IAB01 XP-Power-Limited

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • Unregulated dual outputs
  • ±10% input range
  • Dual outputs ±3.3 to ±24VDC
  • SIP7 package
  • 1.5kVDC functional isolation
  • Short circuit protection
  • Class B conducted & radiated emissions
  • -40˚C to +105˚C operation
  • Full load to 100˚C ambient
  • 3 year warranty Dimensions TechnologyIndustrial Electronics Instrumentation Robotics (1)

DC-DC CONVERTERIAB01 Series General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 80 % See models & ratings table Isolation: Input to Output 1500 VDC 60s test, functional isolation Isolation Resistance 109 Ω Isolation Capacitance 20 pF Switching Frequency 260 kHz 100% load Power Density 14 W/in3 Mean Time Between Failure 3.5 Mhrs MIL-HDBK-217F , +25°C GB Weight 0.004 (2.1) lb (g) Case Material Black plastic, flame retardant UL94V-0 Pin Material Phospher bronze, solder coated Solder Profile 300 °C 1.5mm from case 10s max Water Wash Use deionized water. Dry thoroughly Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 48 VDC See Models & Ratings table Initial Set Accuracy % See regulation curves Minimum Load 10 % Minimum load required to meet specification. Operation at no load will not cause damage Line Regulation ±1.2 Per 1% change of input voltage ±1.5 3.3V output models, per 1% change of input voltage Load Regulation % From 10% to full load. See regulation curves Cross Regulation 5 % When one load is varied between 25% and 100% and other is fixed at 100% Ripple & Noise mV pk-pk Measured using parallel cable, 20MHz bandwidth and 10µF ceramic capacitor 100 24V output models, measured using parallel cable, 20MHz bandwidth and 10µF ceramic capacitor Short Circuit Protection Continuous, with autorecovery Maximum Capacitive Load See Models & Ratings table Temperature Coefficient ±0.02 %/ ˚C 100% load Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage Range 4.5 5.5 VDC 5V nominal 10.8 13.2 12V nominal 13.5 16.5 15V nominal 21.6 26.4 24V nominal Input Filter Capacitor Input Reflected Ripple 15 mA pk-pk Measured through 4.7µH inductor and 220µF capacitor Input Surge -0.7 9 VDC 5V models, 1s -0.7 18 12V models, 1s -0.7 21 15V models, 1s -0.7 30 24V models, 1s

Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 °C IAB0105: derate from 100% load at +85°C to 80% load at +105°C Others: derate from 100% load at +100°C to 80% at +105°C Storage Temperature -55 +125 °C Humidity 95 %RH Non-condensing Cooling Natural convection DC-DC CONVERTERIAB01 Series EMC: Emissions Phenomenon Standard T est Level Notes & Conditions Conducted EN55032 Class B See application notes Radiated EN55032 Class B See application notes Safety Approvals Safety Agency Standard Notes & Conditions UL UL/cUL62368-1 ITE CE Meets all applicable directives UKCA Meets all applicable legislation EMC: Immunity Phenomenon Standard T est Level Criteria Notes & Conditions ESD Immunity EN61000-4-2 3 B Air ±8kV, Contact ±6kV Radiated Immunity EN61000-4-3 3 A 10V/m

DC-DC CONVERTERIAB01 Series Fig 4. Temperature Derating Curve 110% 115% 105% 102.5% 97.5% 92.5% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 112% 105% 102% 95% 88% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 108% 103% 98% +2.5% -2.5% -7.5% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 120 100 -40- 20 04 06 020 80 100 105 120 Output Power (%) Opera/g2462ngTemperature (°C) 110% 115% 105% 102.5% 97.5% 92.5% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 112% 105% 102% 95% 88% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 108% 103% 98% +2.5% -2.5% -7.5% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 120 100 -40- 20 04 06 020 80 100 105 120 Output Power (%) Opera/g2462ngTemperature (°C) 110% 115% 105% 102.5% 97.5% 92.5% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 112% 105% 102% 95% 88% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 108% 103% 98% +2.5% -2.5% -7.5% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 120 100 -40- 20 04 06 020 80 100 105 120 Output Power (%) Opera/g2462ngTemperature (°C) 110% 115% 105% 102.5% 97.5% 92.5% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 112% 105% 102% 95% 88% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 108% 103% 98% +2.5% -2.5% -7.5% 10% 20% 40% 60% Max. Typ. Min. 80% 100% Output Voltage Accuracy Output Current Percentage (Nominal Input Voltage) 120 100 -40- 20 04 06 020 80 100 105 120 Output Power (%) Opera/g2462ngTemperature (°C) Typical Performance Curves Fig 1. 3.3VDC Output Fig 2. 5/9/12/15/24VDC Output applies to IAB0105 Fig 3. 5/12/15/24VDC Output Application Notes LH -Vin -Vin +Vin EMC (Class B) Compliance Circuit - Dual Model Number Dual Vout (V) C1 C2 C3 C4 C5 LH IAB0105 ±3.3 4.7µF/25V 4.7µF/25V 4.7µF/16V 4.7µF/16V Not fitted 6.8µH ±9 1.0µF/25V 1.0µF/25V±12 1nF/2kV±15 0.47µF/50V 0.47µF/50V±24 IAB0112, 15, 24 ±3.3 4.7µF/50V 4.7µF/50V 4.7µF/16V 4.7µF/16V 270pF/2kV 6.8µH ±12 1.0µF/25V 1.0µF/25V ±15 0.47µF/25V 0.47µF/25V ±24 0.47µF/50V 0.47µF/50V

DC-DC CONVERTERIAB01 Series Specifications subject to change without notice. 5519 July 2022 Pin Connections Pin Function 1 +Vin 2 -Vin

3 No pin

5 Common

7 No pin

0.100 (2.54) ø0.03 9 (ø1.00) 0.400 (10.16) THIRD ANGLE PROJ . 0.020 (0.50) 0.400 (10.16) 0.161 (4.10) 0.774 (19.65) 0.400 (10.16) FRONT VIEW 0.24 (6.00) 0.012 (0.30)0.201 (5.10) 0.020 (0.50) 1 2 4 6 NOTES: UNITS: mm [inch] PIN SECTION TOLERANCES: 0.10 [ 0.004] GENERAL TOLERANCES: 0.25 [ 0.010] FOOTPRINT - SINGLE OUTPUT Top View 1 2 4 5 6 Pin-Out Pi n SINGLE DUA L

1 Vin Vin

2 GND GND

3 (NO PIN) (NO PIN ) 4 0 V - Vo 5 (NO PIN) 0 V 6+ Vo + Vo 0.100 (2.54) typ. ø0.03 9 (ø1.00 ) 0.400 (10.16) Top View 1 2 4 6 0.400 (10.16) 0.24 (6.0) Front View Bo/g130om View Printe d Face 1. All dimensions are in inches (mm) 2. Weight: 0.004lbs (2.1g) approx. 4. Pin pitch tolerance: ±0.014 (±0.35) 5. Case tolerance: ±0.02 (±0.5) Notes: