HV070WX2-1E0 AZDISPLAYS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 32
Technical content
PRODUCT GROUP REV. ISSUE DATE PAGE TITLE : HV070WX2 - 1E0 Product Speci/f_icat ion A4(210 X 297) PAGE HYDIS Technologies OF 32 2012. 05.08 0 TFT LCD PR OPR IE TAR Y NOTE THIS SPECIFICATION IS THE PROPERTY OF HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF HYDIS AND MUST BE RETURNED TO HYDIS UPON ITS REQUEST SPEC. NUMBER S864 - 1472 1 FOR MORE INFORMATION: AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA 92656
PHONE: (949) 360 5830 E-MAIL: sales@azdisplays.com Website: www.azdisplays.com
REVISION HISTORY
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE REV. ECN NO. DESCRIPTION OF CHANGES DATE PREPARED 0 Initial Release 2012.05.08 S.H.PARK OF 32 2
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 3
Contents
1.0 General Description 4
2.0 Absolute Maximum Ratings 6
3.0 Electrical Specifications 7
4.0 Optical Specifications 9
5.0 Interface Connections 14
6.0 Signal Timing Specifications 17
7.0 Signal Timing Waveforms 18
8.0 Input Signals, Basic Display Colors & Gray Scale of Colors 20
9.0 Power Sequence 21
10.0 Mechanical Characteristics 22
11.0 Mechanical Drawing 23
12.0 Reliability Test 26
13.0 Handling & Cautions 27
14.0 Labels 28
15.0 Packing Information 31
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
1.0 GENERAL DESCRIPTION
1.1 Introduction
HV070WX2-1E0 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 7.0 inch diagonally measured active area with WXGA resolutions (800 horizontal by 1280 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical Stripe and this module can display 262K colors. The TFT-LCD panel used for this module is a low reflection and higher color type.
1.2 Features
Thin and Light Weight 3.3 V Logic Power LVDS Interface (DE mode only) SMD LED (25EA) Array (Right Side/Vertical Direction) 262K Colors (6bit) Green Product (RoHS) & Halogen free Gate Driver Source Driver TFT LCD Panel 800×RGB X 1280 LVDS Input Signal VDD Back Light (SMD LED Array) VLED/PWM Connector DC/DC Gamma VCOM
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
1.4 General Specifications
1.3 Application
Tablet, etc < Table 1. General Specifications > Note 1. LCM thickness with component height: 4.05mm max Parameter Specification Unit Remark Active area 94.20 (H) x 150.72 (V) mm Number of pixels 800RGB(H) ×1280(V) pixels Pixel pitch 0.11775 × 0.11775 mm Pixel arrangement RGB Vertical Stripe Display colors 262K (6bit) colors Gamut Min. 45.0% / Typ. 50.0% Display mode Normally Black Outline dimension 104.32X161.67x 2.3 (D) typ. mm Note 1 Weight Typ. 82g / Max. 86g g Back-light Right edge side, 25-LEDs type
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 Operating Range Storage Range -40 -20 0 20 40 60 80 Temperature (℃) (40, 90) (50, 50) (60, 27) 100 Relative Humudity (70, 20)
2.0 ABSOLUTE MAXIMUM RATINGS
The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. Note 1. Ambient temperature vs allowable forward current are shown in the figure below. Note 2. Temperature and relative humidity range are shown in the figure below. 90% RH Max. ( 40℃ ≥ Ta) Maximum wet - bulb temperature at 39℃ or less. ( > 40℃) No condensation. Ta=25+/-2°C < Table 2. Absolute Maximum Ratings > Parameter Symbol Min. Max. Unit Remarks Logic Power Supply Voltage VDD -0.3 4.0 V Logic Power Supply Voltage VCC -0.3 2.0 V Back-light Power Supply Voltage VLEDIN -0.3 6.0 V Back-light LED Current ILED - 30 mA Note 1 Back-light LED Reverse Voltage VR - 5 V Operating Temperature TOP -20 +60 ℃ Note 1, Note 2 Storage Temperature TSP -30 +70 ℃
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 7
3.0 ELECTRICAL SPECIFICATIONS
3.1 Electrical Specifications
< Table 3. Electrical Specifications > Parameter Min. Typ. Max. Unit Remarks Logic Power Supply Voltage VDD 3.0 3.3 3.6 V Logic Power Supply Current IDD - 106 121 mA VDD=3.3V, 25℃ Mosaic 5X5 pattern Note 1 LED Driver Power Supply Voltage VLEDIN 3 3.7 5 V Note 1 LED Driver Power Supply Current ILEDIN - 446 - mA VLEDIN=3.7V, 25℃ Note 2 LED Driver’s Efficiency η - 85 - % Back-light LED Voltage / Back-light LED Total Voltage VLED /VBL 2.75/ 13.75 2.85/ 14.25 3.05/ 15.25 V Back-light LED Current / Back-light LED Total Current ILED /IBL - 19 /95 - mA Power Consumption PDD - 0.35 0.4 W VDD=3.3V, 25℃ Mosaic 5X5 pattern VLEDIN=3.7V Note 1, 2 PLED - 1.65 1.7 W Ptotal - 2.0 2.1 W Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. (Pattern : Mosaic 5X5) 2. Reference value, which is measured with LED Driver for VLEDIN=3.70V
3.2 LED PWM Specifications
Parameter Min. Typ. Max. Unit Remarks LED_EN Logic High Level VADJH 1.8 3.3 3.6 V LED_EN Logic Low Level VADJL 0 0 0.4 V Dimming Frequency FADJ 0.1 20 200 KHz - Refer to LED Driver IC data sheet (AT 1316C, GMT), - Needs to apply to more than 20KHz to reduce acoustic noise. Dimming Duty Cycle D 5 - 100 % -. PWM dimming Frequency : 0.1KHz to 100KHz. < Table 4. Electrical Specifications >
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 8
3.3 PWM Duty Ratio vs Brightness
0 10 20 30 40 50 60 70 80 90 100 Duty Ratio (%) Relative Brightness (%) Notes : In case of duty ratio 0%, LED can’t illuminate itself so this state is LED off. In case of duty ratio 100%, the brightness of LED is maximum and the state is LED on.
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
4.0 OPTICAL SPECIFICATIONS
4.1 Overview
The test of optical specifications shall be measured in a dark room (ambient luminance 1 lux and temperature = 252℃) with the equipment of Luminance meter system (Goniometer system and TOPCON BM-5A) and test unit shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of θ and Φ equal to 0. We refer to θØ =0 (=θ3 ) as the 3 o’clock direction (the “right”), θØ =90 (= θ12 ) as the 12 o’clock direction (“upward”), θØ =180 (= θ9 ) as the 9 o’clock direction (“left”) and θØ =270(= θ6 ) as the 6 o’clock direction (“bottom”). While scanning θ and/or Ø, the center of the measuring spot on the Display surface shall stay fixed. VCC shall be 3.3+/- 0.3V at 25C. Parameter- Symbol Condition Min. Typ. Max. Unit Remarks Viewing Angle range Horizontal Θ3 CR > 10 80 89 - Deg. Note 1 Θ9 80 89 - Deg. Vertical Θ12 80 89 - Deg. Θ6 80 89 - Deg. Luminance Contrast ratio CR Θ = 0 600 700 - Note 2 Luminance of White 1 Points Yw Θ = 0 390 450 - cd/m2 Note 5 White Luminance uniformity
9 Points ΔY9 72 80 - % Note 6
Θ = 0 0.280 0.310 0.340 Note 3 Note 4 Wy 0.300 0.330 0.360 Reproduction of color Red Rx Θ = 0 0.618 0.648 0.678 Ry 0.305 0.335 0.365 Green Gx 0.301 0.331 0.361 Gy 0.506 0.536 0.566 Blue Bx 0.122 0.152 0.182 By 0.038 0.068 0.098 Response Time Total (Tr + Td) Ta= 25 C Θ = 0 - 30 - Ms Note 7 Cross Talk CT Θ = 0 - - 2.0 % Note 8
4.2 Optical Specifications
<Table 5. Optical Specifications>
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 10 Notes : 1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing angles are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to the LCD surface (see Figure1). 2. Contrast measurements shall be made at viewing angle of Θ= 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state (see Figure1). Luminance Contrast Ratio (CR) is defined mathematically as CR = Luminance when displaying a white raster / Luminance when displaying a black raster. 3. Reference only / Standard Front Surface Treatment Measured with green cover glass. The color chromaticity coordinates specified in Table 4 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel. 4. Real color coordinates might be changeable after measurement or detail tuning. 5. The luminance value of Typ. 450cd/m2 means the brightness of PWM is 100%.
Figure 1. Measurement Set Up Figure 2. Uniformity Measurement Locations (9 points)
4.3 Optical Measurements
Figure 3. Response Time Testing
Figure 4. Cross Modulation Test Description to change from 10% to 90% is Tr, and 90% to 10% is Td. driven dark (Refer to Figure 4).
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
5.0 INTERFACE CONNECTIONS
5.1 Electrical Interface Connection
<Table 6, Electrical Interface Connection > No. Symbol Remark No. Symbol Remark 1 VDD Power Supply, 3.3V typ 17 GND Ground 2 VDD Power Supply, 3.3V typ 18 RXINO3- N.C (floating) 3 VDD Power Supply, 3.3V typ 19 RXINO3+ N.C (floating) 4 NC N.C (floating) 20 GND Ground
5 GND Ground 21 LVBIT Ground
6 RXINO- D0- 22 DITHER Ground
7 RXINO+ D0+ 23 GND Ground
8 GND Ground 24 LED EN (PWM) PWM
9 RXINO1- D1- 25 LVFMT Ground
10 RXINO1+ D1+ 26 BIST N.C (floating)
11 GND Ground 27 VLED LED Power Supply , 3~5V
12 RXINO2- D2- 28 VLED LED Power Supply , 3~5V
13 RXINO2+ D2+ 29 VLED LED Power Supply , 3~5V
14 GND Ground 30 VLED LED Power Supply , 3~5V
15 RXCLKIN- CLK- 31 NC N.C (floating)
16 RXCLKIN+ CLK+
CN1 HYDIS side connector FF12-31A-R11B, Manufactured by DDK Note 1. Yellow boxes in pin map table are using for 8bit input. LVBIT (8/6 bit change), DITHER (FRC en/disable), LVFMT (MSB/LSB change) FPC Rear view
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 15
5.2 LVDS Interface
LVDS Transmitter : THC63LVDM83A Input signal Transmitter Interface FF12-31A-R11B Remark Pin No Pin No System (Tx) TFT-LCD (Rx) Pin No. R0 51 OUT0- OUT0+ D0-IN-N D0-IN-P R1 52 R2 54 R3 55 R4 56 R5 3 G0 4 G1 6 OUT1- OUT1+ D1-IN-N D1-IN-P G2 7 G3 11 G4 12 G5 14 B0 15 B1 19 B2 20 OUT2- OUT2+ D2-IN-N D2-IN-P B3 22 B4 23 B5 24 HSYNC 27 VSYNC 28 DE 30 R6 50 OUT3- OUT3+ D3-IN-N D3-IN-P R7 2 G6 8 G7 10 B6 16 B7 18 Reserved 25 MCLK 31 40 CLKOUT- CLK-IN-N 15
39 CLKOUT+ CLK-IN-P 16
<Table 7, LVDS Interface >
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
5.4 Data Input Format
1 Pixel = 3 Dots
5.3 LVDS Format
DE VS HS B5 B4 B3 B2 DE R2 B1 B0 G5 G4 G3 G2 G1 B1 G1 G0 R5 R4 R3 R2 R1 R0 G0 R0 CLKP CLKN D0P/N D1P/N D2P/N
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 6.0. SIGNAL TIMING SPECIFICATIONS
6.1 The HV070WX2-1E0 LCM is operated by the only DE (Data enable) mode
Item Symbol Min. Typ. Max. Unit Remark Frame Period T1 1285 1288 1510 Lines Vertical Display Period T2 - 1280 - Lines One line Scanning Period T3 860 864 1344 Clocks Horizontal Display Period T4 - 800 - Clocks Clock Frequency 1/T5 30 66.8 85 MHz Note 1 < Table 8, Signal Timing > Note 1. This value only guarantee for the circuit-operation (NO guarantee of display quality) Contents Symbol Condition Typical Unit HS cycle HP HDISP+HBLK 864 PCLK HS low Pulse width HS 16 PCLK Horizontal back porch HBP 32 PCLK Horizontal front porch HFP 16 PCLK Horizontal data start point HS+HBP 48 PCLK Horizontal blanking period HBLK HS+HBP+HFP 64 PCLK Horizontal active area HDISP 800 PCLK Vertical cycle VP VDISP+VBLK 1288 Line Vertical low Pulse width VS 1 Line Vertical back porch VBP 2 Line Vertical front porch VFP 5 Line Vertical data start point VS+VBP 3 Line Vertical blanking period VBLK VS+VBP+VFP 8 Line Vertical active area VDISP 1280 Line Verical Refresh rate VRR 60 Hz Pixel clock requency PCLK 66.8 MHz
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
7.0 SIGNAL TIMING WAVEFORMS
7.1 Timing Waveforms of Interface Signal
Valid display data (800 Clocks) DE DCLK DE DATA SIGNALS
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
7.2 LVDS Rx Interface Timing Parameter
The specification of the LVDS Rx interface timing parameter < Table 9, LVDS Rx Interface Timing Specification> tRIP5 tRIP4 tRIP3 tRIP2 tRIP6 tRIP1 tRIP0 Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx tRCIP Vdiff=0[v] Vdiff=0[v] RxCLKIN+/- RxINz +/- * Z = 0, 1, 2 Item Symbol Min. Typ. Max. Unit Remarks CLKIN Period tRCIP - 14.97 - nsec Input Data 0 tRIP0 -0.4 0.0 +0.4 nsec Input Data 1 tRIP1 tRICP/7-0.4 tRICP/7 tRICP/7+0.4 nsec Input Data 2 tRIP2 2 ×tRICP/7-0.4 2 ×tRICP/7 2 ×tRICP/7+0.4 nsec Input Data 3 tRIP3 3 ×tRICP/7-0.4 3 ×tRICP/7 3 ×tRICP/7+0.4 nsec Input Data 4 tRIP4 4 ×tRICP/7-0.4 4 ×tRICP/7 4 ×tRICP/7+0.4 nsec Input Data 5 tRIP5 5 ×tRICP/7-0.4 5 ×tRICP/7 5 ×tRICP/7+0.4 nsec Input Data 6 tRIP6 6 ×tRICP/7-0.4 6 ×tRICP/7 6 ×tRICP/7+0.4 nsec
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 20
8.0 INPUT SIGNALS, BASIC DISPLAY COLORS & GRAY SCALE OF COLORS
A total of 262K colors are displayed using 64 gray from 6bit input. Colors & Gray Scale Red data Green data Blue data R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Gray Scale Of Red Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Darker 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 △ ↑ ↑ ↑ ▽ ↓ ↓ ↓ Brighter 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ▽ 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Gray Scale Of Green Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Darker 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 △ ↑ ↑ ↑ ▽ ↓ ↓ ↓ Brighter 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 ▽ 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Gray Scale Of Blue Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Darker 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 △ ↑ ↑ ↑ ▽ ↓ ↓ ↓ Brighter 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 ▽ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Gray Scale Of White Black Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 1 Darker 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 1 0 △ ↑ ↑ ↑ ▽ ↓ ↓ ↓ Brighter 1 1 1 1 0 1 1 1 1 1 0 1 1 1 1 1 0 1 ▽ 1 1 1 1 1 0 1 1 1 1 1 0 1 1 1 1 1 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
9.0 POWER SEQUENCE
To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below Power Supply Back- light
- T1 10 ms
- 0 T2 50 ms
- 200 ms T3
- 200 ms T4
- 0 T5 ≤ 50 ms
- 0 T6 10ms
- 150ms T7 Notes : 1. When the power supply VDD/ VCC is 0V, Keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. 3. Back Light must be turn on after power for logic and interface signal are valid. T3 T4 0.9VDD 0.1VDD 0.9VDD 0.1VDD/ Interface Signal Valid
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 22
10.0 MECHANICAL CHARACTERISTICS
10.1 Dimensional Requirements
Figure 5 & 6 (located in 12.0) shows mechanical outlines for the model <Table 10, Mechanical Characters > 10.2 Polarizer Hardness. The surface of the LCD uses Hard coating clear polarizer having over 3H pencil surface hardness test
10.3 Light Leakage
There shall not be visible light from the back-lighting system around the edges of the screen as seen from a distance 50cm from the screen with an overhead light level of 150lux. The manufacture shall furnish limit samples of the panel showing the light leakage acceptable. Parameter Specification Unit Remark Active area 94.20 (H) x 150.72 (V) mm Number of pixels 800RGB(H) ×1280(V) pixels Pixel pitch 0.11775 × 0.11775 um Pixel arrangement RGB Vertical Stripe Display colors 262K (6bit ) colors Gamut Min. 45.0% / Typ. 50.0% Display mode Normally Black Outline dimension 104.32 (H)X161.67(V) X 2.3 (D) typ. mm Note 1 Weight Typ. 82g / Max. 86g g Back-light Right edge side, 25-LEDs type
Figure 6. TFT-LCD Module Outline Dimension (Front View)
11.0 Mechanical Drawing
Figure 7. TFT-LCD Module Outline Dimensions (Rear view)
Figure 8. For Optical Bonding Maker (Reference Rear view)
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
12.0 RELIABLITY TEST
The Reliability test items and its conditions are shown in below. <Table11, Reliability Test> Notes : 1. Shock & ESD test condition is standard of customer system. No Test Item Conditions
1 High temperature storage 80C/240h
2 Low temperature storage -30C/240h
3 High temperature/High humidity
Storage 60C/90%RH/240h
4 High temperature operating 70C/240h
5 Low temperature operating -20C/240h
6 High temperature/High humidity
operating 40C/95%RH/240h
7 Thermal Shock Storage -30℃ (30 min)~ +80 ℃(30 min) , 56 cycles
8 Shock test 980m/s2,Action time: 6ms, Time: 3 times for
each direction, Diretion:+/-X, +/-Y , +/-Z
9 Package Vibration test
Frequency range: 10-55Hz, stroke:1.5mm, swep time: 1 minute, test period: 2 hours for each direction of X, Y , Z 1 time for each direction
11 FPC Bending test Bending degree is 180, bending 30 imes and
the bending radius is 1.0mm
12 FPC Insert/Remove test 30 time FPC insert/remove
13 Low Air Pressure Test
533mbar(100mbar/min ramp), "-40C~55C"(1C/min ramp) and 2hrs per each temperature
14 ESD test Air +/-15KV ,contact +/-8KV , no damage
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32 27
13.0 HANDLING & CAUTIONS
13.1 Cautions when taking out the module
Pick the pouch only, when taking out module from a shipping package.
13.2 Cautions for handling the module
As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible. As the LCD panel and back - light element are made from fragile glass (epoxy) material, impulse and pressure to the LCD module should be avoided. As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. Do not pull the interface connector in or out while the LCD module is operating. Put the module display side down on a flat horizontal plane. Handle connectors and cables with care.
13.3 Cautions for the operation
When the module is operating, do not lose CLK, DE signals. If any one of these signals were lost, the LCD panel would be damaged. Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.
13.4 Cautions for the atmosphere
Dew drop atmosphere should be avoided. Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended.
13.5 Cautions for the module characteristics
Do not apply fixed pattern data signal to the LCD module at product aging. Applying fixed pattern for a long time may cause image sticking.
13.6 Other cautions
Do not re-adjust variable resistor or switch etc. When returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages.
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
14.0 LABELS
14.1 Product Print
Item Description Item Description HYDIS COMPANY NAME E194548 UL CODE HV070XXX-XXX Model name W、ROHS UL CODE、EUROPE RO HS MARK XXX 902 Material code, customer code Made in Taiwan Manufacturing location barcode Manufacturing serial no UL Mark ROHS Mark customer code Explanation is as below 11300001R RHV070XX XXX 1230206 Example 1 1 3 0 0 0 0 1 R code 1 2 3 4 5 6 7 8 9 definition Year Cycle Water code Manufacturer code barcode Manufacturing serial no Example R HV070XX XXX 1 23 0206 code 1~2 3~7 8 9 10 11~12 definition Manufacturer code Model name Material code Year Cycle Water code customer code Explanation is as below
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
14.2 Packing Label (size:80 x 70 mm)
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
14.3 Packing Label
BOX ID Description ： BR089139006A - 902
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
15.0 PACKING INFORMATION
15.1 Packing order
PakingTray stack in a SIO2 bag, accor ding to tray size folded. Each tray must be loaded with 180˚ rotation respectively Notes : 1. Box Dimension: 570mm(L) X 430mm(W) X 220mm(H) 2. Package Quantity in one Box : 108pcs 3. Tray Size : 540mm(L) X 400mm(W) X 0.8mm(H) 1. An carton EPE cushion put into the carton bottom 2. Put tray stack package 3. An carton EPE cushion put on tray stack package
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2012. 05.08 SPEC. NUMBER S864-1472 SPEC TITLE HV070WX2-1E0 Product Specification PAGE OF 32
15.2 Pallet Packing
15.2.1 PALLET specification
(1) 12 box (max.) / 1 pallet (2) Pallet: 1150(L) X 900(W) X 130(H) mm (3) Pallet stack: 1150(L) X 900(W) X920(H) mm (4) Angle boards: L 790 X 50 X 50mm (5) Gross Weight: 162Kg container Angle Boards Polypropylene Band Figure9-2 packing method