HV089WX1-100 AZDISPLAYS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 27
Technical content
Datasheet sections
- 1.0 General Description
- 2.0 Absolute Maximum ratings
- 3.0 Electrical specifications
- 4.0 Optical specifications
- 5.0 Interface Connection
- 6.0 Signal Timing Specification
- 7.0 Signal Timing waveforms of interface signal (DE mode)
- 8.0 Input Si gnals, Display Colors & Gray Scale of Colors
- 9.0 Power Sequence
- 10.0 Mechanical Characteristics
- 11.0 Mechanical Drawing
- 12.0 Reliability Test
- 13.0 Handling & Cautions
- 14.0 Environment & Safety
- 15.0 Packing Information
THIS SPECIFICATION IS THE PROPERTY OF BOE HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HYDIS AND MUST BE RETURNED TO BOE HYDIS UPON ITS REQUEST TITLE : HV089WX1-100TITLE : HV089WX1 100 Product Specification for Customer Rev. O BOE HYDIS TECHNOLOGYBOE HYDIS TECHNOLOGY B2005-C001-B (1/3) A4(210 X 297) SPEC. NUMBER PRODUCT GROUP TFT-LCD REV. O ISSUE DATE 2008.2. 11 PAGE A4(210 X 297) SPEC. NUMBER PAGE 1O F 27 FOR MORE INFORMATION: AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA, 92656
Http://www.AZDISPLAYS.com
PRODUCT GROUP REV ISSUE DATE TFT-LCD PRODUCT 2008.2.11O REV. ECN NO. DESCRIPTION OF CHANGES DATE PREPARED O Initial Release 2008.02.11 Joseph Ha
REVISION HISTORY
B2005-C001-B (2/3) A4(210 X 297) SPEC. NUMBER SPEC. TITLE HV089WX1-100 Product Specification for Customer PAGE 2O F 2 7
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
1.0 GENERAL DESCRIPTION
1.1 Introduction
HV089WX1-100 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 8.9 inch diagonally measured active area with WXGA resolutions (1280 horizontal by 768 vertical pixel array) Each pixel is divided into RED GREEN BLUE dots which arevertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is a low reflection and higher color type. Source Driver LCDS Rx LVDS Input Si l BACK LIGHT (Fluorescent Lamp) Gate Driver TFT LCD Panel
1280 X 768
Connector (C Signal VDD CN2 Vcom CN Back Light (SMD LED Array) HVDD VDIM z Thin and light weight z 3.3 V power supply z Low driving voltage and low power consumption z 1 Channel LVDS Interface
1.2 Features
z 1 Channel LVDS Interface z SMD LED (36EA) Array (Top Side/Horizontal Direction) z 262,144 colors z Data enable signal mode z Front Mounting Frame z RoHS Product z No EDID and No LED driver B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 4O F 2 7 SPEC. NUMBER z No EDID and No LED driver
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
1.3 Application
1.4 General Specifications
Parameter Specification Unit Remarks Active area 193.92 (H) ×116.35 (V) mm Number of pixels 1280 (H) ×768 (V) pixels Pixel pitch 0.1515 (H) ×0.1515 (V) mm <Table 1. General Specifications> Pixel pitch 0.1515 (H) 0.1515 (V) mm Pixel arrangement RGB Vertical stripe Display colors 262,144 colors Display mode Normally Black Dimensional Luminance of White 300 (Typ.) Cd/m² At Center Weight 130(Typ.) ± 5 (Min. / Max.) g Back-light SMD LED (36EA) Array Note 1: at PCB side B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 5O F 2 7 SPEC. NUMBER
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11 2.0 ABSOLUTE MAXIMUM RATINGS2.0 ABSOLUTE MAXIMUM RATINGS The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. Parameter Symbol Min. Max. Unit Remarks Li P S l V l V 03 40 V Ta=25+/-2°C Logic Power Supply Voltage VDD -0.3 4.0 V Logic Power Supply Voltage V IN -0.3 V DD+0.3 V Back-light Power Supply Voltage HV DD -0.3 40 V Back-light LED Current 25℃ ILED -3 0 m A N o t e 1 50℃ I 20 mA50℃ ILED - 20 mA Back-light LED Reverse Voltage VR -5 V Operating Temperature T OP 0+ 5 0 ℃ Note 1, 2 Storage Temperature T SP -20 +60 ℃ Note 1 Ambient temperature vs allowable forward current are shown in the figure belowNote 1. Ambient temperature vs allowable forward current are shown in the figure below. Note 2. Temperature and relative humidity range are shown in the figure below. 90% RH Max. ( 40 ℃ ≥ Ta) Maximum wet - bulb temperature at 39 ℃ or less. ( > 40℃) No condensation. 100 Relative Humudity Operating Range (40, 90) (50, 50) 100 (50,20) Ambient Temperature vs Maximum Forward Current pg g Storage Range (50, 50) (60, 27) B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 6O F 2 7 SPEC. NUMBER -40 -20 0 20 40 60 80 Temperature (℃)
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11 3.0 ELECTRICAL SPECIFICATIONS3.0 ELECTRICAL SPECIFICATIONS
3.1 Electrical Specifications
< Table 3. Electrical Specifications > Parameter Min. Typ. Max. Unit Remarks Logic Power Supply Voltage V DD 3.0 3.3 3.6 V Note 1 Logic Power Supply Current I - 330 500 mA Note 1Logic Power Supply Current IDD - 330 500 mA Note 1 Back-light Anode Supply Voltage Vanode - 19.2 25.8 V Note 2 Back-light Cathode Supply Voltage Vcathode -0 4 . 8 V Note 2 Back-light PWM Frequency FPWM 100 - 500 ㎐gq y PWM High Level Differential Input Signal Voltage VIH - - +100 mV VCM = +1.2V Low Level Differential Input Signal Voltage VIL -100 - - mV Back-light LED Voltage / Back-light LED Total Voltage VLED 2.7/ 16 2 3.2/ 19 2 3.5/ 21 0 VBack-light LED Total Voltage /VBL 16.2 19.2 21.0 Back-light LED Current / Back-light LED Total Current ILED /IBL 15.2/ 91.2 16/ 16.8/ 100.8 mA Life Time 12,000 -- H r s Based on LED Power Consumption PD - 1.09 1.65 W Note 1 P 18 4 21 2 W Note 2 3 Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for 3.3V at 25℃. ) d Power Consumption PLED - 1.84 2.12 W Note 2, 3 Ptotal -2 . 8 4 3 . 7 7 W Note 1, 2, 3 Power Consumption (EBL) P EBL - 1.46 1.51 W Note 1, 2, 3 a) Typ : Window XP pattern b) Max : Vertical Sub line pattern c) EBL : Mosaic pattern (32 x 32) 2. The power supply voltage and current is measured and specified at the interface connector of LCM including LED Driver. 3. Reference value, which is measured with LED Driver for 12V. 4. Reference value, which is measured without LED Driver. B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 7O F 2 7 SPEC. NUMBER 4. Reference value, which is measured without LED Driver. 5. Calculated value for reference (VLED × ILED × # of LEDs (36EA) ).
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
4.0 OPTICAL SPECIFICATION
4.1 Overview
The test of Optical specifications shall be measured in a dark room (ambient luminance ≤ 1 lux and temperature = 25±2℃) with the equipment of Luminance meter system (Goniometer system and TOPCONE BM-5) and test unit shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of θ and Φ equal to 0°. We refer to θØ=0 (=θ3 ) as the 3 o’clock direction (the “right”), θØ=90 (= θ12 ) as the 12 o’clock direction (“upward”), θØ=180 (= θ9 ) as the 9 o’clock direction (“left”) and θØ=270(= θ6 ) as the 6 o’clock direction (“bottom”). While scanning θand/or Ø, the center of the measuringØ 270 6 spot on the Displa y surface shall sta y fixed. The backli ght should be operatin g for 30 minutes prio r to
4.2 Optical Specifications
<Table 4. Optical Specifications> Parameter Symbol Condition Min. Typ. Max. Unit Remark Viewing Angle range Horizontal CR > 10 85 89 90 Deg. Θ9 85 89 90 Deg. Note 1 Vertical Θ12 85 89 90 Deg. Θ6 85 89 90 Deg. Luminance Contrast ratio CR Θ = 0° 450 500 - Note 2 Luminance of White 1 Point Y w Θ = 0° 270 300 - cd/m 2 White Luminance uniformity
5 Points ΔY5 80 85 -
%N o t e 3
13 Points ΔY13 60 70 -
x 0.260 0.300 0.340 Note 4 White Chromaticity xw Θ = 0° 0.260 0.300 0.340 Note 4 yw 0.280 0.320 0.360 Reproduction Of color Red x R Θ = 0° 0.523 0.563 0.603 yR 0.314 0.354 0.394 Green x G 0.291 0.331 0.371 y 0 502 0 542 0 582Of color yG 0.502 0.542 0.582 Blue x B 0.106 0.146 0.186 yB 0.077 0.117 0.157 Response Rise T r Ta= 25° C Θ = 0° -2 8-m s N o t e 5 Time Decay T d B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 8O F 2 7 SPEC. NUMBER Cross Talk C T Θ = 0° -- 2 . 0 % N o t e 6
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11 Note : 1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to the LCD surface. ( see FIGURE 1 shown in Appendix )( see FIGURE 1 shown in Appendix ) 2. Contrast measurements shall be made at viewing angle of Θ=0 ° and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state. (S ee FIGURE 1 shown in Appendix) Luminance Contrast Ratio (CR) is defined mathematically. CR Luminance when displaying a white raster 3. The White luminance uniformity on LCD surface is then expressed as : ΔY = Maximum Luminance of 5(or 13) points / Minimum Luminance of 5(or 13) points. ( see FIGURE 2 shown in Appendix )
4 The color chromaticity coordinates specified in Table 4 shall be calculated from the
CR = Luminance when displaying a black raster 4. The color chromaticity coordinates specified in Table 4 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements s h a l lb em a d ea tt h ec e n t e ro ft h ep a n e l . 5. The electro-optical response time meas urements shall be made as FIGURE 3 shown in Appendix by switching the “data” input signal OFF and ON. The times needed for the luminance to change from 10% to 90% is Tr, and 90% to 10% is Td. 6. Cross-Talk of one area of the LCD surface by another shall be measured by comparing h li (Y ) f 25 di ih ll di l il llthe luminance (YA) of a 25mm diameter area, with all display pixelss e tt oag r a ylevel,t o the luminance (YB) of that same area when any adjacent area is driven dark. ( see FIGURE 4 shown in Appendix ) B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 9O F 2 7 SPEC. NUMBER
4.3 Optical Measurements
Figure 1. Measurement Set Up Figure 2. White Luminance and Uniformity Measurement Locations (5 points) Luminance of white is defined as luminance values of 5 points across the LCD surface.
Figure 5. Cross Modulation Test Description
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11 5.0 INTERFACE CONNECTION.
5.1 Electrical Interface Connection
<Table 5. Pin Assignments for the Interface Connector> CN1 Interface connector I-PX / 20347-030E-02 or equivalent CN2 FPC connector I-PEX / 20397-008E or equivalent Pin No Symbol Function Remark 1 VDD1 Power Supply: +3.3V 2 VDD2 Power Supply: +3.3V 3 VDD3 Power Supply: +3.3V 4 VDD4 Power Supply: +3.3V
5 NC Reserved
6 VSS Ground
7 VSS Ground
8 VSS Ground
9 VSS Ground
10 RIN0- LVDS Negative data signal (-) Tx pin # 48
11 RIN
0+L V D S Positive data signal (+) Tx pin # 470 So s te d a t a s g a () p
12 VSS Ground
13 RIN1- LVDS Negative data signal (-) Tx pin # 46
14 RIN1+ LVDS Positive data signal (+) Tx pin # 45
15 VSS Ground
16 RIN2- LVDS Negative data signal (-) Tx pin # 42
17 RIN2+ LVDS Positive data signal (+) Tx pin # 4117 RIN2+ LVDS Positive data signal (+) Tx pin # 41
18 VSS Ground
19 RCLKIN- LVDS Negative clock signal (-) Tx pin # 40
20 RCLKIN+ LVDS Positive clock signal (+) Tx pin # 39
21 VSS Ground
22 NC Reserved
23 VCD1 LED Power Cathode23 VCD1 LED Power Cathode
24 VCD2 LED Power Cathode
25 VCD3 LED Power Cathode
26 VCD4 LED Power Cathode
27 VCD5 LED Power Cathode
28 VCD6 LED Power Cathode
29 NC Reserved
B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 13 OF 27 SPEC. NUMBER
30 VAD LED Power Anode
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11 5.2. LVDS Interface LVDS Transmitter: THC63LVDM83A or equivalent. Input signal Transmitter Interface DF19KR-20P-1H Remark Pin No Pin No System (Tx) TFT-LCD (Rx) Pin No. R0 51 OUT0- OUT0+ IN0- IN0+ R1 52 R2 54 R3 55 R4 56 R5 3 G0 4 G1 6 G2 7 OUT1- OUT1+ IN1- IN1+ G3 11 G4 12 G5 14 B0 15 B1 1 99 B2 20 OUT2- OUT2+ IN2- IN2+ B3 22 B4 23 B5 24 HSYNC 27 VSYNC 28 DE 30 MCLK 31 40 CLKOUT- CLKIN- 19
39 CLKOUT+ CLKIN+ 20
B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 14 OF 27 SPEC. NUMBER
39 CLKOUT CLKIN 20
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
5.3 Back-light Interfaceg
Pin No. Symbol Function Remark
1 Anode1 LED Anode Power Supply
LED Anode Power Supply2 Anode2 LED Anode Power Supply CN2 LED FPC Connector (20397-008E, Manufactured by I-PEX ) pp y (3.2V X 6 EA = 19.2V)3 Anode3 LED Anode Power Supply
4 Anode4 LED Anode Power Supply
5 NC Non-Connection
6 Cathode1 LED Cathode Power Supply
7 Cathode2 LED Cathode Power Supply
8 Cathode3 LED Cathode Power Supply
9 Cathode4 LED Cathode Power Supply
5.4. Data Input Format RGBRGB RGBRGB
1 Pixel = 3 Dots
Display position of input data (1,768) (2,768) B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 15 OF 27 SPEC. NUMBER Display position of input data
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11 6 0 SIGNAL TIMING SPECIFICATIONS6.0. SIGNAL TIMING SPECIFICATIONS
6.1 HV089WX1-100 is operated by the only DE (Data enable) mode
(LVDS Transmitter Input) Item Symbols Min Typ Max Unit Frame Period T1 804 823 linesFrame Period T1 804 823 - lines Vertical Display Period T2 - 768 - lines One Line Scanning Period T3 1350 1440 - clocks Horizontal Display Period T4 - 1280 - clocks Clock Frequency 1/T5 - 71.11 - MHz
7.0 SIGNAL TIMING WAVEFORMS
71T i m i n gW a v e f o r m sof Interface Signal7.1 Timing Waveforms of Interface Signal DE DE DCLK Valid display data (1280 Clocks) T4T5 DE DATA SIGNALS B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 16 OF 27 SPEC. NUMBER
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
7.2 LVDS Rx Interface Timing Parameter
The specification of the LVDS Rx interface timing parameter < LVDS Rx Interface Timing Specification> Item Symbol Min. Typ. Max. Unit Remarks CLKIN P i d tRCIP 12 50 14 43 25 00CLKIN Period tRCIP 12.50 14.43 25.00 nsec Input Data 0 tRIP0 -0.4 0.0 +0.4 nsec Input Data 1 tRIP1 tRICP/7-0.4 tRICP/7 tRICP/7+0.4 nsec Input Data 2 tRIP2 2 ×tRICP/7-0.4 2 ×tRICP/7 2 ×tRICP/7+0.4 nsec Input Data 3 tRIP3 3 ×tRICP/7 04 3 ×tRICP/7 3 ×tRICP/7+0 4 nsecInput Data 3 tRIP3 3 ×tRICP/7-0.4 3 ×tRICP/7 3 ×tRICP/7+0.4 nsec Input Data 4 tRIP4 4 ×tRICP/7-0.4 4 ×tRICP/7 4 ×tRICP/7+0.4 nsec Input Data 5 tRIP5 5 ×tRICP/7-0.4 5 ×tRICP/7 5 ×tRICP/7+0.4 nsec Input Data 6 tRIP6 6 ×tRICP/7-0.4 6 ×tRICP/7 6 ×tRICP/7+0.4 nsec tRIP5 tRIP4 tRIP6 tRIP3 tRIP2 tRIP1 tRIP0 Rx Rx Rx Rx Rx Rx Rx Rx Rx RxRx tRCIP Vdiff=0[v]Vdiff=0[v]RxCLKIN+/- RxINz +/- *Z=0 ,1 ,2 B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 17 OF 27 SPEC. NUMBER
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
8.0 INPUT SIGNALS, BASIC DISPLAY COLORS & GRAY SCALE OF COLORS
Colors & Gray Scale Red Data Green Data Blue Data R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black 0 0 00000 00000000000 Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Each color is displayed in sixty-four gray scales from a 6 bit data signal input. A total of 262,144 colors are derived from the resultant 18 bit data. Basic Colors Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Green 0 0 00001 11111000000 Cyan 0 0 00001 11111111111 Red 1 1 11110 00000000000 Magenta 1 1 11110 00000111111 Yellow 1 1 11111 11111000000 White 1 1 11111 11111111111 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Gray Scale Of Red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 00010 00000000000 Darker 0 0 00100 00000000000 △ ↓↓ ↓ ▽ ↓↓ ↓ Brighter 1 1 11010 00000000000 ▽ 1 1 11100 00000000000 Red 1 1 11110 00000000000 Gray Scale Of Green Black 0 0 00000 00000000000 △ 0 0 00000 00001000000 Darker 0 0 00000 00010000000 △ ↓↓ ↓ ▽ ↓↓ ↓ Brighter 0 0 00001 11101000000 ▽ 0 0 00001 11110000000 G 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Gray Scale Of Blue Black 0 0 00000 00000000000 △ 0 0 00000 00000000001 Darker 0 0 00000 00000000010 △ ↓↓ ↓ ▽ ↓↓ ↓ Brighter 0 0 00000 00000111101 ▽ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0▽ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 Blue 0 0 00000 00000111111 Gray Scale Of White Black Black 0 0 00000 00000000000 △ 0 0 00010 00001000001 Darker 0 0 00100 00010000010 △ ↓↓ ↓ ▽ ↓↓ ↓ Brighter 1 1 11011 11101111101 B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 18 OF 27 SPEC. NUMBER Black ▽ 1 1 11101 11110111110 White 1 1 11111 11111111111
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
9.0 POWER SEQUENCEQ
To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below 0 9VDD Power Supply 0.9VDD 0.1VDD 0.9VDD 0.1VDD Interface Signal Valid T3 T4 Back- light 0V z 0 < T1 ≤ 10 ms z 0 < T2 ≤ 50 ms z 200 ms ≤ T3 z 200 ms ≤ T4 z 0 ≤ T5 ≤ 50ms z 0 ≤ T6 ≤ 10ms z 150ms ≤ T7 Notes: 1. When the power supply VDD is 0V, Keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. 3. Back Light must be turn on after power for logic and interface signal are valid. B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 19 OF 27 SPEC. NUMBER gp g g
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
10.0 MECHANICAL CHARACTERISTICS
10.1 Dimensional Requirements
FIGURE 5, 6 shown in appendix shows mechanical outlines for the model. Parameter Specification Unit Active area 193.92 (H) ×116.35 (V) mm Number of pixels 1280(H) ×768(V) pixels (1 pixel = R + G + B dots) Pixel pitch 0.1515(H) ×0.1515(V) mm Pixel arrangement RGB Vertical stripePixel arrangement RGB Vertical stripe Display colors 262,144 colors Display mode Normally Black Weight 130 (Typ.) g
10.2 Mounting
See FIGURE 5. (shown in Appendix) Back-light SMD LED (36ea) Array 10.3 Glare and Polarizer Hardness. The surface of the LCD has an glare coating and a coating to reduce scratching.
10.4 Light Leakage
There shall not be visible light from the back-lighting system around the edges of the screen as seen from a distance 50 cm from the screen with an overhead light level of 150lux. The manufacture shall furnish limit samples of the panel showing the light leakage acceptable. B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 20 OF 27 SPEC. NUMBER
11.0 Mechanical Drawing
Figure 6. TFT-LCD Module Outline Dimension (Front View)
Figure 7. TFT-LCD Module Outline Dimensions (Rear view)Figure 7. TFT LCD Module Outline Dimensions (Rear view)
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
12.0 RELIABLITY TEST
The Reliability test items and its conditions are shown in below. No Test Items Conditions
1 High temperature storage test Ta = 60 °C, 240 hrs
<Table 12. Reliability Test>
1 High temperature storage test Ta 60 C, 240 hrs
2 Low temperature storage test Ta = -20 °C, 240 hrs
3 High temperature & high humidity
operation test Ta = 50 ℃, 80%RH, 240hrs
4 High temperature operation test Ta = 50 °C, 240 hrs
5 Low temperature operation test Ta = 0 °C, 240 hrs
6T h e r m a l s h o c k Ta = -20 °C ↔ 60 °C (30 min), 100 cycle
7 Vibration test
(non-operating) Frequency : 10~500Hz Gravity/AMP : 1.5G Period : X,Y,Z 30min
8 Shock test
(non-operating) Gravity : 220G Pulse width : 2ms, half sine wave ±X, ±Y, ±Z Once for each direction
9 Electro-Static Discharge Test
(non operating) Air : 150pF, 330ohm, 15KV Contact : 150pF 330ohm 8KV(non-operating) Contact : 150pF, 330ohm, 8KV B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 23 OF 27 SPEC. NUMBER
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
13.0 HANDLING & CAUTIONS
13.1 Cautions when taking out the module
y Pick the pouch only, when taking out module from a shipping package.
13.2 Cautions for handling the module
y As the electrostatic discharges may break the LCD module handle the LCD moduley As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible. y As the LCD panel and backlight element are made from fragile glass material, impulse and pressure to the LCD module should be avoided. y As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. y Do not pull the interface connector in or out while the LCD module is operating.Do not pull the interface connector in or out while the LCD module is operating. y Put the module display side down on a flat horizontal plane. y Handle connectors and cables with care.
13.3 Cautions for the operation
y When the module is operating, do not lose MCLK, DE signals. If any one of these signals were lost, the LCD panel would be damaged. y Obey the supply voltage sequence. If wrong sequence were applied, the module would be damaged.
13.4 Cautions for the atmosphere
y Dewdrop atmosphere should be avoided. y Do not store and/or operate the LCD module in a high temperature and/or humidity th S t i l t dt i l ki h d datmosphere. Storage in an electro-conductive polymer-packing pouch and under relatively low temperature atmosphere is recommended.
13.5 Cautions for the module characteristics
y Do not apply fixed pattern data signal to the LCD module at product aging. y Applying fixed pattern for a long time may cause image sticking.
13.6 Other cautions
y Do not disassemble and/or re-assemble LCD module. y Do not re-adjust variable resistor or switch etc. y When returning the module for repair or etc, please pack the module not to be broken. We recommend using the original shipping packages. B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 24 OF 27 SPEC. NUMBER
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
14.0 Environment & Safety
14.1 Packing Label
Label Size: 108 mm (L) × 56 mm (W)
Contents
Model: HV089WX1-100 Q\ty: Module Q\ty in one box Serial No.: Box Serial No. See next figure for detail description. Date: Packing Date FG Code: FG Code of Product * 0000000000000 * 200X.X.XX XXHV089WX1-100 00 0 00 0 0 000000 XXXX 00 0 00 0 0 000000 Type Grade Year Month ITEM-CODE Serial_no FG CODE RoHS Mark B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 25 OF 27 SPEC. NUMBER
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11 14.3 Product Label14.3 Product Label BOE HYDIS Barcode 1 2 3 4 5 6 No 1. Control Number No 5. Month (1, 2, 3,…, 9, X, Y, Z) XXXXXXXXXXXXXXX No 2. Rank / Grade No 3. Line Classification (BOE HYDIS : H, LCM : L, BOE OT : A/B/C) No 6. Product name No 7. Serial Number No 4. Year (7 : 2007, 8 : 2008, … )No 4. Year (7 : 2007, 8 : 2008, … ) B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 26 OF 27 SPEC. NUMBER
REV ISSUE DATEPRODUCT GROUP OTFT-LCD PRODUCT 2008. 2.11
15.0 PACKING INFORMATION
15.1 Packing Order
box.Put Pad into the box. After sealing the box, attach Packing Label attach Packing Label on the attach position sign area of the box. Place a cover on the top of the box. f As shown in the figure, place the Modules bundled by shielding bag in the box. Notes y Box Dimension : 261mm(W) X 349mm(D) X 311mm(H) Pk Q t i t i B 2 0 B2005-C001-B (3/3) A4(210 X 297) PAGESPEC. TITLE HV089WX1-100 Product Specification for Customer 27 OF 27 SPEC. NUMBER y Package Quantity in one Box : 20pcs