HCPL-0370-500E AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

  • Standard (HCPL-0370/3700) and low input current (HCPL-3760) versions
  • AC or DC input
  • Programmable sense voltage
  • Hysteresis
  • Logic compatible output
  • Thresholds guaranteed over temperature
  • Thresholds independent of LED optical parameters
  • Recognized under UL 1577 and CSA approved for dielectric withstand proof test voltage of 3750 Vac, 1 minute

Applications

  • Limit switch sensing
  • Low voltage detector
  • AC mains and DC link voltage detection
  • Relay contact monitor
  • Relay coil voltage monitor
  • Current sensing
  • Microprocessor interfacing Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. HCPL-3700 Functional Diagram AC DC+ DC- AC VCC VO GND TRUTH TABLE (POSITIVE LOGIC) INPUT H L OUTPUT L H NC

The HCPL-0370/3700’s input buffer IC has a nominal turn on threshold of 2.5 mA (ITH +) and 3.7 volts (VTH +). The buffer IC for the HCPL-3760 was redesigned to permit a lower input current. The nominal turn on threshold for the HCPL-3760 is 1.2 mA (ITH +) and 3.7 volts (VTH +). The high gain output stage features an open collector output providing both TTL compatible saturation voltages and CMOS compatible break down voltages. By combining several unique functions in a single package, the user is provided with an ideal component for indus - trial control computer input boards and other applications where a pre deter mined input threshold level is desirable. To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-3760-500E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with and RoHS compliant. Example 2: HCPL-3700 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and RoHS compliant will use ‘–XXXE. ’

Ordering Information

HCPL-0370/HCPL-3700/HCPL-3760 is UL Recognized with 3750 Vrms for 1 minute per UL1577 unless otherwise specified. Part number Option Package Surface Mount Gull Wing Tape & Reel UL 5000 Vrms/1 Minute IEC/EN/DIN EN 60747-5-5 Quantity RoHS Compliant Non-RoHS Compliant HCPL- 0370 -000E No option SO-8 X 100 per tube -500E -500 X X 1500 per reel -060E NA X X 100 per tube -560E NA X X X 1500 per reel HCPL- 3700 -000E No option 300 mil DIP-8 50 per tube -300E #300 X X 50 per tube -500E #500 X X X 1000 per reel -020E -020 X 50 per tube -320E -320 X X X 50 per tube -520E -520 X X X X 1000 per reel -060E NA X 50 per tube -360E NA X X X 50 per tube -560E NA X X X X 1000 per reel HCPL- 3760 -000E No option 300 mil DIP-8 50 per tube -300E #300 X X 50 per tube -500E #500 X X X 1000 per reel -060E NA X 50 per tube -360E NA X X X 50 per tube -560E NA X X X X 1000 per reel Note: NA = Not available.

Standard DIP Package (HCPL-3700/3760) 9.40 (0.370) 9.90 (0.390) A XXXX YYWW DATE CODE 0.76 (0.030) 1.40 (0.056) 2.28 (0.090) 2.80 (0.110) 0.51 (0.020) MIN. 0.65 (0.025) MAX. 4.70 (0.185) MAX. 2.92 (0.115) MIN. DIMENSIONS IN MILLIMETERS AND (INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 5678 4321 0.20 (0.008) 6.60 (0.260) 5° TYP. 7.36 (0.290) 7.88 (0.310) 5AC AC DC+ DC- GND VCC NC VO PIN ONE TYPE NUMBER UL RECOGNITION UR 3.56 ± 0.13 (0.140 ± 0.005) Schematic

Package Outline Drawings, continued Gull Wing Surface Mount Option 300 (HCPL-3700/3760) XXX YWW 8 7 6 5 4321 5.994 ± 0.203 (0.236 ± 0.008) 3.937 ± 0.127 (0.155 ± 0.005) 0.406 ± 0.076 (0.050)BSC 5.080 ± 0.127 (0.200 ± 0.005) 3.175 ± 0.127 (0.060) 45° X 0.432 (0.017) 0.228 ± 0.025 (0.009 ± 0.001) TYPE NUMBER (LAST 3 DIGITS) DATE CODE 0.305 (0.012)MIN. TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH) DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX. NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX. 0.203 ± 0.102 (0.008 ± 0.004) PIN ONE 0 ~ 7° 7.49 (0.295) 1.9 (0.075) 0.64 (0.025) LAND PATTERN RECOMMENDATION 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. 0.20 (0.008) 0.33 (0.013) 9.65 ± 0.25 (0.380 ± 0.010) 0.635 ± 0.130 (0.025 ± 0.005) 7.62 ± 0.25 (0.300 ± 0.010) 5678 4321 9.65 ± 0.25 (0.380 ± 0.010) 6.350 ± 0.25 (0.250 ± 0.010) 1.080 ± 0.320 (0.043 ± 0.013) 1.780 (0.070) MAX.1.19 (0.047) MAX. 2.540 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). TOLERANCES (UNLESS OTHERWISE SPECIFIED): LEAD COPLANARITY MAXIMUM: 0.102 (0.004) NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. xx.xx = 0.01 xx.xxx = 0.005 A XXXX YYWW DATE CODE TYPE NUMBER UL RECOGNITION UR MOLDED 1.016 (0.040) 1.27 (0.050) 10.9 (0.430) 2.0 (0.080) LAND PATTERN RECOMMENDATION 3.56 ± 0.13 (0.140 ± 0.005) Small Outline SO-8 Package (HCPL-0370)

The HCPL-0370/3700/3760 has been approved by the following organizations: Solder Reflow Thermal Profile Recommended Pb-Free IR Profile Note: Non-halide flux should be used. Note: Non-halide flux should be used. 217 °C RAMP-DOWN 6 °C/SEC. MAX. RAMP-UP 3 °C/SEC. MAX. 150 - 200 °C 260 +0/-5 °C t 25 °C to PEAK 60 to 150 SEC. 15 SEC. TIME WITHIN 5 °C of ACTUAL PEAK TEMPERATURE tp ts PREHEAT 60 to 180 SEC. tL TL Tsmax Tsmin Tp TIME TEMPERATURE NOTES: THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200 °C, Tsmin = 150 °C IEC/EN/DIN EN 60747-5-5 (with option 060) Maximum Working Insulation Voltage VIORM = 567 Vpeak for HCPL-0370, and 630 Vpeak for HCPL3700/3760. Highest Allowable Overvoltage VIOTM = 6000 Vpeak for HCPL-0370/3700/3760. UL Recognized under UL 1577 , component recognition program, File E55361 (HCPL-0370 pending). CSA Approved under CSA Component Acceptance Notice #5, File CA 88324. TIME (SECONDS) TEMPERATURE (¡C) 200 100 50 150100 200 250 300 SEC. 50 SEC. SEC. 160¡C 140¡C 150¡C PEAK TEMP. 245¡C PEAK TEMP. 240¡C PEAK TEMP. 230¡C SOLDERING TIME 200¡C PREHEATING TIME 150¡C, 90 + 30 SEC. 2.5¡C ± 0.5¡C/SEC. 3¡C + 1¡C/Ð0.5¡C TIGHT TYPICAL LOOSEROOM TEMPERATURE PREHEATING RATE 3¡C + 1¡C/Ð0.5¡C/SEC. REFLOW HEATING RATE 2.5¡C ± 0.5¡C/SEC.

Insulation and Safety Related Specifications Parameter Symbol 8-Pin DIP (300 mil) Value SO-8 Value Units Conditions Min.. External Air Gap (External Clearance) L(IO1) 7.1 4.9 mm Measured from input terminals to output terminals, hortest distance through air Min.. External Tracking Path (External Creepage) L(IO2) 7.4 4.8 mm Measured from input terminals to output terminals, shortest distance path along body Min.. Internal Plastic Gap (Internal Clearance) 0.08 0.08 mm Through insulation distance, conductor to conductor, usually the direct distance between the photoemitter and photodetector inside the optocoupler cavity Tracking Resistance (Comparative Tracking Index) CTI 200 200 V DIN IEC 112/VDE 0303 PART 1 Isolation Group IIIa Material Group (DIN VDE 0110, 1/89, Table 1) IEC/EN/DIN EN 60747-5-5 Insulation Related Characteristics [1] (with option 060) Description Symbol HCPL-0370 HCPL-3700/3760 Units Installation classification per DIN VDE 0110/1.89, Table 1 for rated mains voltage ≤ 150 V rms for rated mains voltage ≤ 300 V rms for rated mains voltage ≤ 600 V rms I-IV I-IV I-III I-IV I-IV I-III Climatic Classification 55/85/21 55/85/21 Pollution Degree (DIN VDE 0110/1.89) 2 2 Maximum Working Insulation Voltage VIORM 567 630 V peak Input to Output Test Voltage, Method b VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec Partial Discharge < 5 pC VPR 1063 1181 V peak Input to Output Test Voltage, Method a VIORM x 1.6 = VPR, Type and sample test, tm = 10 sec, Partial Discharge < 5 pC VPR 907 1008 V peak Highest Allowable Overvoltage (Transient Overvoltage, tini = 60 sec) VIOTM 6000 6000 V peak Safety Limiting Values (Maximum values allowed in the event of a failure) Case Temperature Input Current [2] Output Power [2] TS IS,INPUT PS,OUTPUT 150 150 600 175 230 600 mA mW Insulation Resistance at TS, VIO = 500 V RS 109 109 W Notes: 1. Insulation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits within the application. 2. Safety-limiting parameters are dependent on case temperature. The Input Current, IS,INPUT, derates linearly above 25°C free-air case temperature at a rate of 1.2 mA/°C and 1.53 mA/°C for HCPL-0370 and HCPL-3700/3760 respectively; the Output Power, PS,OUTPUT, derates linearly above 25°C free-air case temperature at a rate of 4.8 mW/°C and 4 mW/°C for HCPL-0370 and HCPL-3700/3760 respectively.

Recommended Operating Conditions Parameter Symbol Min. Max. Units Note Supply Voltage VCC 2 18 V Operating Temperature TA 0 70 °C Operating Frequency f 0 4 kHz 8 Absolute Maximum Ratings (No derating required up to 70°C) Parameter Symbol Min. Max. Units Note Storage Temperature TS -55 125 °C Operating Temperature TA -40 85 °C Lead Soldering Cycle Temperature 260 °C 1 Time 10 s Input Current Average 50 2 Surge IIN 140 mA 2, 3 Transient 500 Input Voltage (Pins 2-3) VIN -0.5 V Input Power Dissipation HCPL-3700/3760 PIN 230 mW 4 HCPL-0370 172 Total Package Power Dissipation HCPL-3700/3760 PT 305 mW 5 HCPL-0370 275 Output Power Dissipation HCPL-3700/3760 PO 210 mW 6 HCPL-0370 103 Output Current Average IO 30 mA 7 Supply Voltage (Pins 8-5) VCC -0.5 20 V Output Voltage (Pins 6-5) VO -0.5 20 V Solder Reflow Temperature Profile See Package Outline Drawings section

Over Recommended Temperature TA = 0°C to 70°C, Unless Otherwise Specified. Input Threshold Current ITH+ HCPL-0370/3700 1.96 2.5 3.11 mA VIN = VTH+; VCC = 4.5 V; VO = 0.4 V; IO ≥ 4.2 mA 2, 3 14 HCPL-3760 0.87 1.2 1.56 ITH- HCPL-0370/3700 1.00 1.3 1.62 VIN = VTH-; VCC = 4.5 V; VO = 2.4 V; IOH ≤ 100 µAHCPL-3760 0.43 0.6 0.80 Input Threshold Voltage DC (Pins 2, 3) VTH+ 3.35 3.7 4.05 V VIN = V2 - V3; Pins 1 & 4 Open VCC = 4.5 V; VO = 0.4 V; IO ≥ 4.2 mA VTH- 2.01 2.6 2.86 V VIN = V2 - V3; Pins 1 & 4 Open VCC = 4.5 V; VO = 2.4 V; IO ≤ 100 µA AC (Pins 1, 4) VTH+ 4.23 4.9 5.50 V VIN = |V1 - V4|; Pins 2 & 3 Open VCC = 4.5 V; VO = 0.4 V; IO ≥ 4.2 mA 14, 15 VTH- 2.87 3.7 4.20 V VIN = |V1 - V4|; Pins 2 & 3 Open VCC = 4.5 V; VO = 2.4 V; IO ≤ 100 µA Hysteresis IHYS HCPL-0370/3700 1.2 mA IHYS = ITH+ – ITH- 2 HCPL-3760 0.6 VHYS 1.2 V VHYS = VTH+ – VTH- Input Clamp Voltage VIHC1 5.4 6.0 6.6 V VIHC1 = V2 - V3; V3 = GND; IIN = 10 mA; Pins 1 & 4 Connected to Pin 3 VIHC2 6.1 6.7 7.3 V VIHC2 = |V1 - V4|; |IIN| = 10 mA; Pins 2 & 3 Open VIHC3 12.0 13.4 V VIHC3 = V2 - V3; V3 = GND; IIN = 15 mA; Pins 1 & 4 Open VILC -0.76 V VILC = V2 - V3; V3 = GND; IIN = -10 mA Input Current IIN HCPL-0370/3700 3.0 3.7 4.4 mA VIN = V2 – V3 = 5.0 V Pins 1 & 4 Open HCPL-3760 1.5 1.8 2.2 Bridge Diode Forward Voltage VD1,2 HCPL-0370/3700 0.59 V IIN = 3 mA HCPL-3760 0.51 IIN = 1.5 mA VD3,4 HCPL-0370/3700 0.74 IIN = 3 mA HCPL-3760 0.71 IIN = 1.5 mA Logic Low Output Voltage VOL 0.1 0.4 V VCC = 4.5 V; IOL = 4.2 mA 5 14 Logic High Output Current IOH 100 µA VOH = VCC = 18 V 14 Logic Low Supply Current ICCL HCPL-0370/3700 1.2 4 mA V2 – V3 = 5.0 V; VO = Open; 6 HCPL-3760 0.7 3 VCC = 5.0 V Logic High Supply Current ICCH 0.002 4 µA VCC = 18 V; VO = Open 4 14 Input Capacitance CIN 50 pF f = 1 MHz; VIN = 0 V, Pins 2 & 3, Pins 1 & 4 Open

Propagation Delay HCPL-0370/3700 4.0 Time to Logic Low tPHL 15.0 µs RL = 4.7 kW, CL = 30 pF 10 at Output HCPL-3760 4.5 7, 10 Propagation Delay HCPL-0370/3700 10.0 Time to Logic High tPLH 40.0 µs RL = 4.7 kW, CL = 30 pF 11 at Output HCPL-3760 8.0 HCPL-0370/3700 20 Output Rise Time tr µs RL = 4.7 kW, CL = 30 pF (10-90%) HCPL-3760 14 8 HCPL-0370/3700 0.3 Output Fall Time tf µs RL = 4.7 kW, CL = 30 pF Common Mode IIN = 0 mA, RL = 4.7 kW, Transient Immunity |CMH| 4000 V/µs VO min = 2.0 V, VCM = 1400 V at Logic High Output 9, 11 12, 13 Common Mode HCPL-0370/3700 IIN = 3.11 mA RL = 4.7 kW, Transient Immunity |CML| 600 V/µs VO max = 0.8 V, at Logic Low Output HCPL-3760 IIN = 1.56 mA VCM = 140 V Switching Specifications TA = 25°C, VCC = 5.0 V, Unless Otherwise Specified. Package Characteristics Over Recommended Temperature TA = 0°C to 70°C, Unless Otherwise Specified. Input-Output Momentary VISO 3750 V rms RH 50%, t = 1 min; 16, Withstand Voltage* TA = 25°C 17 Option 020 5000 18 Input-Output Resistance RI-O 1012 W VI-O = 500 Vdc 16 Input-Output Capacitance CI-O 0.6 pF f = 1 MHz; VI-O = 0 Vdc *The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous volt- age rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-5 Insulation Characteristics Table (if applicable), your equipment level safety specification, or Avago Application Note 1074, “Optocoupler Input-Output Endurance Voltage. ”

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. limiting input current during a transient condition. the contacts for clean ing purposes (wetting current). Figure 13. External threshold voltage level selection. determine external threshold levels.