DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

/g120 0.28” digit height /g120 Low current operation /g120 Excellent characters appearance /g120 Available in CA and CC /g120 1000 pieces per reel /g120 Moisture sensitivity level: Level 3 /g120 RoHS compliant

Ordering Information

Red Green Yellow Orange Description HDSM-281C HDSM-281H HDSM-281F HDSM-281L Common Anode, Upper and Lower Decimal HDSM-283C HDSM-283H HDSM-283F HDSM-283L Common Cathode, Upper and Lower Decimal Notes: All dimensions are in millimeters (inches). Tolerance: ± 0.25mm (0.01”) unless otherwise noted.

Pin Connection (Common Anode) PIN No Connection

1 CATHODE G

2 CATHODE DP1

3 CATHODE F

4 COMMON ANODE

5 CATHODE A

6 CATHODE B

7 CATHODE DP2

8 CATHODE C

9 COMMON ANODE

10 CATHODE D

11 CATHODE E

Internal Circuit Diagram (Common Anode) /g3 4,9 A B C D E F GD P 1 DP2 5 6 8 10 11 3 1 2 7 Pin Connection (Common Cathode) PIN No Connection

1 ANODE G

2 ANODE DP1

3 ANODE F

4 COMMON CATHODE

5 ANODE A

6 ANODE B

7 ANODE DP2

8 ANODE C

9 COMMON CATHODE

10 ANODE D

11 ANODE E

Internal Circuit Diagram (Common Cathode) 4,9 A B C D E F GD P 1 DP2 5 6 8 10 11 3 1 2 7 /g3 Absolute Maximum Ratings @ TA=25° Parameter Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linearly From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C

Electrical / Optical Characteristics @ T A=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 3.4 6 - mcd I F = 10mA Emissions Wavelength /g75p//g79d - 572/571 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 20 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Yellow Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 3.4 8.0 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 591/589 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 15 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Red Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 3.4 7.5 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 632/624 - mm I F = 20mA Spectral Line Half-Width /g39/g79 - 20 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.0 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA Orange Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity I V 3.4 8.5 - mcd I F = 10mA Emissions Wavelength /g79p//g79d - 611/605 - nm I F = 20mA Spectral Line Half-Width /g39/g79 - 20 - nm I F = 20mA Forward Voltage, Per Segment V F - 2.1 2.6 V I F = 20mA Reverse Current, Per Segment I R - 100 /g80A VR = 5V Luminous Intensity Matching Ratio I V-M - - 2:1 - I F = 10mA

Intensity Bin Limits (mcd) Yellow / Red / Orange / Green IV Bin Category Min . Max L 3.401 5.400 M 5.401 8.600 N 8.601 13.700 P 13.701 21.800 Tolerance: ±15% SMT Soldering Profile Pb free reflow soldering Profile Recommended soldering pattern (unit: mm) Notes: 1. Bin categories are established for classification of products. Prod- ucts may not be available in all categories. Please contact your Avago representative for information on currently available bins. 250°C TIME TEMPERATURE 6°C/SEC. MAX. 100 SEC. MAX.60 - 120 SEC. 3°C/SEC. MAX. 3°C/SEC. MAX. 10 - 30 SEC. 150°C 200°C 217°C (Acc. to J-STD-020C) 1.27 x 5 = 6.35 7.8 0.8 Recommended stencil window opening is 80%Notes: 1. The peak temperature refers to the peak package body tempera- ture. 2. Number of reflow process shall be limited to maximum 2 times only. Cooling process to normal temperature is required between first and second soldering process.

Tape specification (unit: mm) 12.00 ± 0.1 4.00 ± 0.1 1.75 ± 0.1 22.25 11.50 4.0 0.35 24.00 +0.30 −0.10 Ø1.5 +0.10 −0.00 Ø1.5 +0.10 −0.00 2.00 ± 0.1 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0980EN - March 17, 2011