DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
LED with InGaN die Surface mount device 0402 footprint PCB package Compatible with reflow soldering Tape in 8mm carrier tape on a 7 inch diameter reel
Applications
Backlighting Indicator Package Dimensions Note: 1. All dimensions are in millimeters (inches). 2. Tolerance ±0.1mm (±0.004in) unless otherwise specified. Caution: LEDs are ESD sensitive device. Please observe appropriate precautions during handling and processing.
Absolute Maximum Value at TA = 25°C Parameter InGaN Blue Unit Forward Current1 20 mA Peak Pulsing Current2 100 mA Power Dissipation 78 mW LED Junction Temperature 95 °C Operating Temperature Range -30 to 85 °C Storage Temperature Range -40 to 85 °C Note: 1. Derate as shown in Figure 5. 2. Pulse condition of 1/10 duty and 0.1ms width. Optical Characteristics at TA = 25°C, IF=20mA Color Luminous Intensity Iv (mcd)1 Peak Wavelength λp(nm) Dominant Wavelength λd(nm)2 Viewing Angle 2θ1/23 Min Typ Typ Typ Typ Blue 28.5 80.0 459 465 130 Note: 1. The luminous intensity is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. Viewing angle is the off axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristics at TA = 25°C, IF=20mA Color Forward Voltage Vf (V) 1 Reverse Voltage Vr(V) @Ir=100μA2 Thermal Resistance Rthj-pin(°C/W) Min Ma x Min Typ Blue 2.7 3.9 5 300 Note: 1. Forward voltage tolerance is ±0.1V. 2. Reverse voltage Indicates product final testing, long terms reverse bias is not recommended.
Luminous Intensity Bin Limits Bin ID Luminous Intensity (mcd) Min Ma x N 28.5 45.0 P 45.0 71.5 Q 71.5 112.5 R 112.5 180.0 S 180.0 285.0 T 285.0 450.0 U 450.0 715.0 V 715.0 1125.0 W 1125.0 1800.0 X 1800.0 2850.0 Y 2850.0 4500.0 Tolerance ±15% Blue Color Bin Limits Bin ID Dominant Wavelength (nm) Min Ma x A 460 465 B 465 470 C 470 475 D 475 480 Tolerance ±1nm Forward Voltage Bin Limits Bin ID Forward Voltage (V) Min Ma x Z 2.7 2.9 1 2.9 3.1 2 3.1 3.3 3 3.3 3.5 4 3.5 3.7 5 3.7 3.9 Tolerance ±0.1V
Figure 10. Tape dimensions
- Handling of moisture sensitive device This product has a Moisture Sensitive Level 2a rating per JEDEC J-STD-020. Refer to Avago Application Note AN5305, Handling of Moisture Sensitive Surface Mount Devices, for additional details and a review of proper handling procedures. (a) Before use - An unopened moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has exceeded 12 months and the humidity Indicato r Card (HIC) indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. - It is recommended that the MBB not be opened prior to assembly (e.g. for IQC). (b) Control after opening the MBB - The humidity indicator card (HIC) shall be read immediately upon opening of MBB. - The LEDs must be kept at <30°C / 60%RH at all time s and all high temperature related processes including soldering, curing or rework need to be completed within 672 hours. (c) Control for unfinished reel - Unused LEDs must be stored in a sealed MBB with desiccant or desiccator at <5%RH. (d) Control of assembled boards - If the PCB soldered with the LEDs is to be subjecte d to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure that all LEDs have not exceeded their floor life of 672 hours. (e) Baking is required if: - The HIC indicator is not blue at 10% and is pink at 5%. - The LEDs are exposed to condition of >30°C / 60% RH at any time. - The LED floor life exceeded 672hrs. The recommended baking condition is: 60±5ºC for 20hrs Baking should only be done once. Disclaimer Avago’s products are not specifically designed, manufactur ed or authorized for sale as parts, components or assemblies for the planning, constructi on, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. Customer is solely resp onsible, and waives all rights to make claims against Avago or its suppliers, for all loss, damage, expense or liability in connection with such use. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademar ks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved.