I4001-6XXT4827A ILLUMINANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Datasheet sections
PRODUCT SPECIFICATION FOR LCM CUSTOMER: MODEL NO: I4001-6XXT4827A ACCEPTED BY: APPROVED BY: CHECKED BY: ORGANIZED BY: ▓▓▓▓Approval for Specifications Only □□□□Approval for Specifications and Sample Note: 1. Version of Specifications : 1 2. Others: Rohs Compliment TAIW AN 1F, #15, LANE 75, MIN CHUAN E. RD., SEC 3, TAIPEI, TAIWAN. Tel +886-2-25175115 Fax +886-2-25175099 CHINA 5F DONGWU COMMERICAL BLDG ., LANSHAN RD., NORTH DISTRICT, HI-TECH INDUSTRIAL PARK, SHENZHEN, PRC. TEL + 86-755-86154466 FAX +86-755-86154366 KOREA RM 1201, IT MIRAE TOWER, 60-21, GASAN-DONG , GEUMCHEON-GU, SEOUL, 153-801, KOREA TEL + 82-2-2027-5391~2 FAX +82-2-2027-5393 IIILLLLLLUUUMMMIIINNNAAANNNTTT 北北北極極極光光光企企企業業業有有有限限限公公公司司司 贺秋 芳贺秋 芳贺秋 芳贺秋 芳 2008.09. 27 贺秋 芳贺秋 芳贺秋 芳贺秋 芳 2008.09.27 隆茂 生隆茂 生隆茂 生隆茂 生 2008.09. 27
IIILLLLLLUUUMMMIIINNNAAANNNTTT Version Date Contents 1 08/09/27 Initial Release
IIILLLLLLUUUMMMIIINNNAAANNNTTT 1. Mechanical Specification Item Standard Value Unit Display Size 4.0 inch Module Dimension 98.3(W)*62.6(H)*6.15(D) mm Active Area 87.84(W)*49.776(H) mm Number of Dots 480RGB*272Dots Dot Pixel Arrangement RGB Stripe type - Pixel Pitch 0.183(W)mm*0.183(H)mm mm LCD Type Normal White / Transmissive type - Viewing Direction 6H - Approx. Weight TBD g Various Color Display 16.7M color - Backlight Color White
IIILLLLLLUUUMMMIIINNNAAANNNTTT
IIILLLLLLUUUMMMIIINNNAAANNNTTT 2. Absolute Maximum Ratings Item Symbol Min. Typ. Max. Unit Remark Supply Voltage for Logic V DD -0.3 +6 V Input Voltage Vin -0.5 V DD +0.5 V Operating Temperature T OP -20 - +70 ℃℃℃℃ - Storage Temperature T ST -30 - +80 ℃℃℃℃ - *NOTE: Based on Vss=0V . 3. Electrical Characteristics Item Symbol Condition Min. Typ. Max. Unit Supply Voltage for Logic VCC Ta=25℃℃℃℃ 3.0 3.3 3.6 V High-level Input Voltage VIHC Vcc=3.3V 0.7 VDD V DD Low-level Input Voltage VILC Vcc=3.3V 0 0.3 V DD 4. T/P Characteristics Item Min. Typ. Max. Unit Remark Linearity - - 1.5 % Resistance between Terminals 500 - 1500 /uni2126 X (Film Side) 200 - 900 /uni2126 Y (Film Side) Insulation Resistance 20M - - /uni2126 Operation Voltage - - 5 V Response Time - - 10 ms Transmittance - 80 - % Haze 4 8 12 %
IIILLLLLLUUUMMMIIINNNAAANNNTTT 5. Optical Characteristics: The following items are measured under stable conditions. The optical characteristics should be measured in dark room or equivalent state with the methods shown in Note Item Symbol Condition Min. Typ. Max. Unit Remark Brightness (W/O T/P) 300 320 - cd/m 2 Response time TR + T F Θ = 0 - 30 - ms Note 2 Contrast Ratio CR At the center point of A.A. 300 350 - Note 3 Color Chromaticity White WX Θ = 0 0.273 0.313 0.353 Note 4 WY 0.289 0.329 0.369 Viewing Angle Horizontal CR ≥10 100 120 - Degree Note 5 Vertical 90 105 - Ta=25 ±2℃ Note: Test equipment setup After stabilizing and leaving the panel alone at a given temperature for 0 minutes, the measurement should be executed. Measurement should be executed in a stable windless, and dark room. Optical specifications are measured by Topcon BM-5A with a viewing angle of 2 ° at a distance of 50cm and normal direction. Definition of response time : T R and T F The figure below is the output signal of the photo detector.
IIILLLLLLUUUMMMIIINNNAAANNNTTT Definition of Contrast Ratio : Contrast Ratio (CR) = Brightness measured wh en LCD is at “White state” Brightness measure when LC D is at “Black state” White V i = V i50% ±1.5V Black V i = V i50% 2.0V “±” means that the analog input signal swings in ph ase with VCOM signal. “ ” means that the analog input signal swings out of phase with VCOM signal. Vi50% : The analog input voltage when transmission is 50%. The 100% transmission is defined as the transmission of LCD panel when all the input terminals of module are electrically opened. Measured at the center area of the panel when all the input terminals of LCD panel are electrically opened. Definition of viewing angle :
IIILLLLLLUUUMMMIIINNNAAANNNTTT 6. Interface No. Symbol Function Remark
1 VSS Ground
2 VSS Ground
3 VCC Power Supply
4 VCC Power Supply
5 R0 Red Data Bit 0
6 R1 Red Data Bit 1
7 R2 Red Data Bit 2
8 R3 Red Data Bit 3
9 R4 Red Data Bit 4
10 R5 Red Data Bit 5
11 R6 Red Data Bit 6
12 R7 Red Data Bit 7
13 G0 Green Data Bit 0
14 G1 Green Data Bit 1
15 G2 Green Data Bit 2
16 G3 Green Data Bit 3
17 G4 Green Data Bit 4
18 G5 Green Data Bit 5
19 G6 Green Data Bit 6
20 G7 Green Data Bit 7
21 B0 Blue Data Bit 0
22 B1 Blue Data Bit 1
23 B2 Blue Data Bit 2
24 B3 Blue Data Bit 3
25 B4 Blue Data Bit 4
26 B5 Blue Data Bit 5
27 B6 Blue Data Bit 6
28 B7 Blue Data Bit 7
29 VSS Ground
30 DCLK Dot data clock input
31 DISP Display on/off control Note 1
32 HSYNC Horizontal sync input
33 VSYNC Vertical sync input
34 DE Data enable control Note 2
IIILLLLLLUUUMMMIIINNNAAANNNTTT
35 U/D Shift up or Down control Note 3
36 L/R Shift left or Right control Note 4
37 VSS Ground
38 VSS Ground
39 X1 T/P right
40 Y1 T/P bottom
41 X2 T/P left
42 Y2 T/P up
43 VSS Ground
44 VSS Ground
45 VSS Ground
46 VLED- LED ground
47 VLED+ LED power
48 VSS Ground
49 VSS Ground
50 VSS Ground
Note : 1. DISP set “High”, input data are valid. DISP set “Lo w”, input data are invalid. 2. DE is “High”, data can be access. DE s “Low”, data can not be access. 3. U/D set “High”_scan from UP to Down. U/D set “Low”_ Down to UP. 4. L/R set “High” scan from Left to Right. L/R set “Lo w” scan form Right to Left.
IIILLLLLLUUUMMMIIINNNAAANNNTTT 7. Timing Control Item Symbol Min. Typ. Max. Unit CLK/Hsync /Vsync CLK cycle t CLK - 9 15 MH Z Hsync cycle 1/th - 17.14 - KH Z Vsync cycle 1/tv - 59.94 - H Z Horizontal cycle Horizontal cycle th 525 CLK Horizontal display period thd 480 CLK Horizontal front porch thf 2 - - CLK Horizontal pulse width thp 2 41 - CLK Horizontal back porch thb 2 2 - CLK Vertical cycle Vertical cycle tv - 286 - H Vertical display period tvd - 272 - H Vertical front porch tvf 1 2 - H Vertical pulse width tvp 1 10 - H Vertical back porch tvb 1 2 - H
IIILLLLLLUUUMMMIIINNNAAANNNTTT 8. Backlight
8.1 Standard Lamp Styles (Edge Lighting Type):
The LED chips are distributed over the edge light a rea of the illumination unit, which gives the less power consumption:
8.2 The Main Advantages of the LED Backlight are as Following:
The brightness of the backlight can simply be adjusted by a resistor or a potentiometer.
8.3 Data About LED Backlight:
Item Symbol Conditions Min. Typ. Max. Unit Forward voltage Vf If =20 21.7 23.1 25.2 V Forward current If - 20 - mA Uniformity - If=20 75% - - - Luminous color - White Chip connection - 7-LED Serial connection NOTE: 1.Backlight Only Average Luminous Intensity of P1- P9 2.Uniformity = Min(P1~P9)/Max(P1~P9) * 100%>80%
8.4 Measured Method:
(Effective spatial Distribution) Hole Diameter ±1ø ; 1 to 9per Position Measured Luminous