HCS7HXB37C15

RCR7HYA17C160 VECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

Frequency from 0.5 MHz to 160 MHz Stability to ± 0.1 ppm 0 to 50˚C +5Vdc to +24Vdc supply voltage options Sinewave, HCMOS, TTL options Over 500,000 units produced

Applications

Base Stations and Picocells LMDS, WLL, SONET, Stratum 3

Description

The SATCOM and "1 ppm Forever" series of Temperature Compensated Crystal Oscillators (TCXO's) are available in frequencies from 0.5 MHz to 160 MHz. These series offer performance for short term stability, phase noise, G sensitivity, aging and temperature stability normally only associated with Oven Controlled Crystal Oscillators (OCXO's), while consuming typically < 20 mA. With over 500,000 units produced, Vec- tron International has more experience with this type of TCXO then the rest of the industry combined.

Performance Characteristics Parameter Output Options: AC = ACMOS 0.5 to 160 MHz HC = HCMOS 0.5 to 160 MHz TD = 10 TTL 0.5 to 160 MHz RG = 0 dBm 50 ohm 3.0 to 30 MHz RC = +7.0 dBm 50 ohm 3.0 to 90 MHz Stability Options: A17 = ± 0.1 ppm 0˚C to +50˚C B37 = ± 0.3 ppm 0˚C to +70˚C C57 = ± 0.5 ppm -20˚C to +70˚C D16 = ± 1.0 ppm -40˚C to +85˚C EA6 = ± 1.5 ppm -55˚C to +85˚C (Other stability options are available) Supply Voltage: AC = +12 Vdc ± 5% HC = +12 Vdc ± 5% TD = +12 Vdc ± 5% RG = +5 Vdc ± 5% RC = +12 Vdc ± 5% (Other voltage options are available) Allan Variance (typical): ± 1 x 10-10 at tau = 1 sec Aging (at 10MHz): "1 ppm Forever" < 0.2 ppm / 1 st year < 0.7 ppm / 10 years SATCOM < 0.5 ppm / 1st year < 2.0 ppm / 10 years Phase Noise (typical): -110 dBc / Hz @ 10 Hz offset -135 dBc / Hz @ 100 Hz offset -150 dBc / Hz @ 1 kHz offset -155 dbc / Hz @ 100 kHz offset

10 MHz, RC option

Typical P/N: (SATCOM) RCR7HYA17 C 10.00 MHz ("1 ppm Forever") RGR5HXB 37C 15.00 MHz HY is predetermined, HX is for "1 ppm Forever" max temp range -20 to +70 Note: Not all stabilities are available with all options. Vectron International does not recommend wave soldering, IR reflow or other elevated temperature processing without consulting the factory. For AC, HC and TD outputs with frequencies above 30 MHz a low phase noise PLL multiplier will be used. Please inform the factory of your phase noise requirements. Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON SATCOM / "1 ppm Forever" TCXO Characteristics

0.762 (.030) 38.887 (1.531) 38.887 (1.531) 25.4 (1.000) 12.70 (0.500) 5.842 (0.23) 13.462 (0.53)12.70 (0.50) 25.4 (1.000) 12.70 (0.500) 2 1 10.160 (0.400)6.350 (0.250) .508 (0.02) 20.320 (0.800) max min max max CL DIA. 5 PLACES R5 PACKAGE Frequency Adjust: Option Specification HY ± 3 ppm min. via external voltage, 0 to +5 Vdc HX NONE Pin Function

1 Output

3 Gnd, Case

4 Gnd / V tune

.508 (0.20) 2 1 1.270 (0.05) FREQUENCY ADJUST ACCESS 38.887 (1.531)max 25.4 (1.000) 12.70 (0.500) 10.160 (0.400)6.350 (0.250) 20.320 (0.800) 25.4 (1.000) 12.70 (0.500) 5.842 (0.23)min 38.887 (1.531)max 13.462 (0.53) .508 (0.02) max 0.762 (.030)DIA. 5 PLACES CL R7 PACKAGE mm (in.) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON SATCOM / "1 ppm Forever" TCXO Frequency Adjust: Option Specification HY & HX ± 3 ppm min. via internal mechanical adjust Pin Function

5.842 (0.23) LC 2.54 (0.10) FREQUENCY ADJUST ACCESS50.8 ± .762 (2.00 ± .03) .508 (0.02) 12.192 (0.48) 1.270 (0.05) 0.762 (.030)DIA. 5 PLACES 25.4 (1.000) 12.70 (0.500) 6.350 (0.250) 10.160 (0.400) 20.320 (0.800) 50.8 ± .762 (2.00 ± .03) 25.4 (1.000) 12.70 (0.500) S5 PACKAGE LC 19.812 (0.78) LC 25.4 (1.000) 12.70 (0.500) 25.4 (1.000) 12.70 (0.500) 6.350 (0.250) 10.160 (0.400) 20.320 (0.800) 50.8 ± .762 (2.00 ± .03) 0.762 (.030)DIA. 5 PLACES 5.842 (0.23) 50.8 ± .762 (2.00 ± .03) .508 (0.02) max S7 PACKAGE mm (in.) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON SATCOM / "1 ppm Forever" TCXO Frequency Adjust: Option Specification HY ± 3 ppm min. via external voltage, 0 to +5 Vdc HX NONE Pin Function Frequency Adjust: Option Specification HY & HX ± 3 ppm min. via internal mechanical adjust Pin Function 19.812 (0.78) max min min

Voh min. +4.5 Vdc +4.5 Vdc +2.4 Vdc Voh max. +0.5 Vdc +0.5 Vdc +0.5 Vdc Load (typical) 100 k ohm // 10 pF 100 k ohm // 10 pF 10 TTL Duty Cycle 50% ± 10% 50% ± 10% 50% ± 10% Rise and Fall 3 nS max. 5 nS max. 10 nS max. Output Option RG RC Output Sinewave Sinewave Level 0 dBm to +6 dBm +7.0 dBm to +13 dBm Load 50 ohm 50 ohm Harmonics / Sub -20 dBc max. -20 dBc max. Other Spurious -60 dBc max. -60 dBc max. Vdd Standard TTL (TD) 2465B TEK TEK P6137 PROBE OUTDUT .01µF .01µF Vdd 270Ω OUT Vdd .01µF C L 2465B TEK TEK P6137 PROBE DUT Standard CMOS (AC & HC) OUT Vdd .01µF 2465B TEK DUT 50Ω 50Ω COAX

50 Ohm Sinewave (RG & RC)

Test Loads: Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON SATCOM / "1 ppm Forever" TCXO RL

Specifying Temperature Stability: RC/R7/HY/A17/C A17 A = X = Temperature Range 1 = N1 = Stability Multiplier 7 = N2 = Stability Scale XN 1 N 2 Temp Range Stability Multiplier Stability Scale A = 0 to +50˚C B = 0 to +70˚C C = -20 to +70˚C D = -40 to +85˚C E = -55 to +85˚C N 1 = 1 to 9 and A,B & C 10 to the -N 2 power 5 = 10-5 = 10 ppm 6 = 10-6 = 1 ppm 7 = 10-7 = 0.1 ppm 8 = 10-8 = 0.01 ppm 1 = ± 1.0 2 = ± 2.0 3 = ± 3.0 4 = ± 4.0 5 = ± 5.0 6 = ± 6.0 7 = ± 7.0 8 = ± 8.0 9 = ± 9.0 A = ± 1.5 B = ± 2.5 C = ± 3.5 Examples: XN 1N 2 A17 B37 C57 D16 EA6 X , N1 x N 2 0 to +50˚C, ± 1 x 10-7 0 to +70˚C, ± 3 x 10-7 -20 to +70˚C, ± 5 x 10-7 -40 to +85˚C, ± 1 x 10-6 X , N1N 2 0 to +50˚C, ± 0.1 ppm 0 to +70˚C, ± 0.3 ppm -20 to +70˚C, ± 0.5 ppm -40 to +85˚C, ± 1.0 ppm -55 to +85˚C, ± 1.5 ppm Note: Temperature stabilities listed on the website are for the best possible stability in that series. Next to quantity, Frequency vs. Temperature is the highest cost multiplier. Please do not over specify temperature stability as we will 100% test units to your requirements. The temperature ranges listed above are industry standards. However, if for example your requirements were for -33 to +55˚C please let us know, by choosing -40 to +85˚C arbitrarily you will be paying more than is required. Custom stabilities are always welcome and recommended. We do not charge extra for custom temperature ranges or stabilities. Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON SATCOM / "1 ppm Forever" TCXO

For HY Option: RC R7 HY A17 C 10.000 MHz Frequency (0.5 to 160 MHz) Commercial Screening (Predetermined) Stability (See "Specifying Temperature Stability") HY - For SATCOM type applications Package Option (R5 , R7 , S5, S7) Output Option (AC , HC , TD , RG , RC ) For HX Option: RG R5 HX 15.000 MHzB37 C (max. temp. range -20 to +70˚C) Frequency (0.5 to 160 MHz) HX - For "1 ppm Forever" Package Option (R5 , R7 , S5, S7) Output Option (AC , HC , TD , RG , RC ) USA: Vectron International • 267 Lowell Road, Hudson, NH 03051 Visit Our Website at www.vectron.com For additional information please contact: Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON Tel: 49 (0) 3328 4784 17 • Fax: 49 (0) 3328 4784 30 www.vectron.com Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information SATCOM / "1 ppm Forever" TCXO Rev. A 042502, 081902 Stability (See "Specifying Temperature Stability") Commercial Screening (Predetermined)