DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

/g120 Surface Mount Packages /g120 High Breakdown Voltage /g120 Low FIT (Failure in Time) Rate* /g120 Six-sigma Quality Level /g120 Single, Dual and Quad Versions /g120 Tape and Reel Options Available /g120 Lead-free * For more information see the Surface Mount Schottky Reliability Data Sheet. COMMON CATHODE UNCONNECTED PAIR COMMON ANODE SERIES SINGLE BRIDGE QUAD #812 COMMON CATHODE QUAD M UNCONNECTED TRIO L BRIDGE QUAD P COMMON ANODE QUAD N RING QUAD R 123 654 HIGH ISOLATION UNCONNECTED PAIR K 123 654 123 654 123 654 123 654 123 654 COMMON CATHODE F COMMON ANODE E SERIES C SINGLE B

Absolute Maximum Ratings[1] TC = 25°C Symbol Parameter Unit SOT-23/SOT-143 SOT-323/SOT-363 If Forward Current (1 μs Pulse) Amp 1 1 PIV Peak Inverse Voltage V Same as V BR Same as VBR Tj Junction Temperature °C 150 150 Tstg Storage Temperature °C -65 to 150 -65 to 150 /g84jc Thermal Resistance[2] °C/W 500 150 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. T C = +25°C, where TC is defined to be the temperature at the package pins where contact is made to the circuit board. Notes: 1. Package marking provides orientation and identification. 2. See “Electrical Specifications” for appropriate package marking. ESD WARNING: Handling Precautions Should Be Taken To Avoid Static Discharge. Pin Connections and Package Marking, SOT-363 GUx1 Electrical Specifications TA = 25°C, Single Diode [3] Part Number HSMS [4] Package Marking Code Lead Code Configuration Minimum Breakdown Voltage VBR (V) Maximum Forward Voltage VF (mV) Maximum Forward Voltage VF (V) @ IF (mA) Maximum Reverse Leakage IR (nA) @ VR (V) Maximum Capacitance CT (pF) Typical Dynamic Resistance RD (Ω) [5]

2800 A0 0 Single

70 410 1.0 @ 15 200 @ 50 2.0 35

2802 A2 2 Series

2803 A3 3 Common Anode

2804 A4 4 Common Cathode

2805 A5 5 Unconnected Pair

2808 A8 8 Bridge Quad

[4] 280B A0 B Single 280C A2 C Series 280E A3 E Common Anode 280F A4 F Common Cathode 280K AK K High Isolation Unconnected Pair 280L AL L Unconnected Trio 280M H M Common Cathode Quad 280N N N Common Anode Quad 280P AP P Bridge Quad 280R O R Ring Quad Test Conditions I R = 10 mA I F = 1 mA V F = 0 V f = 1 MHz IF = 5 mA Notes: 1. DVF for diodes in pairs and quads in 15 mV maximum at 1 mA. 2. DCTO for diodes in pairs and quads is 0.2 pF maximum. 3. Effective Carrier Lifetime (t) for all these diodes is 100 ps maximum measured with Krakauer method at 5 mA. 4. See section titled “Quad Capacitance. ” 5. R D = RS + 5.2 Ω at 25°C and If = 5 mA.

Capacitance of Schottky diode quads is measured using an HP4271 LCR meter. This instrument effectively isolates individual diode branches from the others, allowing accurate capacitance measurement of each branch or each diode. The conditions are: 20 mV R.M.S. voltage at 1 MHz. Avago defines this measurement as “CM” , and it is equivalent to the capaci tance of the diode by itself. The equivalent diagonal and adja cent capacitances can then be calculated by the formulas given below. In a quad, the diagonal capaci tance is the capacitance between points A and B as shown in the figure below. The diagonal capacitance is calculated using the follow- ing formula C C 1 + C2 C 3 + C4 C2 C4 A B C The equivalent adjacent capacitance is the capacitance between points A and C in the figure below. This capaci- tance is calculated using the following formula 1 C C 2 C 3 C 4 This information does not apply to cross-over quad diodes. SPICE Parameters Parameter Units HSMS-280x BV V7 5 CJ0 pF 1.6 EG eV 0.69 IBV A E-5 IS A 3.00E-08 N 1.08 R S Ω3 0 PB V 0.65 PT 2 M 0.5 Cj Rj RS Rj = 8.33 X 10-5 nT Ib + Is where Ib = externally applied bias current in amps Is = saturation current (see table of SPICE parameters) T = temperature, K n = ideality factor (see table of SPICE parameters) Note: To effectively model the packaged HSMS-280x product, please refer to Application Note AN1124. RS = series resistance (see Table of SPICE parameters) Cj = junction capacitance (see Table of SPICE parameters) Linear Equivalent Circuit, Diode Chip

Figure 8. Surface Mount Assembly Profile. than those with a greater mass. to produce a reflow of the solder. MAX) should not exceed 260°C. achieve a uniform reflow of solder.

Outline 23 (SOT-23) Outline SOT-323 (SC-70 3 Lead) Part Number Ordering Information Part Number No. of Devices Container HSMS-280x-TR2G 10000 13” Reel HSMS-280x-TR1G 3000 7” Reel HSMS-280x-BLKG 100 antistatic bag e B C E XXX L D A Notes: XXX-package marking Drawings are not to scale DIMENSIONS (mm) MIN. 0.79 0.000 0.30 0.08 2.73 1.15 0.89 1.78 0.45 2.10 0.45 MAX. 1.20 0.100 0.54 0.20 3.13 1.50 1.02 2.04 0.60 2.70 0.69 SYMBOL A B C D e E L e B C E XXX L D A Notes: XXX-package marking Drawings are not to scale DIMENSIONS (mm) MIN. 0.80 0.00 0.15 0.08 1.80 1.10 1.80 0.26 MAX. 1.00 0.10 0.40 0.25 2.25 1.40 2.40 0.46 SYMBOL A B C D e E L 1.30 typical 0.65 typical

Note: "AB" represents package marking code. "C" represents date code. END VIEW 8 mm 4 mm TOP VIEW ABC ABC ABC ABC Note: "AB" represents package marking code. "C" represents date code. END VIEW 8 mm 4 mm TOP VIEW ABC ABC ABC ABC END VIEW 8 mm 4 mm TOP VIEW Note: "AB" represents package marking code. "C" represents date code. ABC ABC ABC ABC Device Orientation For Outline SOT-143 For Outlines SOT-23, -323 For Outline SOT-363 Outline 143 (SOT-143) Outline SOT-363 (SC-70 6 Lead) Package Dimensions (Continued) e B C E XXX L D A Notes: XXX-package marking Drawings are not to scale DIMENSIONS (mm) MIN. 0.79 0.013 0.36 0.76 0.086 2.80 1.20 0.89 1.78 0.45 2.10 0.45 MAX. 1.097 0.10 0.54 0.92 0.152 3.06 1.40 1.02 2.04 0.60 2.65 0.69 SYMBOL A B C D e E L EHE D e b AA2 L c DIMENSIONS (mm) MIN. 1.15 1.80 1.80 0.80 0.80 0.00 0.15 0.08 0.10 MAX. 1.35 2.25 2.40 1.10 1.00 0.10 0.30 0.25 0.46 SYMBOL E D HE A e b c L

0.650 BCS

Tape Dimensions and Product Orientation For Outline SOT-23 For Outline SOT-143 9° MAX P D P2 E F W Ko 8° MAX 13.5° MAX DESCRIPTION SYMBOL SIZE (mm) SIZE (INCHES) LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER A P 3.15 ± 0.10 2.77 ± 0.10 1.22 ± 0.10 4.00 ± 0.10 1.00 + 0.05 0.124 ± 0.004 0.109 ± 0.004 0.048 ± 0.004 0.157 ± 0.004 0.039 ± 0.002 CAVITY DIAMETER PITCH POSITION D P E 1.50 + 0.10 4.00 ± 0.10 1.75 ± 0.10 0.059 + 0.004 0.157 ± 0.004 0.069 ± 0.004 PERFORATION WIDTH THICKNESS W 8.00 + 0.30 - 0.10 0.229 ± 0.013 0.315 + 0.012 - 0.004 0.009 ± 0.0005 CARRIER TAPE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) F 3.50 ± 0.05 2.00 ± 0.05 0.138 ± 0.002 0.079 ± 0.002 DISTANCE BETWEEN CENTERLINE WF E P2P0 DP DESCRIPTION SYMBOL SIZE (mm) SIZE (INCHES) LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER P 3.19 ± 0.10 2.80 ± 0.10 1.31 ± 0.10 4.00 ± 0.10 1.00 + 0.25 0.126 ± 0.004 0.110 ± 0.004 0.052 ± 0.004 0.157 ± 0.004 0.039 + 0.010 CAVITY DIAMETER PITCH POSITION D P E 1.50 + 0.10 4.00 ± 0.10 1.75 ± 0.10 0.059 + 0.004 0.157 ± 0.004 0.069 ± 0.004 PERFORATION WIDTH THICKNESS W 8.00 + 0.30 - 0.10 0.254 ± 0.013 0.315+ 0.012 - 0.004 0.0100 ± 0.0005 CARRIER TAPE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) F 3.50 ± 0.05 2.00 ± 0.05 0.138 ± 0.002 0.079 ± 0.002 DISTANCE 9° MAX 9 ° MAX

Tape Dimensions and Product Orientation For Outlines SOT-323, -363 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5989-4020EN AV02-0533EN - April 14 , 2010 P F W C D E An t1 (CARRIER TAPE THICKNESS) Tt (COVER TAPE THICKNESS) An DESCRIPTION SYMBOL SIZE (mm) SIZE (INCHES) LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER P 2.40 ± 0.10 2.40 ± 0.10 1.20 ± 0.10 4.00 ± 0.10 1.00 + 0.25 0.094 ± 0.004 0.094 ± 0.004 0.047 ± 0.004 0.157 ± 0.004 0.039 + 0.010 CAVITY DIAMETER PITCH POSITION D E 1.55 ± 0.05 4.00 ± 0.10 1.75 ± 0.10 0.061 ± 0.002 0.157 ± 0.004 0.069 ± 0.004 PERFORATION WIDTH THICKNESS W 8.00 ± 0.30 0.254 ± 0.02 0.315 ± 0.012 0.0100 ± 0.0008 CARRIER TAPE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) F 3.50 ± 0.05 2.00 ± 0.05 0.138 ± 0.002 0.079 ± 0.002 DISTANCE FOR SOT-323 (SC70-3 LEAD) An 8 °C MAX FOR SOT-363 (SC70-6 LEAD) 10 °C MAX ANGLE WIDTH TAPE THICKNESS C Tt 5.4 ± 0.10 0.062 ± 0.001 0.205 ± 0.004 0.0025 ± 0.00004 COVER TAPE