HV100 WILCOXON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USA An Amphenol Company Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com 99190 Rev.B2 12/21 HV100 and HV200 series High EMI resistance accelerometers Key features

  • Case-base isolated up to 6 kV
  • Ideal for power generation

applications

  • Rapid shock recovery
  • Improved EMI resistance
  • Manufactured in an approved ISO 9001 facility Certifications Wilcoxon’s HV series are designed for demanding applications requiring high electrical isolation between the sensor and machine. HV sensors can withstand arcing between the sensor base and its internal electronics to levels as high as 6,000 volts. The sensors offer improved EMI resistance in areas where high electromagnetic interference occurs, such as wind turbines, railway systems and other high-voltage generators. Improvements in EFT and ESD resistance improve survivability during extreme transient events. The HV series are available with a variety of mounting options to ensure compatibility with every application. HV models Output connector Integral mounting HV100 4 pin, M12 M8 x 1.25 HV101 1/4-28 UNF HV102 M6 HV200 2 pin, MIL-5015 1/4-28 UNF HV201 M8 x 1.25 HV202 M6 Models available

Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USA An Amphenol Company Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. 99190 Rev.B2 12/21 HV100 and HV200 series High EMI resistance accelerometers SPECIFICATIONS See page 3 for further specifications, dimensions and drawings. Sensitivity, ± 5%, 25°C 100 mV/g Acceleration range, VDC > 22 V 80 g peak Amplitude nonlinearity 1% Frequency response: ± 5% ± 10% ± 3 dB 3 - 5,000 Hz 1 - 7,000 Hz 0.5 - 12,000 Hz Resonance frequency 25 kHz Transverse sensitivity, max 5% of axial Temperature response: –40°C +120°C –10% +10% Temperature range –40° to +120° C Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Dielectric withstand voltage between connector and surface: 6,000 VDC 5,000 VAC 1 min. 1 min. Electrical noise, equiv. g: Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1,000 Hz 700 µg 10 µg/√Hz 5 µg/√Hz 5 µg/√Hz Output impedance 100 Ω Impedance, between connector and base: DC 100 Hz 1.0 kHz 10 kHz >100 GΩ >100 MΩ >10 MΩ >1 MΩ Bias output voltage 12 VDC Grounding case isolated, internally shielded Vibration limit 500 g peak Shock limit 5,000 g peak Electromagnetic sensitivity, equiv. g, max 70 µg/gauss Sealing hermetic Base strain sensitivity <0.0002 g/μstrain Sensing element design PZT, shear Sensor case material stainless steel Isolation material ceramic Recommended cabling J10 / J9T2A Connections - HV100 series Function Connector pin signal P1 to pin 3 inner shield P2 common P3 case P4 connector shell case buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com Connections - HV200 series Function Connector pin signal A common B connector shell case

Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USA An Amphenol Company Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. 99190 Rev.B2 12/21 buy.wilcoxon.com www.wilcoxon.com Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com HV100 series SPECIFICATIONS HV100 HV101 HV102 Output connector1 4 pin M12 4 pin M12 4 pin M12 Mounting torque, recommended 40 in-lb / 4.5 Nm 30 in-lb / 3.4 Nm 30 in-lb / 3.4 Nm Dimensions: A B C 1.93 in. (49.5 mm) 0.325 in. (8.3 mm) 1.21 in. (31.0 mm) 1.93 in. (49.5 mm) 0.325 in. (8.3 mm) 1.21 in. (31.0 mm) 1.93 in. (49.5 mm) 0.325 in. (8.3 mm) 1.21 in. (31.0 mm) Weight 126 grams (4.44 oz) 126 grams (4.44 oz) 126 grams (4.44 oz) HV200 series SPECIFICATIONS HV200 HV201 HV202 Output connector1 2 pin MIL-5015 2 pin MIL-5015 2 pin MIL-5015 Mounting torque, recommended 30 in-lb / 3.4 Nm 40 in-lb / 4.5 Nm 30 in-lb / 3.4 Nm Dimensions: A B C 2.15 in. (55.1 mm) 0.325 in. (8.3 mm) 1.21 in. (31.0 mm) 2.15 in. (55.1 mm) 0.325 in. (8.3 mm) 1.21 in. (31.0 mm) 2.15 in. (55.1 mm) 0.325 in. (8.3 mm) 1.21 in. (31.0 mm) Weight 122 grams (4.35 oz) 122 grams (4.35 oz) 122 grams (4.35 oz) Notes: 1 For best performance, it is recommended that the connector shell be tied to the cable shield. Recommended connector: R75S Notes: 1 For best performance, it is recommended that the connector shell be tied to the cable shield. Recommended connector: R6Q