DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

/g120 High brightness AlInGaP material /g120 Small size with extremely low profile /g120 0603 industry standard footprint with 0.35mm height /g120 Diffused optics /g120 Operating range of -40 /g113C to 85/g113C /g120 Available in 4 colors /g120 Compatible with IR soldering /g120 Available in 8 mm conductive tape on 7” diameter reel /g120 Reel sealed in zip locked moisture barrier bags

Applications

/g120 Membrane switch indicator /g120 LCD backlighting /g120 Push button backlighting /g120 Front panel indicator /g120 Symbol backlighting /g120 Keypad backlighting

Part Number Color Die Technology Parts per Reel Package Description HSMA-C130 Amber AlInGaP 4000 Untinted, Diffused HSMC-C130 Red AlInGaP 4000 Untinted, Diffused HSME-C130 Yellow Green AlInGaP 4000 Untinted, Diffused HSML-C130 Orange AlInGaP 4000 Untinted, Diffused NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 1.6 (0.063 ) 0.12 (0.005) 0.3 ± 0.15 (0.012 ± 0.006) 0.23 (0.009) CATHODE MARK 0.35 (0.014) 0.3 ± 0.15 (0.012 ± 0.006) 1.15 (0.045) LED DIE DIFFUSED EPOXY PCB BOARD SOLDERING TERMINAL 0.8 (0.031) CATHODE LINE 0.7 (0.028) MIN. POLARITY (0.80)

Absolute Maximum Ratings at TA = 25 /g113C Parameter AlInGaP Units DC Forward Current [1] 20 mA Power Dissipation 48 mW Reverse Voltage (IR = 100/g80A) 5V LED Junction Temperature 95 °C Operating Temperature Range -40 to +85/g3/g113C Storage Temperature Range -40 to +85 /g113C Soldering Temperature See reflow soldering profile (Figure 5 & 6) Notes: 1. Derate linearly as shown in Figure 4. Electrical Characteristics at T A = 25°C Part Number Forward Voltage VF (Volts) @ IF = 20mA Reverse Breakdown VR (Volts) @ IR = 100/g80A Thermal Resistance R/g84JP (/g113C/W) Typical Typ. Max. Min. HSMA-C130 2.05 2.40 5 500 HSMC-C130 1.94 2.40 5 500 HSME-C130 1.94 2.40 5 500 HSML-C130 1.94 2.40 5 500 Optical Characteristics at T A = 25°C Part Number Luminous Intensity IV [1] (mcd) @ 20mA Peak Wavelength /g79peak (nm) Typical Color, Dominant Wavelength /g79d [2] (nm) Typical Viewing Angle 2 /g841/2 [3] (Degrees) TypicalMin. Typ. HSMA-C130 28.5 87.0 591 589 110 HSMC-C130 28.5 131.0 635 626 110 HSME-C130 18.0 54.0 575 573 110 HSML-C130 28.5 139.0 612 606 110 Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechani cal axis of the LED package. 2. The dominant wavelength, /g79d are derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. /g791/2 is the off-axis angle where the luminous intensity is ½ the peak intensity.

AlInGaP Red Color Bin Limits Bin ID Dominant Wavelength (nm) Minimum Maximum - 620.0 635.0 Tolerance : ± 1nm AlInGaP Yellow Green Color Bin Limits Bin ID Dominant Wavelength (nm) Minimum Maximum A 561.5 564.5 B 564.5 567.5 C 567.5 570.5 D 570.5 573.5 E 573.5 576.5 Tolerance : ± 1nm AlInGaP Orange Color Bin Limits Bin ID Dominant Wavelength (nm) Minimum Maximum A 597.0 600.0 B 600.0 603.0 C 603.0 606.0 D 606.0 609.0 E 609.0 612.0 F 612.0 615.0 Tolerance : ± 1nm Notes: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins. Light Intensity (IV) Bin Limits Bin ID Intensity (mcd) Minimum Maximum M 18.00 28.50 N 28.50 45.00 P 45.00 71.50 Q 71.50 112.50 R 112.50 180.00 Tolerance : ±15% Notes: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins. Forward Voltage Limits Bin ID Forward Voltage (V) Minimum Maximum 1 1.60 1.80 2 1.80 2.00 3 2.00 2.20 4 2.20 2.40 Tolerance : ± 0.1V AlInGaP Amber Color Bin Limits Bin ID Dominant Wavelength (nm) Minimum Maximum A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Tolerance : ±1nm

  1. Humidity Indicator Card is > 10% when read at 23 ±
  2. Device expose to factory conditions <30°C/60%RH

Figure 12. Tape leader and trailer dimensions Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved.