HV05-15 AMMSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
© 2013 American Microsemiconductor, Inc. Specifications are subject to change without notice. Aerospace Mgmt. Sys. Cert. AS/EN/JISQ9100:2009 Rev. C ISO9001:2008 Cert No. 45325
133 Kings Road,
Madison, New Jersey 07940 United States of America Tel. 1-973-377-9566, Fax. 1-973-377-3078 www.americanmicrosemi.com Document Page 1 of 1 Revised 06/2013 Avalanche Breakdown Protection Low Forward Voltage Drop Typical IR less than 0.1 μA High Overload Surge Capacity VRRM REPEATING PEAK REVERSE VOLTAGE (KV): 15 TJMAX MAX. JUNCTION TEMP.(°C):……………….. 120 IO AVG. FORWARD CURRENT (MA):……………. 550 IFSM FORWARD SURGE CURRENT (A): ………….. 44 IR1 Normal temp. Reverse Current (ΜA):.. 5.0 MAX IR2 High temp. Reverse Current (ΜA):…….. 50 MAX HIGH TEMP. REVERSE VOLTAGE @ 1000 HRS.: ….. VRM=VRRM, F=50HZ, TAMB=100°C HALF SINE VOLTAGE WITH F=50HZ APPLIED, TAMB=100°C HIGH TEMP. STORAGE @ 1000 HRS.:……………….. TAMB=130±2°C SOLDERING RESISTANCE HEAT TEST:…………………. SOLDER TROUGH TEMP.: 350±10°C, DIP TIME: 3.5S ± 0.5S HIGH PRESSURE SMOKE TEST @ 10 HRS.:…………… 120°C, 2 X 105PA INSULATION RESISTANCE TEST (1000MΩ):……….. BETWEEN THE CENTER OF THE BODY AND TERMINAL (SEE FIG. 1) LEAD BEND TEST:………………………………………….. FORCE 10 N TO THE LEAD, BENT IT TO POS. AND neg. 90° Insulation resistance test condition: Measure between A and B by using a DC 500V Insulation resistance tester Insulation strength test condition: Apply half sine wave voltage with 10kV wave height between A and B in insulation liquid NOTE: TO ORDER WITH QUICK DISCONNECT TERMINALS, REFER HV05-15-qd DURING ORDERING PROCESS.