DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Key Features:  20W Output Power  2:1 Input Range  Ultra- Miniature Case  Optional Remote Control  1,600 VDC Isolation  >800 kHour MTBF  Standard Pin-Out I2000RW Ultra-Miniature 20W Wide 2:1 Input Range DC/DC Con vert ers Series Input Parameter Conditions Min. Typ. Max. Units Input Voltage Range 12 VDC Input 9.0 12.0 18.0 VDC24 VDC Input 18.0 24.0 36.0 48 VDC input 36.0 48.0 75.0 Input Filter LC Filter Output Parameter Conditions Min. Typ. Max. Units Output Voltage Accuracy Positive ±2.0 % Line Regulation Vin = Min to Max ±0.5 % Load Regulation Iout = 10% to 100% ±1.0 % Ripple (20 MHz) (Note 1) 3.3V, 5V Output Models 75 mV P - P12V, 15V Output Models 100 Noise (20 MHz) (Note 1) 3.3V, 5V Output Models 100 mV P - P12V, 15V Output Models 125 Output Power Protection See Note 2 120 % Over Voltage Protection Zener Diode Clamp Temperature Coeffi cient ±0.02 %/ºC Output Short Circuit Continuous (Autorecovery) General Parameter Conditions Min. Typ. Max. Units Isolation Voltage 60 Seconds 1,600 VDC Isolation Resistance 500 VDC 100 M Isolation Capacitance 100 kHz, 1V 1,000 pF Switching Frequency 3.3V, 5V Output Models 450 kHz12V, 15V Output Models 300 Environmental Parameter Conditions Min. Typ. Max. Units Operating Temperature Range Ambient -40 +25 +85 ºC Operating Temperature Range Case +105 ºC Storage Temperature Range -55 +105 ºC Cooling Free Air Convection Derating See Curve Humidity RH, Non-condensing 95 % Physical Case Material Six-Sided Shielded Aluminum With Non-Conductive Base (UL94-V0) Weight 0.52 Oz (15g) Reliability Specifi cations Parameter Conditions Min. Typ. Max. Units MTBF MIL HDBK 217F , 25ºC, Gnd Benign 800 kHours Absolute Maximum Ratings Parameter Conditions Min. Typ. Max. Units Input Voltage Surge (1 Sec) 12 VDC Input -0.7 20.0 VDC24 VDC Input -0.7 40.0 48 VDC Input -0.7 80.0 Lead Temperature 1.5 mm From Case For 10 Sec 300 ºC Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings. MicroPower Direct

292 Page Street

Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com www.micropowerdirect.com Electrical Specifi cations Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.

Notes:

  • All dimensions are typical in inches (mm)
  • Tolerance x.xx = ±0.01 (±0.25)
  • Pin 1 is marked by a “dot” on the top of the unit Model Number Input Output Over Voltage Protection (VDC) Effi ciency (%, Typ) Capacitive Load (µF Max) Fuse Rating Slow-Blow (mA) Voltage (VDC) Current (mA) Voltage (VDC) Current (mA, Max) Current (mA, Min)Nominal Range Full-Load No-Load I2001RW 12 9.0 - 18.0 1,961 90 3.3 4,500 450 4.6 85 2,000 4,000 I2002RW 12 9.0 - 18.0 1,873 90 5.0 4,000 400 6.2 89 2,000 4,000 I2003RW 12 9.0 - 18.0 1,873 50 12.0 1,660 166 15.5 88 470 4,000 I2004RW 12 9.0 - 18.0 1,873 50 15.0 1,330 133 18.6 88 330 4,000 I2011RW 24 18.0 - 36.0 986 45 3.3 4,500 450 4.6 86 2,000 2,000 I2012RW 24 18.0 - 36.0 936 45 5.0 4,000 400 6.2 89 2,000 2,000 I2013RW 24 18.0 - 36.0 936 25 12.0 1,660 166 15.5 89 470 2,000 I2014RW 24 18.0 - 36.0 936 25 15.0 1,330 133 18.6 89 330 2,000 I2021RW 48 36.0 - 75.0 496 28 3.3 4,500 450 4.6 84 2,000 1,000 I2022RW 48 36.0 - 75.0 473 28 5.0 4,000 400 6.2 88 2,000 1,000 I2023RW 48 36.0 - 75.0 473 15 12.0 1,660 166 15.5 88 470 1,000 I2024RW 48 36.0 - 75.0 473 15 15.0 1,330 133 18.6 88 330 1,000 Pin Function 1+ V i n 2- V i n

3 Control (Optional)

5 No Pin

Notes: 1. When measuring output ripple, it is recommended that an external ceramic capacitor (approx 0.1 µF) be placed from the +Vout pin to the -Vout pin. 2. Unit recovers automatically from an over power condition once the fault is removed. 3. It is recommended that the units not be operated with a load under 10% of full load. Operation at no-load will not damage the unit, but they may not meet all specifi cations. 4. The On/Off Control input (Pin 3) is referenced to -Vin (Pin 1). If it is not used, the control pin should be left open. 5. It is recommended that a fuse be used on the input of a power supply for protection. See the Model Selection table above for the correct rating. www.micropowerdirect.comModel Selection Guide Mechanical Dimensions Pin Connections MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072  TEL: (781) 344-8226  FAX: (781) 344-8481  E-Mail: sales@micropowerdirect.com Min Max On 5.0 VDC 15.0 VDC Off 0.0 VDC 0.3 VDC In. Current (on) -1 mA In. Current (off) 1 mA