HLMA-PG00-N0011 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • Surface mount lead configurations
  • Right angle lead bend for through hole mounting
  • Tape and reel in accordance with ANSI/EIA RS-481 specifications Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps Data Sheet

Code Package Configuration Drawing 11 Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, Surface Mount A, H, K, L

1500 Parts per Reel[1]

12 Gull Wing Lead, Bulk Packaging, Quantity of 500 Parts[2]

14 Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel,

6000 Parts per Reel[1]

21 Yoke Leads, 12 mm Tape on 7 in. Dia. Reel B, I, K, L

22 Yoke Leads, Bulk Packaging, Quantity of 500 Parts[2]

24 Yoke Leads, 12 mm Tape on 13 in. Dia. Reel, 31 Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel C, J, K, L

32 Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts[2]

34 Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel, 1S Short Leads; 3.7 mm (0.145 in.) E 2S Short Leads; 3.7 mm (0.145 in.) G Notes: 1. SMT lamps are supplied in 12 mm embossed carrier tape. Minimum order is for one full reel, either 7 inch or 13 inch. All other order quantities must be in reel increments only. Orders for partial reels are not accepted. 2. Vapor barrier bags are used for bulk packaging. Center Lead Spacing Center Lead Spacing Lead Configurations Bends for Through Hole Mounting

(B) “Yoke” Lead, Options 21, 22, and 24 Package Dimensions, Lead Bend Options (A) Gull Wing Lead, Option 11, 12, and 14 Pkg B) Lamp – Yoke Lead ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) CATHODE STRIPE 7.62 (0.300) MAX. 0.79 (0.031) 0.53 (0.021) 0.13 (0.005) TYP. CATHODE ANODE 3.45 (0.136) NOM. 1.07 (0.042) TYP. Pkg A) Lamp – Gull Wing Lead ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) CATHODE STRIPE 0.13 (0.005) MAX. 0.79 (0.031) 0.53 (0.021) 3.81 (0.150) MAX. CATHODE ANODE

(C) Z-Bend Lead, Option 31, 32, and 34 (D) Rt. Angle Bend Option 1L Pkg C) Lamp – Z-Bend ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) CATHODE STRIPE 0.79 (0.031) 0.53 (0.021) 4.06 (0.160) 4.57 (0.180) 0.76 (0.030) 0.51 (0.020) 5.59 (0.220) 6.10 (0.240) 3.05 (0.120) NOM. CATHODE ANODE Pkg D) Lamp – Rt Angle 1L ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) CATHODE STRIPE 10.16 (0.400) 10.67 (0.420) 2.54 (0.100) NOM.

(E) Rt. Angle Bend Option 1S Pkg E) Lamp – Rt Angle 1S ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) CATHODE STRIPE 3.43 (0.135) 3.94 (0.155) 2.54 (0.100) NOM.

(F) Rt. Angle Bend Option 2L (G) Rt. Angle Bend Option 2S Pkg F) Lamp – Rt Angle 2L ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) CATHODE STRIPE 9.50 (0.374) 8.92 (0.351) 5.08 (0.200) NOM. Pkg G) Lamp – Rt Angle 2S ALL DIMENSIONS ARE IN MILLIMETERS (INCHES) CATHODE STRIPE 3.43 (0.135) 3.94 (0.155) 5.08 (0.200) NOM.

Package Dimensions: Surface Mount Tape and Reel Options (H) 12 mm Tape and Reel, Gull Wing Lead PUSH PIN HOLE, GULL WING LEAD, DOME ONLY NOTES: 1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE. 2. MINIMUM LEADER LENGTH AT EITHER END OF THE T APE IS 500 mm. 3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO. 4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE CA THODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.

(I) 12 mm Tape and Reel, “Yoke” Lead NOTES: 1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE. 2. MINIMUM LEADER LENGTH AT EITHER END OF THE T APE IS 500 mm. 3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO. 4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE CA THODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.

(J) 12 mm Tape and Reel, Z-Bend Lead Embossed Carrier All Dimensions Tape Dimensions Are in Millimeters Per ANSI/EIA (Inches). Standard RS-481. Yoke and Gull Wing Dome Gull Wing Flat Top Yoke Dome Z-Bend Dome Z-Bend Flat Top (0.059 + 0.010) F Reel Dimensions All Dimensions Per ANSI/EIA Are in Millimeters Standard RS-481. (Inches). 7 inch Reel 13 Inch Reel

Storage Condition: 5 to 30˚C @ 60% RH max. Baking is required under the following conditions: a) Humidity Indicator Card is >10% when read at 23 ± 5°C. b) The pack has been opened for more than 1 week. Baking recommended condition: 60 ± 5˚C for 20 hours. (K) 12 mm Tape and Reel PART: LOT NO: CUST PART: CAT: QTY: BIN: D/C: QA INSP. TAPE DATE: C/O:

For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. Obsoletes 5989-1206EN AV02-0069EN - September 2, 2008 (L) Recommended Reflow Soldering Profile and Soldering Pad Pattern for SMT Options Recommended SnPb reflow soldering profile. Wait until device has cooled to room temperature before handling. Recommended soldering pad pattern for gull wing leads 11, 12, and 14. Recommended soldering pad pattern for yoke leads 21, 22, and 24. Recommended soldering pad pattern for Z-bend leads 31, 32, and 34. 3.30 (0.130) 6.60 (0.260) 0.64 (0.025) 1.27 (0.50) 0.45 (0.018) 0.89 (0.035) #27 DRILL 3.73 (0.147) DIA. CLEARANCE HOLE THROUGH PC BOARD DIMENSIONS ARE IN MILLIMETERS (INCHES) 3.30 (0.130) 6.60 (0.260) 1.27 (0.50) 0.45 (0.018) 0.89 (0.035) #27 DRILL 3.73 (0.147) DIA. CLEARANCE HOLE THROUGH PC BOARD DIMENSIONS ARE IN MILLIMETERS (INCHES) 0.89 (0.035) 1.78 (0.070) 3.58 (0.140) 0.45 (0.018) 0.45 (0.018) 0.89 (0.035) 230 10 SEC. MAX. 2-3°C/SEC. 120 SEC. MAX. TIME TEMPERATURE 183°C 125-170°C 3-4°C/SEC. 60-150 SEC. 3°C/SEC. MAX. 25°C 50°C °C MAX.+5 Recommended Pb-free reflow soldering profile. 217 °C 200 °C 60 - 120 SEC. 6 °C/SEC. MAX. 3 °C/SEC. MAX. 3 °C/SEC. MAX. 150 °C 255 - 260 °C 100 SEC. MAX. (Acc. to J-STD-020C) 10 - 30 SEC. TIME TEMPERATURE