HSP MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: HSP HSP SPECIFICATIONS ES-3456 Rev.9 Page 1/3 http://www.m-system.co.jp/ Space-saving Plug-in Signal Conditioners H-UNIT LOW FREQUENCY TRANSMITTER (50 Hz minimum) Functions & Features

  • Converting the output from a pulse-type transducer into a standard process signal
  • Excitation
  • High-density mounting Typical Applications
  • Positive displacement flowmeters, turbine flowmeters and vortex flowmeters
  • Proximity switches 26 (1.02) (3.66) mm (inch) 137 (5.39) MODEL: HSP–[1][2]–R[3]

ORDERING INFORMATION

  • Code number: HSP-[1][2]-R[3] Specify a code from below for each of [1] through [3]. (e.g. HSP-2A-R/Q)
  • Frequency range (e.g. 0 – 10 kHz)
  • Special output range (For codes Z & 0)
  • Specify the specification for option code /Q (e.g. /C01/S01) [1] INPUT 1: Dry contact 2: Voltage pulse [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 750 Ω max.) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) E: 0 – 16 mA DC (Load resistance 900 Ω max.) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: 0 to 120 % at 1 – 5 V Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) Input pulse sensing: DC coupled; detecting pulse rise Low-end cutout: 2 to 5 %

MODEL: HSP HSP SPECIFICATIONS ES-3456 Rev.9 Page 2/3 http://www.m-system.co.jp/ INPUT SPECIFICATIONS Excitation: 12 V DC @30 mA; shortcircuit protection Frequency range: 0 – 50 Hz through 10 kHz ■ Dry Contact: Mechanical contact or open collector Pulse width time requirement: 20 μsec. min. for ON and OFF Sensing: Approx. 12 V DC @3 mA ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF ■ Voltage Pulse: Square or sine waveforms Pulse width time requirement: 20 μsec. min. for high and low levels Hi level: 2 – 50 V Lo level: ≤ 1 V Input impedance: 10 kΩ min. OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. ■ DC Voltage: 0 – 12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V INSTALLATION Current consumption: Approx. 85 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail; Standard Rack Mounting Frame BX-16H available Weight: 200 g (0.44 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % (output 10 – 100 %) Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: (0 – 90 %) Approx. 2 sec. for 0 – 50 Hz Approx. 1 sec. for 0 – 100 Hz Approx. 0.5 sec. for 0 – 500 Hz Approx. 0.5 sec. for 0 – 10 kHz Ripple: 0.2 %p-p max. with input ≥ 10 % Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input to output to power)

1500 V AC @ 1 minute (input or output or power to ground)

MODEL: HSP HSP SPECIFICATIONS ES-3456 Rev.9 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 1 2 3 4 3 (.12) 2 (.08) 93 (3.66) (.59) 2–4.5 (.18) HOLE 15 (.59) deep DIN RAIL 35mm wide [3.3 (.13)] 8–M3.5 SCREW 93 (3.66) CLAMP (top & bottom) 137 (5.39) 80 (3.15)

  • When mounting, no extra space is needed between units. 7.8 (.31) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Base Socket Waveform Shaper Output Driver OUTPUT POWER 12V Supply INPUT SENSOR EXCITATION 4kΩ ■ Dry Contact Input Connection Examples – +12VPWR ■ Voltage Pulse – +12VPWR Z S One-Shot Smoother Specifications are subject to change without notice.