HSDL-7000 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Compliant with IrDA physical layer specs
  • Interfaces with IrDA compliant SIR (115Kbps) transceiver
  • 1 Micron CMOS gate array
  • Used in conjunction with standard 16550 UART

Applications

Interfaces with SIR infrared transceivers to perform:

  • Serial half-duplex data transfer between: Notebook computers Subnotebooks Desktops PCs PDAs Printers Other peripheral devices
  • Telecom applications in: Modems Fax machines Pagers Phones
  • Industrial applications in: Data collection devices
  • Medical applications in: Patient and pharmaceutical data collection HSDL-7000 IR 3/16 Encode/Decode IC Data Sheet

triggered input clock that is set to 16 times the data transmission baud rate. The encode and decode schemes require this signal. The signal is usually tied to a UART’s BAUDOUT signal. TXD - Negative edge triggered input signal; usually tied to a UART’s SOUT signal (serial data to be transmitted). RCV - Output signal which is usually tied to a UART ’s SIN signal (received serial data). GND - Chip ground. NRST - Active low signal used to reset the decode state machine. This signal can be tied to POR (Power on reset) or V CC. This signal can also be used to disable any data reception. IR_RCV - A 3/16th pulse width input signal from the infrared transceiver. The signal is a demodulated (pulse stretched) to generate the RCV output signal. IR_TXD - This signal is the modulated 3/16ths TXD signal which is input to the infrared transceiver. V CC - Power. Package Dimensions 7.7 ± 0.3 (0.30 ± 0.012) 0.15 + 0.10/-0.00 SEE DETAIL A 5.60 (0.22) 6.65 (0.26) MAX. 0.40 + 0.10/-0.00 1.55 (0.06) 1.42 (0.056) MAX. 1.27 (0.05) 0.6 ± 0.2 (0.024 ± 0.008) DETAIL A, SCALE 20 0.10 (0.004) 1.05 (0.041) NOTE: DIMENSIONS IN MILLIMETERS (INCHES).

16 X CLOCK

16 CLOCK CYCLES

The encoder sends a pulse for every space or “0” that is sent on the TXD line. On a high to low transition of the TXD line, the generation of the pulse is delayed for 7 clock cycles of the 16XCLK before the pulse is set high for 3 clock cycles (or 3/16th of a bit time) and then subsequently pulled low. A high to low transition of the IR_RXD line from the infrared transceiver module signifies a 3/ 16th pulse. This pulse is stretched to accommodate 1 bit time (16 clock cycles). Every pulse that is received is translated into a “0” or space on the RXD line equal to 1 bit time. Note: The stretched pulse must be at least 3/4 of a bit time in duration to be correctly interpreted by a UART. IR_RXD RXD 3 cs

(VCC = 0 Volts, TA= -40 to +85°C) Parameter Symbol Min. Typ. Max. Units Conditions Input Capacitance C IN 10 20 pF f = 1 MHz - Unmeasured Pins Output Capacitance C OUT 10 20 pF Output Fall Time 10 20 pF Returned to 0 Volts Absolute Maximum Ratings Parameter Symbol Min. Max. Units Conditions Storage Temperature T S -65 +150 °C Operating Temperature T A -40 +85 °C Output Current I O 10 mA Power Dissipation P MAX 0.22 W Input/Output Voltage V I/VO -0.5 V CC + 0.5 V Power Supply Voltage V CC -0.5 +6.5 V Switching Specifications (VCC = 5 Volts ± 10%, TA= -40 to +85°C) Parameter Symbol Min. Typ. Max. Units Conditions Toggle Frequency f tog 120 Mhz Propagation Delay Time t pd 0.5 ns Internal Gate 1.0 ns Input Buffer 2.0 ns Output Buffer Output Fall Time t f 1.42 ns Output Buffer (C L = 15 pF) Output Rise Time t r 1.54 ns Output Buffer (C L = 15 pF) Note: ftog represents the maximum internal D-Type Flip Flop toggle rate

SIR Transceivers HSDL-7000 RCV IR_TXD IR_RCV SOUT BAUDOUT TXD 16XCLK RCV UART 16550 SIN Recommended Operating Conditions (TA= -40 to +85°C) Parameter Symbol Min. Typ. Max. Units Conditions Supply Voltage V CC 2.7 5.0 5.5 V CMOS level Input Voltage V I 0.0 V CC V CMOS level Ambient Temperature T A -40 +85 °C CMOS level High Level Input Voltage V IH 0.7 VCC VCC V CMOS level Low Level Input Voltage V IL 0.0 0.3 V CC V CMOS level Positive Trigger Voltage V P 1.61 4.00 V CMOS level Negative Trigger Voltage V N 0.55 3.10 V CMOS level Hysteresis Voltage V H 0.50 2.00 V CMOS level Power Dissipation P DISS 4.9 220 mW f 16XCLK = 2 MHz Input Rise Time t ri 200 ns f 16XCLK = 2 MHz Input Fall Time t fa 200 ns f 16XCLK = 2 MHz Max Clk Frequency (16XCLK) f 16XCLK 2 MHz Minimum Pulse Width (IR_TXD)* t mpx 250 ns f 16XCLK = 2 MHz *IrDA Parameters. The Max Clk Frequency represents the maximum clock frequency to drive the HSDL-7000 ’s internal state machine. Under normal circumstances, this clock input should not exceed 16 * 115.2 Kbp/s or 1.8432 MHz. This product can operate at high er clock rates, but the above is the recommended rate. The Minimum Pulse Width represents the minimum pulse width of the encoded IR_TXD pulse (and the IR_RCV pulse). As per the IrDA specifications, the minimum pulse width of the IR_TXD and IR_RCV pulses should be 3 * (1/1.8432 MHz) or 1.63 µs. The minimum pulse width specified for the HSDL-7000 is 250 ns, which is within IrDA specification. Under normal circumstances, the pulse wi dth should not be less than 1.63 µs. Application Circuits HSDL-7000 Connection to UART At the time of this publication, Light Emitting Diodes (LEDs) that are contained in this product are regulated for eye safety in Europe by the Commission for European Electrotechnical Standardization (CENELEC) EN60825-1. Please refer to Application Brief I-008 for more information.

For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries . Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5964-9278E 5988-4569EN November 4, 2006