HV056WX1-100 AZDISPLAYS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 29
Technical content
B2005-C001-A (1/3) A4(210 X 297) SPEC. NUMBER S864-1338 PRODUCT GROUP REV. ISSUE DATE PAGE TITLE : HV056WX1-100 Preliminary Product Specification Rev. P0 A4(210 X 297) PAGE BOE HYDIS TECHNOLOGY PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HYDIS AND MUST BE RETURNED TO BOE HYDIS UPON ITS REQUEST OF 292008.01.30P0TFT LCD FOR MORE INFORMATION: AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA, 92656
Http://www.AZDISPLAYS.com
B2005-C001-A (2/3) A4(210 X 297)
REVISION HISTORY
PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 REV. ECN NO. DESCRIPTION OF CHANGES DATE PREPARED P0 Initial Release 08.01.30 Y.J. Yoon
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
Contents
1 GENERAL DESCRIPTION 4
1.1 Introduction
1.2 Features
1.3 Applications
1.4 General Specification
2 ABSOLUTE MAXIMUM RATINGS 6
3 OPTICAL SPECIFICATIONS 7
4 ELECTRICAL SPECIFICATIONS 9
4.1 TFT LCD Module
4.2 Back-Light Unit
4.3 PWM Duty Ratio vs Brightness
5 INTERFACE CONNECTION 12
5.1 Electrical Interface Connection
5.2 LVDS Interface
5.3 Data Format
6 SIGNAL TIMING SPECIFICATIONS 15
6.1 Timing Parameter of TFT LCD Module Input Signal
6.2 Timing Waveform of TFT LCD Module Input Signal
6.3 LVDS Rx Interface Timing Parameters
6.4 Input Signals, Basic Display Colors & Cray Scale Of Colors
6.5 Power Sequence
7 MECHANICAL CHARACTERISTICS 19
8 RELIABLITY 21
9 PRODUCT SERIAL NUMBER 22
10 PACKING 23
11 HANDING & CAUTIONS 25
12 APPENDIX 26
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
1.0 GENERAL DESCRIPTION
HV056WX1-100 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 5.6 inch diagonally measured active area with WXGA resolutions (1280 horizontal by 800 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is adapted for a low reflection and higher color type.
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 Parameter Specification Unit Remarks Active area 120.96(H) × 75.60(V) mm Number of pixels 1280(H) ×800(V) pixels Pixel pitch 94.5(H) ×94.5(V) um Pixel arrangement RGB Vertical stripe Display colors 262,144 colors Display mode Normally Black Weight TBD (Typ.) gram Back-light Bottom edge side, 16-LEDs type White LED z High Resolution & Wide View (HFFS Technology) z 3.3 V Logic Power & 12V LED Power Supply z 1 Channel LVDS Interface z 262,144 Colors z Low Weight (Slimming Glass & Slim LGP LED Backlight Technology) z Compact Design (Source & Gate IC of the COG Type) z Green Product (RoHS Compliant) z Display terminals for Ultra Mobility Personal Computer. The followings are general specification at the model HV056WX1-100. < Table 1. General Specification >
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 Parameter Symbol Min. Max. Unit Remarks Logic Power Supply VDD VSS-0.3 5.0 V Back-light Power Supply HVDD -0.3 40.0 V Ta = 25 ℃ Back-Light LED Reverse Voltage V R -5 V + 25 ℃ ILED -3 0 m A Back-light LED Current + 50 ℃ ILED -2 0 m A Note 1 Operating Temperature TOPR 06 0 ℃ Storage Temperature TSTG -20 70 ℃ Note 1, 2 Note : 1. Ambient temperature vs allowable forward current are shown in the figure below. 2. Temperature and relative humidity range are shown in the figure below. 90% RH Max. ( 40℃≥ Ta) Maximum wet - bulb temperature at 39℃ or less. ( > 40℃) No condensation.
2.0 ABSOLUTE MAXIMUM RATINGS
The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. The operational and non-operational maximum voltage and current values are listed in Table 2. < Table 2. Absolute Maximum Ratings > [VSS=GND=0V] Operating Range Storage Range -40 -20 0 20 40 60 80 Temperature (℃) (40, 90) (50, 50) (60, 27) 100 Relative Humudity
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
3.0 OPTICAL SPECIFICATION
The test of Optical specification shall be measured in a dark room (ambient luminance ≤ 1 lux and temperature = 25±2℃) with the equipment of Luminance meter system (Goniometric system and TOPCON BM-5) and test unit shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of θ and Φ equal to 0°. We refer to θØ=0 (=θ3 ) as the 3 o’clock direction (the “right”), θØ=90 (= θ12 ) as the 12 o’clock direction (“upward”), θØ=180 (= θ9 ) as the 9 o’clock direction (“left”) and θØ=270(= θ6 ) as the 6 o’clock direction (“bottom”). While scanning θ and/or Ø, the center of the measuring spot on the Display surface shall stay fixed. The backlight should be operating for 30 minutes prior to measurement. < Table 3. Optical Specifications > Parameter Symbol Condition Min Typ Max Unit Remark Θ3 80 85 - Deg. Horizontal Θ9 80 85 - Deg. Θ12 80 85 - Deg. Viewing Angle CR > 10 Note 1 Θ6 80 85 - Deg. Vertical Contrast ratio CR - 500 - Note 2 Luminance of White Y w 250 300 - cd/m2 White Luminance uniformity ΔY9 Θ = 0° 75 - - % Note 4,5 Wx TBD White Wy TBD Rx TBD Red Reproduction of color Θ= 0° (Center) Normal Viewing Angle Note 3 Ry TBD Gx TBD Green Gy TBD Bx TBD Blue By TBD Response Time (Tr + Td) Ta= 25° C 30 ms Note 6 Cross Talk CT Θ= 0° -- 2.0 % Note 7
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 Note : 1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to the LCD surface. (see Figure1 in Appendix). 2. Contrast measurements shall be made at viewing angle of θ= 0° and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state. (See Figure 1 in Appendix) Luminance Contrast Ratio (CR) is defined mathematically as CR = Luminance when displaying a white raster / Luminance when displaying a black raster. 3. Reference only / Standard Front Surface Treatment Measured with green cover glass. The color chromaticity coordinates specified in Table 3 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel. 4. The White luminance uniformity on LCD surface is then expressed as : ΔY = ( Minimum Luminance of 9 points / Maximum Luminance of 9 points ) * 100 (See Figure 2 shown in Appendix). 5. The electro-optical response time measurements shall be made as Figure 3 shown in Appendix by switching the “data” input signal ON and OFF. The times needed for the luminance to change from 10% to 90% is Tr, and 90% to 10% is Td. 6. Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark (Refer to Figure 5 in Appendix) YB -Y A YB Cross-Talk (%) = × 100
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
4.0 ELECTRICAL SPECIFICATION
< Table 4. LCD Module Electrical Specification > [Ta =25±2 ℃] Values Parameter Symbol Min Typ Max Unit Remark Logic Power Supply VDD 3.0 3.3 3.6 V Window XP PTYP TBD mW Vertical Sub Line PMAX TBD mWPower Consumption EBL PEBL TBD mW Note 1 Vsync Frequency fV - 60 75 Hz Hsync Frequency fH 49.2 KHz Main Clock Frequency fclk 71.1 MHz High Level Differential Input Signal VIH - - + 100 mV VCM =1.2V Low Level Differential Input Signal VIL - 100 - - mV Note : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for 3.3V at 25℃. a) Typ : Window XP pattern, b) Max : Vertical Sub line pattern c) EBL : Mosaic pattern ( 32 X 32 )
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 < Table 5. Back-Light Unit Electrical Specification > [Ta =25 ±2 ℃] Values Parameter Symbol Min Typ Max Unit Remark Back-Light Power Supply HVDD 4.5 12.0 16.0 V Power Consumption PBL TBD mW Note 1, 4 LED Driver’s Efficiency η - 85 - % Note 2 Back-light PWM Frequency F PWM 100 200 1000 ㎐ High Level PWM Signal Voltage V PWMH 1.4 - 5.0 V Low Level PWM Signal Voltage V PWML 0 - 0.2 V Back-light LED Voltage / Back-light LED Total Voltage VLED /VBL - 3.3 / 26.4 V Note 4 Back-light LED Current / Back-light LED Total Current ILED /IBL - 15 / 30 mA Note 4 Life Time 10,000 - - Hrs By LED Note : 1. The power supply voltage and current is measured and specified at the interface connector of LCM including LED Driver. 2. Reference value, which is measured with LED Driver for 12V. 3. Reference value, which is measured without LED Driver. 4. Calculated value for reference (VLED × ILED × # of LEDs (16EA) ).
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 Note : In case of duty ratio 0%, LED can’t illuminate itself so this state is LED off. In case of duty ratio 100%, the brightness of LED is maximum and the state is LED on.
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 5.0 INTERFACE CONNECTION. < Table 6. Electrical Interface Connection Specification > (CN1 :20347-025E-02, I-PEX) Pin No Symbol Description Pin No Symbol Description 1L E D VDD Back-light Power Supply 14 IN1+ LVDS Receiver Signal (+) 2L E D VDD Back-light Power Supply 15 IN2- LVDS Receiver Signal (-)
3 NC No Connection 16 IN2+ LVDS Receiver Signal (+)
4L E D GND Back-light Ground 17 CLK- LVDS Receiver Clock Signal(-) 5L E D GND Back-light Ground 18 CLK+ LVDS Receiver Clock Signal(+)
6 PWM PWM Brightness Control 19 GND Ground
7 ON/OFF LED Drive ON/OFF 20 TEST TEST PIN
8 GND GROUND 21 GND GROUND
9 GND GROUND 22 NC NON-CONNECTION
10 GND GROUND 23 VDD Logic Power Supply
11 IN0-
LVDS Receiver Signal (-) 24 VDD Logic Power Supply
12 IN0+ LVDS Receiver Signal (+) 25 VDD Logic Power Supply
13 IN1- LVDS Receiver Signal (-)
Note : 1. NC : This pins are only used for BOE HYDIS internal operations 2. Start from left side
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 < Table 7. LVDS Interface Specification > [LVDS Transmitter : THC63LVDM83A] Transmitter Interface 20347-024E-02Input signal Pin No Pin No System (Tx) TFT-LCD (Rx) Pin No. Remark R0 51 R1 52 R2 54 R3 55 R4 56 R5 3 G0 4 OUT0- OUT0+ IN0- IN0+ G1 6 G2 7 G3 11 G4 12 G5 14 B0 15 B1 19 OUT1- OUT1+ IN1- IN1+ B2 20 B3 22 B4 23 B5 24 HSYNC 27 VSYNC 28 DE 30 OUT2- OUT2+ IN2- IN2+ MCLK 31 40 CLKOUT- CLKIN- 17
39 CLKOUT+ CLKIN+ 18
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
5.3 Data Input Format
(1280,1)(1279,1) EVEN (2,1) ODD (1,1) Display Position of Input Data (V-H) B G R B G RB G RBGR
1 Pixel = 3 Dots
G B G R B G RB G RBGR G
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
6.0 SIGNAL TIMING SPECIFICATION
6.1 Timing Parameters of TFT LCD Module Input Signal
< Table 8. Input Timing Parameters Specification > [ DE only, VDD=3.3V, GND=0V, TA=25℃] Parameter Symbol Min Typ Max Unit Note Frame Period T1 810 823 - Lines Vertical Display Period T2 - 800 - Lines One line Scanning Period T3 1350 1440 - Clocks Horizontal Display Period T4 - 1280 - Clocks Clock Frequency 1/T5 - 71.1 - MHz
6.2 Timing Waveforms of TFT LCD Module Input Signal
Valid display data (1280 Clocks) DE DCLK DE DATA SIGNALS
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
6.3 LVDS Rx Interface Timing Parameter
The specification of the LVDS Rx interface timing parameter < Table 9. LVDS Rx Interface Timing Specification> tRIP5 tRIP4 tRIP3 tRIP2 tRIP6 tRIP1 tRIP0 Rx Rx Rx Rx Rx Rx Rx Rx Rx RxRx tRICP Vdiff=0[v]Vdiff=0[v]RxCLKIN+/- RxINz +/- * Z = 0, 1, 2 Item Symbol Min. Typ. Max. Unit Remarks CLKIN Period tRICP 12.50 14.43 25.00 nsec Input Data 0 tRIP0 -0.4 0.0 +0.4 nsec Input Data 1 tRIP1 tRICP/7-0.4 tRICP/7 tRICP/7+0.4 nsec Input Data 2 tRIP2 2 ×tRICP/7-0.4 2 ×tRICP/7 2 ×tRICP/7+0.4 nsec Input Data 3 tRIP3 3 ×tRICP/7-0.4 3 ×tRICP/7 3 ×tRICP/7+0.4 nsec Input Data 4 tRIP4 4 ×tRICP/7-0.4 4 ×tRICP/7 4 ×tRICP/7+0.4 nsec Input Data 5 tRIP5 5 ×tRICP/7-0.4 5 ×tRICP/7 5 ×tRICP/7+0.4 nsec Input Data 6 tRIP6 6 ×tRICP/7-0.4 6 ×tRICP/7 6 ×tRICP/7+0.4 nsec
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 Red Data Green Data Blue Data Colors & Gray Scale R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 Basic Colors White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Darker 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 △ ↓ ↓ ↓ ▽ ↓ ↓ ↓ Brighter 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ▽ 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Gray Scale Of Red Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Darker 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 △ ↓ ↓ ↓ ▽ ↓ ↓ ↓ Brighter 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 ▽ 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 Gray Scale Of Green Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Darker 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 △ ↓ ↓ ↓ ▽ ↓ ↓ ↓ Brighter 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 ▽ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 Gray Scale Of Blue Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 △ 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 1 Darker 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 1 0 △ ↓ ↓ ↓ ▽ ↓ ↓ ↓ Brighter 1 1 1 1 0 1 1 1 1 1 0 1 1 1 1 1 0 1 ▽ 1 1 1 1 1 0 1 1 1 1 1 0 1 1 1 1 1 0 Gray Scale Of White Black White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
6.4 Input Signals, Basic Display Colors & Gray Scale Of Colors
Each color is displayed in sixty-four gray scales from a 6 bit data signal input. A total of 262,144 colors are derived from the resultant 18 bit data.
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29 To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below Note : 1. When the power supply VDD is 0V, Keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. 3. Back Light must be turn on after power for logic and interface signal are valid. Values Parameter Min Typ Max Units T1 0.5 - 10 ms T2 0.5 - 50 ms T3 200 - - ms T4 200 - - ms T5 0.5 - 50 ms T6 3.0 - - s Power Supply Interface Signal ( Input Data ) BLU On/Off Valid T3 T4 0.9VDD 0.1VDD 0.9VDD 0.1VDD
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
7.0 MECHANICAL CHARACTERISTICS
7.1 Dimensional Requirements
Figure 5 (located in Appendix) shows mechanical outlines for the model HV056WX1-100. Other parameters are shown in Table 10. <Table 10. Dimensional Parameters Specification > Parameter Specification Unit Weight 66 (typ) gram Active area 120.96(H) × 75.60(V) mm Pixel pitch 94.5(H) ×94.5(V) um Number of pixels 1280(H) ×800(V) (1 pixel = R + G + B dots) pixels Back-light Edge side 16-LEDs type ( 2 X 8 Array) 7.2 Clearness and Polarizer Hardness. The surface of the LCD has an clear film to increase visibility and a hard coating to reduce scratching.
7.3 Light Leakage
There shall not be visible light from the back-lighting system around the edges of the screen as seen from a distance 50cm from the screen with an overhead light level of 350 [lux.]
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
7.4 Design Guide
Give enough clearance (over 0.3mm) Between the Touch Panel and LCD Module glass to protect a display Give enough clearance (over 0.2mm) Between the Case and LCD Module component to protect a display
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
8.0 RELIABLITY TEST
The Reliability test items and its conditions are shown in below. <Table 12. Reliability Test Conditions > No Test Item Conditions
1 High temperature storage test Ta = 60 °C, 240 hrs
2 Low temperature storage test Ta = -20 °C, 240 hrs
3 High temperature & high humidity
operation test Ta = 50 ℃, 80%RH, 240hrs
4 High temperature operation test Ta = 50 °C, 240 hrs
5 Low temperature operation test Ta = 0 °C, 240 hrs
6 Thermal shock Ta = -20 °C ↔60 °C (30 min), 100 cycle
7 Vibration test
(non-operating) Frequency : 10~500Hz Gravity/AMP : 1.5G Period : X,Y,Z 30min
8 Shock test
(non-operating) Gravity : 220G Pulse width : 2ms, half sine wave ±X, ±Y, ±Z Once for each direction
9 Electro-static discharge test
(non-operating) Air : 150pF, 330ohm, 15KV Contact : 150pF, 330ohm, 8KV
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
9.0 Product Serial Number
No 1. Control Number No 2. Rank / Grade No 3. Line Classification (BOE HYDIS : H, LCM : L, BOE OT : A/B/C) No 4. Year (8 : 2008, 9 : 2009, …) No 5. Month (1, 2, 3,…, 9, X, Y, Z) No 6. FG Code No 7. Serial Number X X X X XXX X X XXXX X X XX BOE HYDIS Barcode
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
10.0 PACKING INFORMATION
BOEHydis provides the standard shipping container for customers, unless customer specifies their packing information. The standard packing method and Barcode information are shown in below.
10.1 Packing Order
Box‐label
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
10.2 Packing Note
y Box Dimension : 387 X 335 X 130 mm y Package Quantity in one Box :
10.3 Box label
y Label Size : 108 mm (L) X 56 mm (W) y Contents Model : HV056WX1-100 Q\ty : Module Q\ty in one box Serial No. : Box Serial No. See next page for detail description. Date : Packing Date FG Code : FG Code of Product 00 0 00 0 0 000000 Type Grade Year Month ITEM-CODE Serial no. FG CODE RoHS Mark MODEL : HV056WX1-100 SERIAL NO. : 0000000000000 Q’TY : XX DATE : XXXX. XX. XX
B2005-C001-A (3/3) A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P0 2008.01.30 SPEC. NUMBER S864-1338 SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE OF 29
11.0 HANDLING & CAUTIONS
(1) Cautions when taking out the module y Pick the pouch only, when taking out module from a shipping package. (2) Cautions for handling the module y As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible. y As the LCD panel and back - light element are made from fragile glass material, impulse and pressure to the LCD module should be avoided. y As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. y Do not pull the interface connector in or out while the LCD module is operating. y Put the module display side down on a flat horizontal plane. y Handle connectors and cables with care. (3) Cautions for the operation y When the module is operating, do not lose CLK, ENAB signals. If any one of these signals is lost, the LCD panel would be damaged. y Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged. (4) Cautions for the atmosphere y Dew drop atmosphere should be avoided. y Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended. (5) Cautions for the module characteristics y Do not apply fixed pattern data signal to the LCD module at product aging. y Applying fixed pattern for a long time may cause image sticking. (6) Other cautions y Do not disassemble and/or re-assemble LCD module. y Do not re-adjust variable resistor or switch etc. yWhen returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages
12.0 APPENDIX
Figure 1. Measurement Set Up Figure 2. White Luminance and Uniformity Measurement Locations (9 points)
Figure 5. TFT-LCD Module Outline Dimension (Front View)
Figure 6. TFT-LCD Module Outline Dimension (Rear View)