case
Isolation Resistance •1 0 7 Ω min Switching Frequency • ICH50/ICH7548W/IFH200: 300 kHz typical ICH7512/ICH7524: 400 kHz typical ICH100/ICH150: 500 kHz typical Environmental Operating Case • -40 °C to +100 °C, see derating curve Temperature Storage Temperature • ICH100/150 & IFH200: -40 °C to +105 °C ICH50/75: -55 °C to +105 °C EMC & Safety Emissions • EN55022, level A conducted ESD Immunity • EN61000-4-2, level 2 Perf Criteria B Radiated Immunity • EN61000-4-3, 3 V/m Perf Criteria B Conducted Immunity • EN61000-4-6, 3 V rms Perf Criteria B Safety Approvals • UL60950-1
ICH/IFH SeriesModels and Ratings Input Voltage Output Voltage Output Current Input Current Efficiency Model Number(2) No Load Full Load(4) 18-75 VDC 3.3 V 15.00 A 50 mA 1320 mA 78% ICH7548WS3V3 5.0 V 15.00 A 50 mA 1905 mA 82% ICH7548WS05 12.0 V 6.25 A 50 mA 1860 mA 84% ICH7548WS12 15.0 V 5.00 A 50 mA 1860 mA 84% ICH7548WS15 24.0 V 3.12 A 50 mA 1860 mA 84% ICH7548WS24 Notes 2. Add suffix ‘N’ to the model number to receive the unit with negative logic Remote On/Off. 3. Ripple & noise is measured with a 10 µF tantalum capacitor and 0.1 µF ceramic capacitor across output. 4. Input current specified at 12 V for 9-18 VDC models, 24 V for 18-36 & 9-36 VDC models and 48 V for the 36-75 & 18-75 VDC mod els. 5. For dual output models contact sales. Input Voltage Output Voltage Output Current Input Current Efficiency Model Number(2,5) No Load Full Load(4) 9-18 VDC 2.5 V 10.00 A 50 mA 2740 mA 76% ICH5012S2V5 3.3 V 10.00 A 50 mA 3525 mA 78% ICH5012S3V3 5.0 V 10.00 A 50 mA 5145 mA 81% ICH5012S05 12.0 V 4.16 A 50 mA 4950 mA 84% ICH5012S12 15.0 V 3.33 A 50 mA 4950 mA 84% ICH5012S15 24.0 V 2.08 A 50 mA 4950 mA 84% ICH5012S24 18-36 VDC 2.5 V 10.00 A 50 mA 1353 mA 77% ICH5024S2V5 3.3 V 10.00 A 50 mA 1740 mA 79% ICH5024S3V3 5.0 V 10.00 A 50 mA 2540 mA 82% ICH5024S05 12.0 V 4.16 A 50 mA 2540 mA 85% ICH5024S12 15.0 V 3.33 A 50 mA 2540 mA 85% ICH5024S15 24.0 V 2.08 A 50 mA 2419 mA 86% ICH5024S24 36-75 VDC 2.5 V 10.00 A 50 mA 676 mA 77% ICH5048S2V5 3.3 V 10.00 A 50 mA 870 mA 79% ICH5048S3V3 5.0 V 10.00 A 50 mA 1250 mA 83% ICH5048S05 12.0 V 4.16 A 50 mA 1220 mA 85% ICH5048S12 15.0 V 3.33 A 50 mA 1220 mA 85% ICH5048S15 24.0 V 2.08 A 50 mA 1209 mA 86% ICH5048S24 Input Voltage Output Voltage Output Current Input Current Efficiency Model Number(2,5) No Load Full Load(4) 9-18 VDC 2.5 V 15.00 A 50 mA 4110 mA 76% ICH7512S2V5 3.3 V 15.00 A 50 mA 5290 mA 78% ICH7512S3V3 5.0 V 15.00 A 50 mA 7715 mA 81% ICH7512S05 12.0 V 6.25 A 50 mA 7440 mA 84% ICH7512S12 15.0 V 5.00 A 50 mA 7440 mA 84% ICH7512S15 24.0 V 3.13 A 50 mA 7440 mA 84% ICH7512S24 18-36 VDC 2.5 V 15.00 A 50 mA 2029 mA 77% ICH7524S2V5 3.3 V 15.00 A 50 mA 2610 mA 79% ICH7524S3V3 5.0 V 15.00 A 50 mA 3810 mA 82% ICH7524S05 12.0 V 6.25 A 50 mA 3675 mA 85% ICH7524S12 15.0 V 5.00 A 50 mA 3675 mA 85% ICH7524S15 24.0 V 3.13 A 50 mA 3640 mA 86% ICH7524S24 36-75 VDC 2.5 V 15.00 A 50 mA 1015 mA 77% ICH7548S2V5 3.3 V 15.00 A 50 mA 1305 mA 79% ICH7548S3V3 5.0 V 15.00 A 50 mA 1883 mA 83% ICH7548S05 12.0 V 6.25 A 50 mA 1838 mA 85% ICH7548S12 15.0 V 5.00 A 50 mA 1838 mA 85% ICH7548S15 24.0 V 3.13 A 50 mA 1820 mA 86% ICH7548S24 Input Voltage Output Voltage Output Current Input Current Efficiency Model Number(2) No Load Full Load(4) 9-36 VDC 3.3 V 10.00 A 50 mA 1785 mA 78% ICH5024WS3V3 5.0 V 10.00 A 50 mA 2570 mA 81% ICH5024WS05 12.0 V 4.16 A 50 mA 2510 mA 83% ICH5024WS12 15.0 V 3.33 A 50 mA 2510 mA 83% ICH5024WS15 24.0 V 2.08 A 50 mA 2510 mA 83% ICH5024WS24 18-75 VDC 3.3 V 10.00 A 50 mA 880 mA 78% ICH5048WS3V3 5.0 V 10.00 A 50 mA 1270 mA 82% ICH5048WS05 12.0 V 4.16 A 50 mA 1240 mA 84% ICH5048WS12 15.0 V 3.33 A 50 mA 1240 mA 84% ICH5048WS15 24.0 V 2.08 A 50 mA 1240 mA 84% ICH5048WS24
- Add suffix ‘N’ to the model number to receive the unit with negative logic Remote On/Off. 3. Ripple & noise is measured with a 10 µF tantalum capacitor and 0.1 µF ceramic capacitor across output. 4. Input current specified at 24 V for 18-36 VDC models and 48 V for 36-75 VDC models. BOTTOM VIEW (106.7) 4.20 4.60 (116.8) 0.70 2.00 0.30 (17.8) (50.8) (7.6) 0.30 (7.6) M3*0.5 Through 4pl. 0.28 2.40 SIDE VIEW (13.5) 0.53 (61.0) (7.2) ø0.04 (1.02) Pins 1-4, 6-8 ø0.08 (2.03) Pins 5 & 9 ICH/IFH Series Mechanical Details BOTTOM VIEW (48.3) 1.90 2.28 (57.9) 1.40 2.00 0.60 (35.6) (50.8) (15.2) M3*0.5 Through 4pl. Mounting Inserts 0.18 min. 2.40 SIDE VIEW (12.7) 0.50 (61.0) (4.6) ø0.04 (1.02) ø0.08 (2.03) ICH50 to ICH150 IFH200 PIN CONNECTIONS Pin Function 1 +Vin
2 On/Off
3 Case
7 Trim
Dimensions are in inches (mm) Weight: 0.22 lbs (100 g) approx Case Material: ICH50/75/100/150 - Aluminium IFH200 - Aluminium baseplate with plastic case Input Voltage Output Voltage Output Current Input Current Efficiency Model Number(2) No Load Full Load(4) 18-36 VDC 2.5 V 20.00 A 50 mA 2705 mA 77% ICH10024S2V5 3.3 V 20.00 A 50 mA 3480 mA 79% ICH10024S3V3 5.0 V 20.00 A 50 mA 5020 mA 83% ICH10024S05 12.0 V 8.30 A 50 mA 4880 mA 85% ICH10024S12 15.0 V 6.70 A 50 mA 4925 mA 85% ICH10024S15 24.0 V 4.17 A 50 mA 4905 mA 85% ICH10024S24 36-75 VDC 2.5 V 20.00 A 50 mA 1335 mA 78% ICH10048S2V5 3.3 V 20.00 A 50 mA 1720 mA 80% ICH10048S3V3 5.0 V 20.00 A 50 mA 2480 mA 84% ICH10048S05 12.0 V 8.30 A 50 mA 2442 mA 85% ICH10048S12 15.0 V 6.70 A 50 mA 2463 mA 85% ICH10048S15 24.0 V 4.17 A 50 mA 2463 mA 85% ICH10048S24 Input Voltage Output Voltage Output Current Input Current Efficiency Model Number(2) No Load Full Load(4) 36-75 VDC 2.5 V 30.00 A 25 mA 2.10 A 74% ICH15048S2V5 3.3 V 30.00 A 25 mA 2.60 A 79% ICH15048S3V3 5.0 V 30.00 A 25 mA 3.70 A 83% ICH15048S05 12.0 V 12.50 A 25 mA 3.60 A 85% ICH15048S12 15.0 V 10.00 A 25 mA 3.60 A 85% ICH15048S15 24.0 V 6.25 A 25 mA 3.60 A 85% ICH15048S24 Input Voltage Output Voltage Output Current Input Current Efficiency Model Number(2) No Load Full Load(4) 36-75 VDC 2.5 V 40.00 A 25 mA 2.1 A 74% IFH20048S2V5 3.3 V 40.00 A 25 mA 3.5 A 79% IFH20048S3V3 5.0 V 40.00 A 25 mA 5.0 A 83% IFH20048S05 12.0 V 17.00 A 25 mA 5.0 A 85% IFH20048S12 15.0 V 13.30 A 25 mA 5.0 A 85% IFH20048S15 24.0 V 8.33 A 25 mA 5.0 A 85% IFH20048S24 28.0 V 7.14 A 25 mA 4.7 A 89% IFH20048S28 48.0 V 4.20 A 25 mA 4.7 A 90% IFH20048S48 Models & Ratings
Derating Curves ICH/IFH Series 0 10 20 30 40 50 60 70 80 90 100 Power Dissipated vs Ambient Temperature And Air Flow - ICH50-150S Ambient Temperature (˚C) Power Dissipated Pd (W) Natural Convection 20ft./min. (0.1 m/s) 100 ft./min. (0.5 m/s) 200 ft./min. (1.0 m/s) 300 ft./min. (1.5 m/s) 400 ft./min. (2.0 m/s) 500 ft./min. (2.5 m/s) 600 ft./min. (3.0 m/s) 700 ft./min. (3.5 m/s) 800 ft./min. (4.0 m/s) 0 10 20 30 40 50 60 70 80 90 100 Power Dissipated vs Ambient Temperature And Air Flow - IFH200S Ambient Temperature (C) Power Dissipated Pd (W) Natural Convection 20ft./min. (0.1 m/s) 100 ft./min. (0.5 m/s) 200 ft./min. (1.0 m/s) 300 ft./min. (1.5 m/s) 400 ft./min. (2.0 m/s) 500 ft./min. (2.5 m/s) 600 ft./min. (3.0 m/s) 700 ft./min. (3.5 m/s) 800 ft./min. (4.0 m/s) THERMAL RESISTANCE vs AIR FLOW Air Flow Rate Typical Rca Natural Convection 20 ft./min (0.1 m/s) 7.12 ˚C/W 100 ft./min (0.5 m/s) 6.21 ˚C/W 200 ft./min (1.0 m/s) 5.17 ˚C/W 300 ft./min (1.5 m/s) 4.29 ˚C/W 400 ft./min (2.0 m/s) 3.64 ˚C/W 500 ft./min (2.5 m/s) 2.96 ˚C/W 600 ft./min (3.0 m/s) 2.53 ˚C/W 700 ft./min (3.5 m/s) 2.37 ˚C/W 800 ft./min (4.0 m/s) 2.19 ˚C/W Temperature Rise = Pd x Rca Where Pd = Pin - Pout or Pout (1-η) / η Output may be trimmed by ±10% (±5% for dual output models) with a fixed resistor or an external trimpot as shown. ON/OFF -Vin A HIGH SIGNAL HERE WILL DISABLE OUTPUT +SENSE -SENSE TRIM DOWN TRIM UP TRIM +SENSE TRIM -SENSE 10K ohms TRIMPOT +Vo -Vo Ceramic 0.1 µF Solid tantalum 10 µF To Scope Resistor Load Output noise is measured with a 10 µF tantalum capacitor and 0.1 µF ceramic capacitor across output. Application Notes Remote On/Off Control External Output Trimming Output Noise LOGIC TABLE Logic State (Pin 2) Negative Logic Positive Logic Logic Low Switch Closed Mo dule On Module Off Logic High Switch Open Module Off Module On