DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Rectangular light emitting surface
- Excellent for flush mounting on panels
- Long life: solid state reliability
- Excellent uniformity of light output
Description
The HLMA-SH05 is an epoxy encapsulated lamp in rectangular package which are easily stacked in arrays or used for discrete front panel indi cators. Contrast and light uniformity are enhanced by a special epoxy diffusion and tinting process. Technology This 2x5 rectangular solid state lamp utilizes the newly developed Aluminum Indium Gallium Phosphide (AlInGaP) LED technology. This material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. 5.18 (0.204) 4.93 (0.194) 5.46 (0.215) 4.95 (0.195) 26.40 (1.00) MIN. 8.00 (0.315) 7.37 (0.290) 1.27 (0.060) NOMINAL 2.41 (0.095) 1.98 (0.078) SIDE VIEW BOTTOM VIEW 0.46 (0.018) SQ. NOMINAL 2.54 (0.100) NOMINAL CATHODE LEAD NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS. 3. THERE IS A MAXIMUM 1° TAPER FROM BASE TO THE TOP OF LAMP. HLMA-SXD5 pkg dimen
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. AV02-1553EN - September 25, 2008 Optical Characteristics at TA = 25°C Part Number HLMA- Luminous Intensity IV (mcd) @ 20 mA Peak Wavelength lpeak (nm) Typ. Color, Dominant Wavelength ld[1] (nm) Typ. Viewing Angle 2q1/2 Degrees[2] Typ. Luminous Efficacy hv (lm/w) Min. Typ. SH05 8 20 621 615 110 263 Notes: 1. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. q1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Electrical Characteristics at TA = 25°C Part Number HLMA- Forward Voltage VF (Volts) @ IF = 20 mA Reverse Breakdown VR (Volts) @ IR = 100 μA Capacitance C (pF) VF = 0, f = 1 MHz Typ. Thermal Resistance RqJ-PIN (°C/W) Speed of Response ts (ns) Time Constant e-t/ts SH05 1.9 2.4 5 20 40 260 13 Figure 6. NORMALIZED INTENSITY 1.0 ANGULAR DISPLACEMENT – DEGREES 0.8 0.6 0.5 0.7 0.2 100°90° 0.1 0.3 0.4 0.9 HLMA-SXD5 fig 6