IA1215D

IA1215D XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 1

Technical content

1 Watt

• Dual Output
• SIP or DIP Package
• Industry Standard Pinout
• 1000 VDC Isolation
• -40 °C to +85 °C Operation
• MTBF >1.1 MHrs
• 3 Year Warranty IA Series Input Input Voltage Range • Nominal ±10%(5) Input Reflected • 20 mA pk-pk (through 12 µH inductor 5 Hz Ripple Current to 20 MHz) Input Reverse Voltage• None Protection Output Output Voltage • See table Minimum Load • None(6) Line Regulation • 1.2%/1% ∆ Vin Load Regulation • 10% 20-100% load change (3.3 V models ±20%) Setpoint Accuracy • ±3% Ripple & Noise • 75 mV pk-pk max, 20 MHz bandwidth Temperature Coefficient• 0.02%/°C Maximum Capacitive • ±100 µF Load General Efficiency • See table Isolation Voltage • 1000 VDC minimum Isolation Resistance • 10 9 Ω Isolation Capacitance• 60 pF typical Switching Frequency • Variable, 80 KHz typical MTBF • >1.12 MHrs to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature• -40 °C to +85 °C Storage Temperature • -40 °C to +125 °C Case Temperature • 100 °C max Cooling • Convection-cooled xppower.com Input Voltage Output Voltage Output Current(4) Efficiency Model Number (1) 3.3 VDC ±5.0 V ±100 mA 66% IA0305S

5 VDC

±3.3 V ±151 mA 65% IA0503S ±5.0 V ±100 mA 74% IA0505S ±9.0 V ±55 mA 78% IA0509S ±12.0 V ±42 mA 78% IA0512S ±15.0 V ±33 mA 80% IA0515S ±24.0 V ±21 mA 80% IA0524S

12 VDC

±3.3 V ±151 mA 66% IA1203S ±5.0 V ±100 mA 75% IA1205S ±9.0 V ±55 mA 76% IA1209S ±12.0 V ±42 mA 78% IA1212S ±15.0 V ±33 mA 80% IA1215S ±24.0 V ±21 mA 76% IA1224S

24 VDC

±3.3 V ±151 mA 68% IA2403S ±5.0 V ±100 mA 74% IA2405S ±9.0 V ±55 mA 76% IA2409S ±12.0 V ±42 mA 78% IA2412S ±15.0 V ±33 mA 78% IA2415S ±24.0 V ±21 mA 78% IA2424S

48 VDC(5)

±3.3 V ±151 mA 60% IA4803S ±5.0 V ±100 mA 70% IA4805S ±9.0 V ±55 mA 72% IA4809S ±12.0 V ±42 mA 74% IA4812S ±15.0 V ±33 mA 74% IA4815S ±24.0 V ±21 mA 70% IA4824S Mechanical Details 0.24 (6.09) max(2) 0.76 (19.30) max 0.40 (10.16) max 0.80 (20.32) max 0.25 (6.35) max(3) 0.11 (2.79) min 0.3 (7.62) 0.01 (0.254) max +Vin -Vout 0V+Vout -Vin NC 0.3 (7.62) 0.60 (15.24) 0.01 (0.254) max +Vin -Vout 0V +Vout-Vin 0.055 (1.40) 0.18 (4.57) 0.5 (12.70) 0.4 (10.16) max 0.02 (0.5) 0.12 (3.05) min 0.1 (2.54) 0.02 (0.51)0.02 (0.51) 1. Replace ‘S’ in model number with ‘D’ for DIP package. 2. SIP 48 Vin models, dimension is 0.28 (7.20) max. 3. DIP 48 Vin models, dimension is 0.27 (6.88) max. 4. Outputs power-trade. 5. For 48 V models a 10 µF capacitor is required between +Vin and -Vin pins. 6. Operation at no load will not damage unit but it may not meet all specifications. 7. All dimensions in inches (mm). 8. Pin pitch tolerance: ±0.014 (±0.35) 9. Case tolerance ±0.02 (±0.5) Notes