DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
/g120 Diodes Optimized for: – Low Distortion Attenuating – Microwave Frequency Operation /g120 Surface Mount Packages – Single and Dual Versions – Tape and Reel Options Available /g120 Low Failure in Time (FIT) Rate [1] /g120 Lead free Note: 1. For more information see the Surface Mount PIN Reliability Data Sheet. Package Lead Code Identification, SOT-23 (Top View) Description/Applications The HSMP-381x series is specifically designed for low dis- tortion attenuator applications. The HSMP-481x products feature ultra low parasitic inductance in the SOT-23 and SOT-323 packages. They are specifically designed for use at frequencies which are much higher than the upper limit for conventional diodes. A SPICE model is not available for PIN diodes as SPICE does not provide for a key PIN diode characteristic, carrier lifetime. COMMON CATHODE COMMON ANODE SERIES SINGLE 4810 DUAL CATHODE REVERSE SERIES Package Lead Code Identification, SOT-323 (Top View) COMMON CATHODE F COMMON ANODE E SERIES C SINGLE B 481B DUAL CATHODE
Absolute Maximum Ratings[1] TC = +25°C Symbol Parameter Unit SOT-23 SOT-323 If Forward Current (1 μs Pulse) Amp 1 1 PIV Peak Inverse Voltage V Same as V BR Same as VBR Tj Junction Temperature °C 150 150 Tstg Storage Temperature °C -65 to 150 -65 to 150 /g84jc Thermal Resistance [2] °C/W 500 150 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. T C = +25°C, where TC is defined to be the temperature at the package pins where contact is made to the circuit board. Electrical Specifications TC = +25°C (Each Diode) Conventional Diodes Part Number HSMP- Package Marking Code Lead Code Configuration Minimum Breakdown Voltage V BR (V) Maximum Total Capacitance CT (pF) Minimum Resistance at IF = 0.01mA, RH (Ω) Maximum Resistance at IF = 20mA, RL (Ω) Maximum Resistance at IF = 100mA, RT (Ω) Resistance at IF = 1mA, RM (Ω)
3810 E0 0 Single
100 0.35 1500 10 3.0 48 to 70
3812 E2 2 Series
3813 E3 3 Common Anode
3814 E4 4 Common Cathode
3815 E5 5 Reverse Series
R = VBR Measure I R≤ 10uA VR = 50V f = 1MHz IF = 0.01mA f = 100MHz IF = 20mA f = 100MHz IF = 100mA f = 100MHz IF = 1mA f = 100MHz High Frequency (Low Inductance, 500 MHz – 3 GHz) PIN Diodes Part Number HSMP- Package Marking Code Lead Code Configuration Minimum Breakdown Voltage V BR (V) Maximum Series Resistance RS (Ω) Series Resistance IF = 1mA, RM (Ω) Typical Total Capacitance CT (pF) Maximum Total Capacitance CT (pF) Typical Total Inductance LT (nH)
4810 EB B Dual Cathode
100 3 48 - 70 0.35 0.4 1 481B EB B Dual Cathode Test Conditions V R = VBR Measure IR ≤ 10μA IF = 100mA f = 100MHz IF = 1mA f = 100MHz VR = 50V f = 1MHz VR = 50V f = 1MHz f = 500MHz - 3GHz
Figure 2. RF Resistance vs. Forward Figure 1. RF Capacitance vs. Reverse
1 MHz
30 MHz
Figure 3. 2nd Harmonic Input Figure 4. Forward Current vs. Forward
125 C 25 C –50 C
Figure 5. Four Diode π Attenuator. See Application Note 1048
- Typical values were derived using limited samples during initial product characterization and may not be representative of the overall distribution.
Figure 6. Internal Connections. Figure 7. Circuit Layout. Figure 8. Circuit Layout. Figure 9. Equivalent Circuit.
50 OHM MICROSTRIP LINES
Outline 23 (SOT-23) Package Characteristics Outline SOT-323 (SC-70) Option Descriptions -BLKG = Bulk, 100 pcs. per antistatic bag -TR1G = Tape and Reel, 3000 devices per 7" reel -TR2G = Tape and Reel, 10,000 devices per 13" reel Tape and Reeling conforms to Electronic Industries RS-481, “Taping of Surface Mounted Components for Automated Placement. ”
Ordering Information
Specify part number followed by option. For example: HSMP - 381x - XXX Bulk or Tape and Reel Option Part Number; x = Lead Code Surface Mount PIN e B C E XXX L D A Notes: XXX-package marking Drawings are not to scale DIMENSIONS (mm) MIN. 0.79 0.000 0.30 0.08 2.73 1.15 0.89 1.78 0.45 2.10 0.45 MAX. 1.20 0.100 0.54 0.20 3.13 1.50 1.02 2.04 0.60 2.70 0.69 SYMBOL A B C D e E L e B C E XXX L D A Notes: XXX-package marking Drawings are not to scale DIMENSIONS (mm) MIN. 0.80 0.00 0.15 0.08 1.80 1.10 1.80 0.26 MAX. 1.00 0.10 0.40 0.25 2.25 1.40 2.40 0.46 SYMBOL A B C D e E L 1.30 typical 0.65 typical
Note: "AB" represents package marking code. "C" represents date code. END VIEW 8 mm 4 mm TOP VIEW ABC ABC ABC ABC USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL
9 MAX
P D P2 E F W Ko 8 MAX
13.5 MAX
DESCRIPTION SYMBOL SIZE (mm) SIZE (INCHES) LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER A P 3.15 ± 0.10 2.77 ± 0.10 1.22 ± 0.10 4.00 ± 0.10 1.00 + 0.05 0.124 ± 0.004 0.109 ± 0.004 0.048 ± 0.004 0.157 ± 0.004 0.039 ± 0.002 CAVITY DIAMETER PITCH POSITION D P E 1.50 + 0.10 4.00 ± 0.10 1.75 ± 0.10 0.059 + 0.004 0.157 ± 0.004 0.069 ± 0.004 PERFORATION WIDTH THICKNESS W 8.00 + 0.30 - 0.10 0.229 ± 0.013 0.315 + 0.012 - 0.004 0.009 ± 0.0005 CARRIER TAPE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) F 3.50 ± 0.05 2.00 ± 0.05 0.138 ± 0.002 0.079 ± 0.002 DISTANCE BETWEEN CENTERLINE Tape Dimensions and Product Orientation For Outline SOT-23 Device Orientation For Outlines SOT-23/323
Tape Dimensions and Product Orientation For Outline SOT-323 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved. Obsoletes AV01-0378EN AV02-0402EN - December 22, 2009 P F W C D E An t1 (CARRIER TAPE THICKNESS) Tt (COVER TAPE THICKNESS) An DESCRIPTION SYMBOL SIZE (mm) SIZE (INCHES) LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER A P 2.40 ± 0.10 2.40 ± 0.10 1.20 ± 0.10 4.00 ± 0.10 1.00 + 0.25 0.094 ± 0.004 0.094 ± 0.004 0.047 ± 0.004 0.157 ± 0.004 0.039 + 0.010 CAVITY DIAMETER PITCH POSITION D P E 1.55 ± 0.05 4.00 ± 0.10 1.75 ± 0.10 0.061 ± 0.002 0.157 ± 0.004 0.069 ± 0.004 PERFORATION WIDTH THICKNESS W 8.00 ± 0.30 0.254 ± 0.02 0.315 ± 0.012 0.0100 ± 0.0008 CARRIER TAPE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) F 3.50 ± 0.05 2.00 ± 0.05 0.138 ± 0.002 0.079 ± 0.002 DISTANCE FOR SOT-323 (SC70-3 LEAD) An 8 C MAX FOR SOT-363 (SC70-6 LEAD) 10 C MAX ANGLE WIDTH TAPE THICKNESS C Tt 5.4 ± 0.10 0.062 ± 0.001 0.205 ± 0.004 0.0025 ± 0.00004 COVER TAPE