HV100LF WILCOXON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USA An Amphenol Company Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com 99217 Rev.B.3 09/18 HV100LF and HV200LF series Low-frequency, high EMI resistance accelerometers Key features

  • Ultra low-frequency measurements
  • Case-base isolated up to 6 kV
  • Ideal for power generation

applications

  • Rapid shock recovery
  • Improved EMI resistance
  • Manufactured in an approved ISO 9001 facility Certifications Wilcoxon’s HV series are designed for low-frequency applications where high electrical isolation between the sensor and machine is required. HV sensors can withstand arcing between the sensor base and its internal electronics to levels as high as 6,000 volts. The sensors offer improved EMI resistance in areas where high electromagnetic interference occurs, such as wind turbines, railway systems and other high-voltage generators. Improvements in EFT and ESD resistance improve survivability during extreme transient events. The HV100LF/200LF series has superior performance down to 0.1 Hz. HV models Output connector Integral mounting Sensitivity HV100LF 4 pin, M12 M8 x 1.25 100 mV/g HV100LF-500 500 mV/g HV101LF 1/4-28 UNF 100 mV/g HV101LF-500 500 mV/g HV102LF 100 mV/g HV102LF-500 500 mV/g HV200LF 2 pin, MIL-5015 1/4-28 UNF 100 mV/g HV200LF-500 500 mV/g HV201LF M8 x 1.25 100 mV/g HV201LF-500 500 mV/g HV202LF 100 mV/g HV202LF-500 500 mV/g Models available

Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USA An Amphenol Company Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. 99217 Rev.B.3 09/18 HV100LF and HV200LF series Low-frequency, high EMI resistance accelerometers SPECIFICATIONS See page 3 for further specifications, dimensions and drawings. LF series LF-500 series Sensitivity, ± 5%, 25°C 100 mV/g 500 mV/g Acceleration range, VDC > 22 V 80 g peak 10 g peak Amplitude nonlinearity 1% Frequency response: ± 5% ± 10% ± 3 dB 0.35 - 5,000 Hz 0.25 - 7,000 Hz 0.1 - 11,000 Hz Resonance frequency, nominal 28 kHz Transverse sensitivity, max 5% of axial Temperature response: –25°C +120°C –10% +15% Temperature range –50° to +120° C Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Dielectric withstand voltage between connector and surface: 6,000 VDC 5,000 VAC 1 min. 1 min. Electrical noise, equiv. g: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 400 µg rms 10 µg/√Hz 5 µg/√Hz 5 µg/√Hz 250 µg rms 3 µg/√Hz 2 µg/√Hz 2 µg/√Hz Output impedance, max 100 Ω 300 Ω Impedance, between connector and base: DC 100 Hz 1.0 kHz 10 kHz >100 GΩ >100 MΩ >10 MΩ >1 MΩ Bias output voltage 13 VDC Grounding case isolated, internally shielded Vibration limit 500 g peak Shock limit 5,000 g peak Electromagnetic sensitivity, equiv. g, max 70 µg/gauss Sealing hermetic Base strain sensitivity, max 0.0002 g/μstrain Sensing element design PZT, shear Sensor case material stainless steel Isolation material ceramic Recommended cabling J10 / J9T2A Connections - HV100LF series Function Connector pin signal P1 to pin 3 inner shield P2 common P3 case P4 connector shell case buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com Connections - HV200LF series Function Connector pin signal A common B connector shell case

Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USA An Amphenol Company Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. 99217 Rev.B.3 09/18 buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com HV100LF series SPECIFICATIONS HV100LF/HV100LF-500 HV101LF/HV101LF-500 HV102LF/HV102LF-500 Output connector1 4 pin M12 4 pin M12 4 pin M12 Integral mounting M8 x 1.25 1/4-28 UNF M6 x 1.00 Dimensions: A B C 1.98 in. (50.3 mm) 0.33 in. (8.4 mm) 1.21 in. (30.8 mm) 1.98 in. (50.3 mm) 0.33 in. (8.4 mm) 1.21 in. (30.8 mm) 1.98 in. (50.3 mm) 0.33 in. (8.4 mm) 1.21 in. (30.8 mm) Weight 126 grams (4.44 oz) 126 grams (4.44 oz) 126 grams (4.44 oz) HV200LF series SPECIFICATIONS HV200LF/HV200LF-500 HV201LF/HV201LF-500 HV202LF/HV202LF-500 Output connector1 2 pin MIL-5015 2 pin MIL-5015 2 pin MIL-5015 Integral mounting 1/4-28 UNF M8 x 1.25 M6 x 1.00 Dimensions: A B C 2.21 in. (56.0 mm) 0.33 in. (8.4 mm) 1.21 in. (30.8 mm) 2.21 in. (56.0 mm) 0.33 in. (8.4 mm) 1.21 in. (30.8 mm) 2.21 in. (56.0 mm) 0.33 in. (8.4 mm) 1.21 in. (30.8 mm) Weight 122 grams (4.35 oz) 122 grams (4.35 oz) 122 grams (4.35 oz) Notes: 1 For best performance, it is recommended that the connector shell be tied to the cable shield. Recommended connector: R75S Notes: 1 For best performance, it is recommended that the connector shell be tied to the cable shield. Recommended connector: R6Q