DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

 LED with InGaN die  Surface mount device with 0402 footprint  Compatible with reflow soldering  Tape in 8mm carrier tape on a 7 inch diameter reel

Applications

 Backlighting  Indicator Package Dimensions Note: 1. All dimensions are in millimeters (inches). 2. Tolerance ±0.1mm (±0.004in) unless otherwise specified. Caution: LEDs are class 1A ESD sensitive per ANSI/ESD A/JEDEC JS-001. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details.

Absolute Maximum Value at TJ = 25°C Parameter Green Unit Forward Current1 20 mA Peak Pulsing Current2 100 mA Power Dissipation 78 mW LED Junction Temperature 95 °C Operating Temperature Range -30 to 85 °C Storage Temperature Range -40 to 85 °C Note: 1. Derate as shown in Figure 6. 2. Pulse condition of 1/10 duty and 0.1ms width. Optical/Electrical Characteristics at TJ = 25°C, IF=20mA Parameter Min Typ Ma x Unit Luminous Intensity Iv1 112.5 222.8 mcd Peak Wavelength λp 516 nm Dominant Wavelength λd2 522 nm Viewing Angle 2θ1/23 130 ° Forward Voltage Vf 2.7 3.9 V Reverse Voltage Vr4 at Ir=100μA 5 V Thermal Resistance Rθj-p 300 °C/W Note: 1. The luminous intensity is measured at the mechanical axis of the LED package. The actual peak of the spatial radiation pattern may not be aligned with the axis. 2. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. Viewing angle is the off axis angle where the luminous intensity is ½ the peak intensity. 4. Reverse voltage Indicates product final testing, long terms reverse bias is not recommended.

Figure 1. Spectrum Figure 2. Fo rward current vs Forward voltage

Figure 10. Carrier tape dimensions moisture sensitive device as stated in below section. (b) Do not apply any pressure or force on the LED during reflow and after reflow when the LED is still hot.

  1. Handling of moisture sensitive device This product has a Moisture Sensitive Level 2a rating per JEDEC J-STD-020. Refer to Avago Application Note AN5305, Handling of Moisture Sensitive Surface Mount Devices, for additional details and a review of proper handling procedures. (a) Before use - An unopened moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has exceeded 12 months and the humidity Indicato r Card (HIC) indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. - It is recommended that the MBB not be opened prior to assembly (e.g. for IQC). (b) Control after opening the MBB - The humidity indicator card (HIC) shall be read immediately upon opening of MBB. - The LEDs must be kept at <30°C / 60%RH at all time s and all high temperature related processes including soldering, curing or rework need to be completed within 672 hours. (c) Control for unfinished reel - Unused LEDs must be stored in a sealed MBB with desiccant or desiccator at <5%RH. (d) Control of assembled boards - If the PCB soldered with the LEDs is to be subjecte d to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure that all LEDs have not exceeded their floor life of 672 hours. (e) Baking is required if: - The HIC indicator is not blue at 10% and is pink at 5%. - The LEDs are exposed to condition of >30°C / 60% RH at any time. - The LED floor life exceeded 672hrs. The recommended baking condition is: 60±5ºC for 20hrs Baking should only be done once. 2. Disclaimer Avago’s products are not specifically designed, manufactur ed or authorized for sale as parts, components or assemblies for the planning, constructi on, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. Customer is solely resp onsible, and waives all rights to make claims against Avago or its suppliers, for all loss, damage, expense or liability in connection with such use. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademar ks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved.