HDSM-431X AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • 0.39” digit height
  • Low current operation
  • Excellent characters appearance
  • Available in CA and CC
  • 1000 pieces per reel
  • Moisture Sensitivity Level: Level 3
  • RoHS compliant Package Dimensions

Ordering Information

Red Green Yellow Orange Description HDSM-431C HDSM-431H HDSM-431F HDSM-431L Common Anode, Right Hand Decimal HDSM-433C HDSM-433H HDSM-433F HDSM-433L Common Cathode, Right Hand Decimal Note: 1. All dimensions are in millimeters. 2. Tolerance are +/- 0.25mm unless otherwise specified.

Pin Connection (Common Anode) PIN No Connection

1 Cathode E

2 Cathode D

3 Common Anode

4 Cathode C

5 Cathode DP

6 Cathode B

7 Cathode A

8 Common Anode

9 Cathode F

10 Cathode G

Internal Circuit Diagram (Common Anode) 7 6 4 2 1 9 10 5 3.8 A B C D E F G DP Pin Connection (Common Cathode) PIN No Connection

1 Anode E

2 Anode D

3 Common Cathode

4 Anode C

5 Anode DP

6 Anode B

7 Anode A

8 Common Cathode

9 Anode F

10 Anode G

Internal Circuit Diagram (Common Cathode) 7 6 4 2 1 9 10 5 3.8 A B C D E F G DP Absolute Maximum Ratings @ TA=25° Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment (1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linearly From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C

Electrical / Optical Characteristics @ T A=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 5.4 9 - Mcd IF = 10mA Emissions Wavelength lp/ld - 572/571 - Nm IF = 20mA Spectral Line Half-Width Dl - 20 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Yellow Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 15 - Mcd IF = 10mA Emissions Wavelength lp/ld - 591/589 - Nm IF = 20mA Spectral Line Half-Width Dl - 15 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Red Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 14.3 - Mcd IF = 10mA Emissions Wavelength lp/ld - 644/630 - Nm IF = 20mA Spectral Line Half-Width Dl - 20 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.0 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Orange Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 16 - Mcd IF = 10mA Emissions Wavelength lp/ld - 611/605 - Nm IF = 20mA Spectral Line Half-Width Dl - 17 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 mA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA

Intensity Bin Limits (mcd) Green IV Bin Category Min. Max. M 5.401 8.6 N 8.601 13.7 P 13.701 21.8 Tolerance: ±15% Yellow IV Bin Category Min. Max. N 8.601 13.7 P 13.701 21.80 Q 21.801 34.7 Tolerance: ±15% SMT Soldering Profile Pb free reflow soldering Profile Red IV Bin Category Min. Max. N 8.601 13.7 P 13.701 21.80 Q 21.801 34.7 Tolerance: ±15% Orange IV Bin Category Min. Max. N 8.601 13.7 P 13.701 21.80 Q 21.801 34.7 R 34.701 55.2 Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. Recommended soldering pattern (unit: mm) 2.6 1.9 x 4 = 7.6 12.8 1.4 Recommended stencil window opening is 80% 245°C TIME TEMPERATURE 6°C/SEC. MAX. 100 SEC. MAX.60 - 120 SEC. 3°C/SEC. MAX. 3°C/SEC. MAX. 10 - 30 SEC. 150°C 200°C 217°C (Acc. to J-STD-020C) Notes: 1. The peak temperature refers to the peak package body temperature. 2. Number of reflow process shall be limited to maximum 2 times only. Cooling process to normal temperature is required between first and second soldering process.

Tape specification (unit: mm) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved. AV02-0708EN - December 2, 2014