HSMX-A46X-XXXXX AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

  • Industry standard PLCC-4
  • High reliability LED package
  • High brightness using AlInGaP dice technologies
  • High optical efficiency
  • Narrow Viewing angle at 50°
  • Available in 8mm carrier tape on 7-inch reel

Applications

  • Interior automotive – Instrument panel backlighting – Central console backlighting – Cabin backlighting – Navigation and audio system – Dome lighting – Push button backlighting
  • Exterior automotive – Turn signals – CHMSL – Rear combination lamp – Side repeaters
  • Office automation, home appliances, industrial equipment – Front panel backlighting – Push button backlighting – Display backlighting

1 Cathode

2 Anode

3 Cathode

4 Cathode

Table 1. Device Selection Guide

  1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not
  2. All Dimensions in millimeters.
  3. Terminal Finish: Ag plating
  4. Electrical connection between all cathode is recommended

Figure 1. Package Drawing

Table 2. Absolute Maximum Ratings (TA = 25 °C)

  1. Derate Linearly as shown in Figure 6.
  2. Duty Factor = 10%, Frequency = 1kHz

Table 3. Optical Characteristics (TA = 25 °C)

  1. The dominant wavelength, lD, is derived from the CIE Chromaticity diagram and represents the color of the device.
  2. q½ is the off-axis angle where the luminous intensity is ½ the peak intensity.
  3. Radiant intensity, Ie in watts / steradian, may be calculated from the equation Ie = IV / hV, where IV is the luminous intensity in candelas and

hV is the luminous efficacy in lumens / watt.

  1. FV is the total luminous flux output as measured with an integrating sphere after the device has stabilized.
  2. Flux tested at mono pulse conditions.

Table 4. Electrical Characteristics (TA = 25 °C)

AN5305 Handling of Moisture Sensitive Surface Mount Devices for details.

  • It is not recommended to open the MBB prior to assembly (e.g. for IQC).
  • The humidity indicator card (HIC) shall be read immediately upon opening of MBB.

curing or rework need to be completed within 672 hours.

  • For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH.
  • “10%” or “15%” HIC indicator turns pink.
  • The LEDs are exposed to condition of >30°C / 60% RH at any time.
  • The LEDs floor life exceeded 672 hours.

Recommended baking condition: 60±5°C for 20 hours. Figure 15. Reeling Orientation.

Intensity Bin Select (X5X6) Individual reel will contain parts from one half bin only X5 Min IV Bin

0 Full Distribution

2 2 half bins starting from X51 3 3 half bins starting from X51 4 4 half bins starting from X51 5 5 half bins starting from X51 6 2 half bins starting from X52 7 3 half bins starting from X52 8 4 half bins starting from X52 9 5 half bins starting from X52 Intensity Bin Limits Bin ID Min. (mcd) Max. (mcd) U1 450.00 560.00 U2 560.00 715.00 V1 715.00 900.00 V2 900.00 1125.00 W1 1125.00 1400.00 W2 1400.00 1800.00 X1 1800.00 2240.00 X2 2240.00 2850.00 Y1 2850.00 3550.00 Y2 3550.00 4500.00 Z1 4500.00 5600.00 Z2 5600.00 7150.00 11 7150.00 9000.00 12 9000.00 11250.00 21 11250.00 14000.00 22 14000.00 18000.00 Tolerance of each bin limit = ± 12% Color Bin Select (X7) Individual reel will contain parts from one full bin only. Q A, B and C only P B, C and D only N C, D and E only M D, E and F only

1 A, B, C and D only

3 B, C, D and E only

4 C, D, E and F only

5 A, B, C, D and E only

6 B, C, D, E, and F only

Amber Min. (nm) Max. (nm) A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Orange Min. (nm) Max. (nm) A 597.0 600.0 B 600.0 603.0 C 603.0 606.0 D 606.0 609.0 E 609.0 612.0 Red Min. (nm) Max. (nm) Full Distribution 620.0 635.0 Tolerance of each bin limit = ±1nm

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV02-0529EN - June 26, 2007 Packaging Option (X8 X9) Option Test Current Package Type Reel Size M1 50mA Top Mount 7 VF Bin Limits Bin ID Min. Max. VA 1.9 2.2 VB 2.2 2.5 VC 2.5 2.8 VD 2.8 3.1 VE 3.1 3.4 Tolerance of each bin limit = ±0.1V