DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

/g120 0.56” digit height /g120 Low current operation /g120 Excellent characters appearance /g120 Available in CA and CC /g120 1000 pieces per reel /g120 Moisture Sensitivity Level: Level 3 /g120 RoHS compliant Package Dimensions

Ordering Information

Red Green Yellow Orange Description HDSM-531C HDSM-531H HDSM-531F HDSM-531L Common Anode, Right Hand Decimal HDSM-533C HDSM-533H HDSM-533F HDSM-533L Common Cathode, Right Hand Decimal Notes: All dimensions are in millimeters (inches). Tolerance: ± 0.25mm (0.01”) unless otherwise noted.

Pin Connection (Common Anode) PIN No Connection

1 Cathode E

2 Cathode D

3 Common Anode

4 Cathode C

5 Cathode DP

6 Cathode B

7 Cathode A

8 Common Anode

9 Cathode F

10 Cathode G

Internal Circuit Diagram (Common Anode) /g26 /g25/g23 /g21 /g20/g28 /g20/g19 /g24 /g22/g17/g27 /g36 /g37/g38 /g39 /g40/g41 /g42/g39 /g51 Pin Connection (Common Cathode) PIN No Connection

1 Anode E

2 Anode D

3 Common Cathode

4 Anode C

5 Anode DP

6 Anode B

7 Anode A

8 Common Cathode

9 Anode F

10 Anode G

Internal Circuit Diagram (Common Cathode) /g26 /g25/g23 /g21 /g20/g28 /g20/g19 /g24 /g22/g17/g27 /g36 /g37/g38 /g39/g40/g41 /g42/g39 /g51 Absolute Maximum Ratings @ TA=25° Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linearly From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C

Electrical / Optical Characteristics @ T A=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 5.4 10.5 - Mcd I F = 10mA Emissions Wavelength /g79p//g79d - 572/571 - Nm I F = 20mA Spectral Line Half-Width /g39/g79 -2 0 - N m I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Yellow Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 20 - Mcd I F = 10mA Emissions Wavelength /g79p//g79d - 591/589 - Nm I F = 20mA Spectral Line Half-Width /g39/g79 -1 5 - N m I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Red Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 16 - Mcd I F = 10mA Emissions Wavelength /g79p//g79d - 632/624 - Nm I F = 20mA Spectral Line Half-Width /g39/g79 -2 0 - N m I F = 20mA Forward Voltage, Per Segment V F - 2.0 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Orange Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 8.6 19.5 - Mcd I F = 10mA Emissions Wavelength /g79p//g79d - 611/605 - Nm I F = 20mA Spectral Line Half-Width /g39/g79 -1 7 - N m I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA

Intensity Bin Limits (mcd) Green IV Bin Category Min. Max M 5.401 8.600 N 8.601 13.700 P 13.701 21.800 Q 21.801 34.700 Tolerance: ±15% SMT Soldering Profile Pb free reflow soldering Profile Yellow / Red / Orange IV Bin Category Min. Max N 8.601 13.700 P 13.701 21.800 Q 21.801 34.700 R 34.701 55.200 Tolerance: ±15% Recommended soldering pattern (unit: mm) 245°C TIME TEMPERATURE 6°C/SEC. MAX. 100 SEC. MAX.60 - 120 SEC. 3°C/SEC. MAX. 3°C/SEC. MAX. 10 - 30 SEC. 150°C 200°C 217°C (Acc. to J-STD-020C) 1.8 2.45 x 4 = 9.8 Recommended stencil window opening is 80%Notes: 1. The peak temperature refers to the peak package body tempera- ture. 2. Number of reflow process shall be limited to maximum 2 times only. Cooling process to normal temperature is required between first and second soldering process. Note: 1. Bin categories are established for classification of products. Prod- ucts may not be available in all categories. Please contact your Avago representative for information on currently available bins.

Tape specification (unit: mm) 16 ± 0.1 4 ± 0.1 1.75 ± 0.1 28.4 ± 0.1 14.2 ± 0.1 4.0 0.35 32 +0.30 −0.10 Ø1.5 +0.10−0.00 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0713EN - March 17, 2011