IC0505DA XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

1 Watt

  • Single Output
  • Ultra Slim DIP Package
  • Industry Standard Pinout
  • 1500 VDC Isolation Standard
  • MTBF >3.5 MHrs
  • -40 °C to +85 °C Operation
  • 3 Year Warranty IC Series Input Input Voltage Range • Nominal ±10% Input Reverse Voltage • None Protection Output Output Voltage • See table Minimum Load • 10% Line Regulation • 1.2%/1%∆ Vin Load Regulation • 10% to 100% load change, 5 Vout: 12.8% typ, 15% max, 12 Vout: 6.8% typ, 15% max, 15 Vout: 6.8% typ, 15% max Setpoint Accuracy • 100-110% of nominal at 10% load Ripple & Noise • 75 mV pk-pk 20 MHz bandwidth Temperature Coefficient• 0.03%/°C Short Circuit Protection• Continuous, auto recovery General Efficiency • See table Isolation Voltage • 1500 VDC minimum, 3000 VDC optional(1), tested for 1 minute Isolation Resistance • 109 Ω Isolation Capacitance• 25 pF typical Switching Frequency • 100 kHz typical at nominal input, full load MTBF • >3.5 MHrs to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature• -40 °C to +85 °C Storage Temperature • -55 °C to +125 °C Case Temperature • 105 °C max Cooling • Convection-cooled Lead Temperature • 250 °C, 0.06 in (1.5 mm) from case, 10 s xppower.com Input Voltage Output Voltage Output Current Efficiency (typ) Model Number

5 VDC

5.0 V 200 mA 74% IC0505DA (1)

12.0 V 83 mA 77% IC0512DA

15.0 V 67 mA 76% IC0515DA

12 VDC 5.0 V 200 mA 73% IC1205DA Mechanical Details 12 5 6 7 814 Side View Top View 0.02 (0.5) 0.260 (6.60) 0.300 (7.62) 0.30 (7.6) 0.100 (2.54) 0.600 (15.24) 0.768 (19.50) 0.03 (1.0) 0.17 (4.5) 0.02 (0.5) 12 5 6 7 814 0.10 (2.5) 0.10 (2.5) ø 0.03 (ø 1.0) Pin Function

1 Vin

2 GND

7 N.C. 8 N.C. 14 N.C. N.C. Not connected 1. IC0505DA available with 3000 VDC isolation, add suffix ‘ -H’ to part number. 1. All dimensions in inches (mm) 2. Tolerance: ±0.010 (±0.25) 3. Weight: 0.003 lbs (1.4 g) 4. Pin tolerance: ±0.004 (±0.10 mm) Notes Recommended footprint Top view grid: 0.1 x 0.1 in (2.54 x 2.54 mm) Notes