HSMW-A10X-XXXXX AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • Industry standard PLCC-2 package (plastic leaded chip carrier)
  • Super high reliability LED package
  • Tight white color binning
  • Super wide viewing angle at 120˚
  • Available in 8 mm carrier tape on 7-inch reel (2000 pieces)
  • Compatible with IR and TTW soldering process

Applications

  • Interior automotive – Instrument panel backlighting – Central console backlighting – Cabin backlighting
  • Office automation, home appliances, industrial equipment – Front panel backlighting – Push button backlighting – Display backlighting

HSM x1 –A x2 x3x4 - x5x6 x7 x8x9 Packaging 0ption Color Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color Device Selection Guide Color Part Number Min. IV (mcd) Typ. IV (mcd) Max. IV (mcd) Test Current (mA) Dice Technology White HSMW-A101-R50J1 100.00 - 395.00 20 InGaN HSMW-A100-T50J1 250.00 - 1000.00 20 InGaN Note: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 0.80 (0.031) 3.50 (0.138) 2.80 (0.110) 3.20 (0.126) 2.20 (0.087) 1.90 (0.073) 0.05 (0.002) 0.80 (0.031) CATHODE MARKING NOTE: ALL DIMENSIONS IN MILLIMETERS (INCHES).

Absolute Maximum Ratings (TA = 25°C) Parameters HSMW DC Forward Current[1] 30 mA Peak Forward Current[2] 90 mA Power Dissipation 114 mW Reverse Voltage 5 V Junction Temperature 110°C Operating Temperature –40°C to +100°C Storage Temperature –40°C to +100°C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty factor = 10%, frequency = 1 kHz. Optical Characteristics (TA = 25°C) Luminous Luminous Intensity/ Typ. Chromaticity Viewing Angle Efficacy, hV[3] Total Flux Dice Coordinates[1] 2q1/2[2] (Degrees) (lm/W) IV (mcd)/FV (lm) Color Part Number Technology x y Typ. Typ. Typ. White HSMW-A10x InGaN 0.31 0.31 120 260 0.45 Notes: 1. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. 2. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation I e = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. Electrical Characteristics (TA = 25°C) Part Forward Voltage, VF (Volts) @ IF = 20 mA Reverse Voltage, VR @ 10 µA Thermal Resistance Number Typ. Max. Min. RθJP (°C/W) HSMW 3.4 4.05 5 280

For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0645EN AV02-0490EN - June 19, 2007 Intensity Bin Select (X5X6) Individual reel will contain parts from one half bin only. X5 Min Iv Bin

0 Full Distribution

3 3 half bins starting from X51 4 4 half bins starting from X51 5 5 half bins starting from X51 7 3 half bins starting from X52 8 4 half bins starting from X52 9 5 half bins starting from X52 Intensity Bin Limits Bin ID Min. (mcd) Max. (mcd) Q1 71.50 90.00 Q2 90.00 112.50 R1 112.50 140.00 R2 140.00 180.00 S1 180.00 224.00 S2 224.00 285.00 T1 285.00 355.00 T2 355.00 450.00 U1 450.00 560.00 U2 560.00 715.00 V1 715.00 900.00 V2 900.00 1125.00 Tolerance of each bin limit = ± 12%. Color Bin Limits Bin ID Limits (Chromaticity Coordinates) A x 0.352 0.365 0.365 0.352 y 0.377 0.395 0.360 0.341 B x 0.340 0.352 0.352 0.340 y 0.360 0.377 0.341 0.325 C x 0.327 0.340 0.340 0.327 y 0.342 0.360 0.325 0.306 D x 0.315 0.327 0.327 0.315 y 0.325 0.342 0.306 0.290 E x 0.302 0.315 0.315 0.302 y 0.307 0.325 0.290 0.271 F x 0.290 0.302 0.302 0.290 y 0.290 0.307 0.271 0.255 Packaging Option (X8X9) Option Test Package Reel Current Type Size J1 20 mA Top 7 inch Mount J2 10 mA Top 7 inch Mount Figure 14. Color Bin Select (X7) Individual reel will contain parts from one full bin only. Q A, B and C only P B, C and D only N C, D and E only M D, E and F only

1 A, B, C and D only

3 B, C, D and E only

4 C, D, E and F only

5 A, B, C, D and E only

6 B, C, D, E and F only

Note: Tolerance for each bin limit = ± 0.02. 0.25 0.40 0.25 0.30 0.40 Y-COORDINATE X-COORDINATE 0.35 0.30 0.35 F E D C B A