HSMM-A100-U4PJ1 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

Features

  • Miniature Size - 1.6 × 2.0 mm size - 0.9 mm height - Standard 1.6 × 2.0 mm PCB footprint
  • High Isolation
  • High Power Rating - +33 dBm Abs. Max. Tx Power
  • Environmental - RoHS Compliant - Halogen free - TBBPA Free Specifications
  • Rx Band Performance, 1805 – 1880 MHz, – 20 to +85 °C - Insertion Loss: 4.0 dB Max. - Rx Noise Blocking: 50 dB Min.
  • Tx Band Performance , 1710 – 1785 MHz, – 20 to +85 °C - Insertion Loss: 3.5 dB Max . - Tx Interferer Blocking: 55 dB Min.

Applications

Smartphones, tablets, data terminals, and other mobile/ portable communication devices operating in the LTE Band 3 frequency range. Ant Port 3 (Pin 6) Rx Port 2 (Pin 1) Tx Port 1 (Pin 3)

Ant, Rx Z0 = 50 Ω, Tx port includes matching to 50 Ω as shown in Figure 1. Symbol Parameter Units Antenna Port to Receive Port S23 Insertion Loss in Receive Band (1805 – 1880 MHz) dB 4.0 1.4 3.5 4.0 S23 Insertion Loss, Average any 10 MHz channel within Rx Band dB 3.7 1.5 3.7 3.7 S23 Insertion Loss Flatness any 5 MHz within Rx Band dB 1.5 0.2 1.5 1.5 S23 Attenuation, 10 – 1710 MHz dB 30 30 40 30 S23 Attenuation in Transmit Band [4] (1710 – 1785 MHz) dB 45 45 65 45 S23 Attenuation, 1965 – 2400 MHz dB 25 25 49 25 S23 Attenuation, ISM Band (2400 – 2484 MHz) dB 30 30 62 30 S23 Attenuation, 2484 – 4000 MHz dB 25 25 67 25 S22 Return Loss (SWR) of Rx Port in Rx Band S33 Return Loss (SWR) of Ant Port in Rx Band Transmit Port to Antenna Port ZTx Impedance of Transmit Port Ω 34 +j0.7 S31 Insertion Loss in Transmit Band [4] (1710 – 1785 MHz) dB 3.5 1.4 3.2 3.5 S31 Insertion Loss in Transmit Band [4] [5] S31 Insertion Loss, Average [4] 10 MHz channels within Tx Band dB 2.7 1.4 2.7 2.7 S31 Insertion Loss Flatness [4] any 5 MHz within Tx Band dB 1.5 0.2 1.5 1.5 S31 Insertion Loss Flatness [4] any 10 MHz within Tx Band dB 2.5 0.3 2.5 2.5 S31 Attenuation, 10 – 1565.4 MHz dB 30 30 41 30 S31 Attenuation, Wideband GPS Band (1565.4 – 1573.3 MHz) dB 38 38 44 38 S31 Attenuation , in GPS L1 Band (1573.3 – 1577.5 MHz) dB 38 38 43 38 S31 Attenuation, Wideband GPS (1577.5 – 1585.4 MHz) dB 35 35 41 35 S31 Attenuation, GLONASS (1597.6 – 1605.9 MHz) dB 35 35 38 35 Notes: 1. T C is the case temperature and is defined as the temperature of the underside of the duplexer where it makes contact with the circuit board. 2. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx port equal to or less than +29 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the average value of the parameter over the indicated band at the specified temperature. Typical values may vary over time. 4. Tx port includes matching to 50 Ω as shown in Figure 1. 5. Integrated Insertion Loss over any 3.84 MHz channel within the band.

Ant, Rx Z0 = 50 Ω, Tx port includes matching to 50 Ω as shown in Figure 1. Symbol Parameter Units S31 Attenuation, 1605.9 – 1680.0 MHz dB 26 26 36 26 S31 Attenuation in Receive Band (1805 – 1880 MHz) dB 45 45 58 45 S31 Attenuation, Band 1 Rx (2110 – 2170 MHz) dB 30 30 35 30 S31 Attenuation, ISM Band (2400 – 2500 MHz) dB 28 28 30 28 S31 Attenuation, Band 7 Rx (2620 – 2690 MHz) dB 28 28 30 28 S31 Attenuation in Tx 2nd Harmonic Band (3420 – 3570 MHz) dB 25 25 36 25 S31 Attenuation in Tx 3rd Harmonic Band (5130 – 5355 MHz) dB 10 10 33 10 S31 Attenuation, 5725 – 5850 MHz dB 10 10 23 10 S31 Attenuation in Tx 4th Harmonic Band (6840 – 7140 MHz) dB 10 10 18 10 S11 Return Loss (SWR) of Tx Port [4] in Tx Band (1710 – 1785 MHz) S33 Return Loss (SWR) of Ant Port [4] in Tx Band (1710 – 1785 MHz) Isolation, Transmit Port to Receive Port S21 Tx-Rx Isolation [5] in Receive Band (1807.4 – 1877.6 MHz) dB 50 50 61 50 S21 Tx-Rx Isolation in Transmit Band [4] (1710 – 1785 MHz) dB 55 55 64 55 Notes: 1. T C is the case temperature and is defined as the temperature of the underside of the duplexer where it makes contact with the circuit board. 2. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx port equal to or less than +29 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the average value of the parameter over the indicated band at the specified temperature. Typical values may vary over time. 4. Tx port includes matching to 50 Ω as shown in Figure 1. 5. Integrated Insertion Loss over any 3.84 MHz channel within the band.

  1. Operation in excess of any one of these conditions may result in permanent damage to the device.
  2. The device will function over the recommended range without degradation in reliability or permanent change in performance, but is not

guaranteed to meet electrical specifications.

  1. T C is defined as case temperature, the temperature of the underside of the duplexer where it makes contact with the circuit board.

Figure 1. Tx Matching cally has an output impedance lower than 50 Ω. imizing the severity of the duplexer-PA interstage match. lar PA, circuit board, and performance requirements. suitable for RF applications at this frequency.

Figure 18. Package Outline Drawing Figure 20. Product Marking and Pin Orientation Figure 19. Pad Detail

  1. Dimensions in millimeters
  2. Tolerance: X.XX ± 0.05 mm
  3. Dimensions nominal unless otherwise noted
  4. Contact areas are gold plated

6 Ant

8 Gnd

0.15 X 45°

Figure 26. Recommended Solder Stencil, mm (top view) Figure 27. Recommended Solder Mask, mm (top view)

Figure 30. SMT Reel Drawing

  1. Reel shall be labeled with the following
  2. A certi/f_icate of compliance (c of c) shall
  3. Reel must not be made with or contain
  4. All dimensions in millimeters (mm)

Figure 31. Verified SMT Solder Profile

6 February 2003

Ordering Information

Part Number No. of Devices Container ACMD-6103-BLK 100 Tape Strip or Anti-static Bag ACMD-6103-TR1 3000 178 mm (7-inch) Reel

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-4217EN - July 5, 2013 Appendix A – Package Marking Cross Reference Marking “W” Work Week Marking “W” (cont) Work Week (cont) 1 1 S 27 2 2 T 28 3 3 U 29 4 4 V 30 5 5 W 31 6 6 X 32 7 7 Y 33 8 8 Z 34 9 9 a 35 A 10 b 36 B 11 c 37 C 12 d 38 D 13 e 39 E 14 f 40 F 15 g 41 G 16 m 42 H 17 n 43 J 18 q 44 K 19 r 45 L 20 t 46 M 21 < 47 N 22 > 48 O 23 / 49 P 24 \\ 50 Q 25 ( 51 R 26 ) 52