DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

/g120 0.28” digit height /g120 Low current operation /g120 Excellent characters appearance /g120 Available in CA and CC /g120 1000 pieces per reel /g120 Moisture sensitivity level: Level 3 /g120 RoHS compliant

Ordering Information

Red Green Yellow Orange Description HDSM-291C HDSM-291H HDSM-291F HDSM-291L Common Anode, Upper and Lower Decimal HDSM-293C HDSM-293H HDSM-293F HDSM-293L Common Cathode, Upper and Lower Decimal Notes: All dimensions are in millimeters (inches). Tolerance: ± 0.25mm (0.01”) unless otherwise noted.

Pin Connection (Common Anode) PIN No Connection

1 CATHODE G

2 CATHODE DP2,DP4

3 CATHODE A

4 CATHODE F

5 COMMON ANODE DIG2

6 CATHODE D

7 CATHODE E

8 CATHODE C

9 CATHODE B

10 COMMON ANODE DIG1

11 CATHODE DP1,DP3

Internal Circuit Diagram (Common Anode) A B C D E F GD P 1 DP2 DIG1 DIG2 39 86 7 4 1 11 2 A B C D E F GD P 1 DP2 Pin Connection (Common Cathode) PIN No Connection

1 ANODE G

2 ANODE DP2,DP4

3 ANODE A

4 ANODE F

5 COMMON CATHODE DIG2

6 ANODE D

7 ANODE E

8 ANODE C

9 ANODE B

10 COMMON CATHODE DIG 1

11 ANODE DP1,DP3

Internal Circuit Diagram (Common Cathode) A B C D E F GD P 1 DP2 DIG1 DIG2 39 86 7 4 1 11 2 A B C D E F GD P 1 DP2 Absolute Maximum Ratings @ TA=25° Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linearly From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C

Electrical / Optical Characteristics @ T A=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 3.4 6 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 572/571 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 20 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Yellow Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 3.4 8.0 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 591/589 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 15 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Red Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 3.4 7.5 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 632/624 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 20 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.0 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Orange Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 3.4 8.5 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 611/605 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 20 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA

Intensity Bin Limits (mcd) Yellow / Red / Orange / Green IV Bin Category Min . Max L 3.401 5.400 M 5.401 8.600 N 8.601 13.700 P 13.701 21.800 Tolerance: ±15% Notes: 1. Bin categories are established for classification of products. Prod- ucts may not be available in all categories. Please contact your Avago representative for information on currently available bins. SMT Soldering Profile Pb free reflow soldering Profile Recommended soldering pattern (unit: mm) 250°C TIME TEMPERATURE 6°C/SEC. MAX. 100 SEC. MAX.60 - 120 SEC. 3°C/SEC. MAX. 3°C/SEC. MAX. 10 - 30 SEC. 150°C 200°C 217°C (Acc. to J-STD-020C) 2.54 x 5 = 12.7 Recommended stencil window opening is 80%Notes: 1. The peak temperature refers to the peak package body tempera- ture. 2. Number of reflow process shall be limited to maximum 2 times only. Cooling process to normal temperature is required between first and second soldering process.

Tape specification (unit: mm) 16.0 4.0 ± 0.1 1.75 ± 0.1 32.00 +0.30 −0.10 Ø2.0 4.0 ± 0.1 28.4 ± 0.1 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0981EN - March 17, 2011