IDC73D120T8M INFINEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Emitter Controlled 4 Medium Power Technology IDC73D120T8M
Datasheet 2 Rev. 2.1, 09.04.2021 Table of Contents
Datasheet 3 Rev. 2.1, 09.04.2021 Diode Chip in Emitter Controlled 4 Medium Power Technology Features:
- 1200V Emitter Controlled 4 technology 110µm chip
- Soft, fast switching
- Low reverse recovery charge
- Small temperature coefficient Recommended for:
- Low / medium power modules Applications:
- Low / medium power drives Chip Type VR IFn Die Size Package IDC73D120T8M 1200V 150A 9.00mm x 8.15mm Sawn on foil Mechanical Parameters Die size 9.00 x 8.15 mm2 Area total 73.35 Anode pad size See chip drawing Silicon thickness 110 µm Wafer size 200 mm Maximum possible chips per wafer 358 Passivation frontside Photoimide Pad metal 3.2µm AlSiCu Backside metal Ni Ag – system To achieve a reliable solder connection it is strongly recommended not to consume the Ni layer completely during production process Die bond Electrically conductive epoxy glue and soft solder Wire bond Al, 500µm Reject ink dot size (valid for inked delivery form only) 0.65mm; max 1.2mm Storage environment (<12 months) for original and sealed MBB bags Ambient atmosphere air, temperature 17°C – 25°C for open MBB bags Acc. IEC 62258-3; Section 9.4 Storage Environment.
Datasheet 4 Rev. 2.1, 09.04.2021 Maximum Ratings In general, from reliability and lifetime point of view, the lower the operation junction temperature and/or the applied voltage, the greater the expected lifetime of any semiconductor device. Not subject to production test, specified by design. Parameter Symbol Value Unit Repetitive peak reverse voltage, Tvj=25°C VRRM 1200 V Continuous forward current, limited by Tvj max 1 IF - A Maximum repetitive forward current, tp limited by Tvj max IFRM 300 Junction temperature Tvj -40...+175 C Operating junction temperature Tvj op -40...+150 C Static Characteristics (tested on wafer), Tvj=25°C Parameter Symbol Conditions Value Unit min. typ. max. Reverse leakage current IR VR=1200V - - 26 µA Cathode-anode breakdown voltage VBR IR=0.25mA 1200 - - V Forward voltage drop VF IF=45A 1.03 1.25 1.37
Electrical Characteristics
Not subject to production test, specified by design. Parameter Symbol Conditions Value Unit min. typ. max. Forward voltage drop Tvj=25°C VF IF=150A 1.35 1.70 2.05 V Tvj=150°C - 1.65 - Further Electrical Characteristics Switching characteristics and thermal properties are depending strongly on module design and mounting technology and can therefore not be specified for a bare die. 1 Depending on thermal properties of assembly.
Datasheet 5 Rev. 2.1, 09.04.2021 Chip Drawing A = Anode pad A
Datasheet 6 Rev. 2.1, 09.04.2021 Bare Die Product Specifics Test coverage at wafer level cannot cover all application conditions. Therefore it is recommended to test all characteristics which are relevant for the application at package level, including RBSOA and SCSOA.
Description
AQL 0.65 for visual inspection according to failure catalogue Electrostatic Discharge Sensitive Device according to MIL-STD 883
Revision History
Revision Subjects (major changes since last revision) Date 2.0 Final data sheet 22.08.2016 2.1 Editorial changes 09.04.2021
Datasheet 7 Rev. 2.1, 09.04.2021 Published by Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2021. All Rights Reserved. IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical value s stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non - infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer ’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitabili ty of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please c ontact your nearest Infineon Technologies office (www.infineon.com). Please note that this product is not qualified according to the AEC Q100 or AEC Q101 documents of the Automotive Electronics Council. WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.
Datasheet 8 Rev. 2.1, 09.04.2021 w w w . i n f i n e o n . c o m Published by Infineon Technologies AG