DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

/g120 0.56” digit height /g120 Low current operation /g120 Excellent characters appearance /g120 Available in CA and CC /g120 500 pieces per reel /g120 Moisture sensitivity level: Level 3 /g120 RoHS compliant

Ordering Information

Red Green Yellow Orange Description HDSM-541C HDSM-541H HDSM-541F HDSM-541L Common Anode, Right Hand Decimal HDSM-543C HDSM-543H HDSM-543F HDSM-543L Common Cathode, Right Hand Decimal Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance are 0.25 mm (0.01”) unless otherwise noted.

Pin Connection (Common Anode) PIN No Connection

1 CATHODE G

2 CATHODE DP

3 CATHODE A

4 CATHODE F

5 COMMON ANODE DIG2

6 CATHODE D

7 CATHODE E

8 CATHODE C

9 CATHODE B

10 COMMON ANODE DIG1

Internal Circuit Diagram (Common Anode) A B C D E F GD P DIG1 : 10 DIG2 : 5 3 98 6 7 4 1 2 A B C D E F GD P /g3/g3 Pin Connection (Common Cathode) PIN No Connection

1 ANODE G

2 ANODE DP

3 ANODE A

4 ANODE F

5 COMMON CATHODE DIG2

6 ANODE D

7 ANODE E

8 ANODE C

9 ANODE B

10 COMMON CATHODE DIG 1

Internal Circuit Diagram (Common Cathode) A B C D E F GD P DIG1 DIG2 3 986 7 4 1 2 A B C D E F GD P /g3/g3 Absolute Maximum Ratings @ TA=25° Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linearly From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C

Electrical / Optical Characteristics @ T A=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 5.4 10.5 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 572/571 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 20 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Yellow Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 20 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 591/589 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 15 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Red Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 16.0 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 632/624 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 20 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.0 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Orange Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 19.5 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 611/605 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 17 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA

Pb free reflow soldering Profile Recommended soldering pattern (unit : mm) 245°C TIME TEMPERATURE 6°C/SEC. MAX. 100 SEC. MAX.60 - 120 SEC. 3°C/SEC. MAX. 3°C/SEC. MAX. 10 - 30 SEC. 150°C 200°C 217°C (Acc. to J-STD-020C) 2.54 x 4 = 10.16 Recommended stencil window opening is 80% Intensity Bin Limits (mcd) Green IV Bin Category Min . Max M 5.401 8.600 N 8.601 13.700 P 13.701 21.800 Q 21.801 34.700 Tolerance: ±15% Yellow / Red / Orange IV Bin Category Min . Max N 8.601 13.700 P 13.701 21.800 Q 21.801 34.700 R 34.701 55.200 Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. Notes: 1. The peak temperature refers to the peak package body temperature. 2. Number of reflow process shall be limited to maximum 2 times only. Cooling process to normal temperature is required between first and second soldering process.

Tape specification (unit : mm) 2.4 ± 0.14 ± 0.1 1.75 ± 0.1 40.4 ± 0.1 20.2 ± 0.1 4.0 0.35 44 +0.300 −0.100 Ø1.5 +0.1−0.0 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0983EN - March 17, 2011