H393P HSMC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Wide power supply voltage range
  • High sink current capability because of open collector otput 40mA min. Pin Configurations Pin 1 : Output A Pin 5 : + Input B Pin 2 : - Input A Pin 6 : - Input B Pin 3 : + Input A Pin 7 : Output B 5678 4321 Pin 4 : GND Pin 8 : Vcc Equivalent Circuit OUT -IN +IN Vcc

MICROELECTRONICS CORP. Spec. No. : Preliminary Data Issued Date : 2001.05.01 Revised Date : 2001.06.22 Page No. : 2/3 H393P HSMC Product Specification Absolute Maximum Ratings (see Note) Rating Symbol Value Unit Power Supply Voltage VCC 36 V Differential Input Voltage VID 36 V Common-Mode Input Voltage VI -5 to 36 V Output Short Current to GND - Infinite* - Power Dissipation PD 350 (Ta≤55°C) mW Operating Temperature Ta -20 to +75 °C Storage Temperature Tstg -55 to +125 °C *: This value is specified with respect to the short circuit from output to GND. However, short circuit from the output to VCC cause device destruction. Note: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Recommended Operating Conditions Rating Symbol Value Unit 2 to 30Power Supply Voltage VCC ±1.0 to ±15 V Operating Temperature Ta -20 to +75 °C Output Sink Current Isink ≤40 mA Electrical Characteristics (Vcc=5V, Ta=25°C) ValueParameter Symbol Conditions Min Typ Max Units Input Offset Voltage Vio Vo=VREF=1.4V - 2 5 mV Input Offset Current Iio - - 5 50 nA Input Bias Current Iin*1 - - 25 250 nA Common-Mode Input Voltage Vcm*2 - 0 - Vcc-1.5 V Power Supply Current Icc RL=∞ -2 3m A Voltage Gain Av RL=15kΩ , Vcc=15V - 200 - V/mV Response Time - RL=1kΩ -2 - u s Output Sink Current Isink Vin(+)=0, Vin(-)=1V, Vol≤1.5V 40 - - mA Output Saturation Voltage Vol Vin(+)=0, Vin(-)=1V, Isink≤30mA -0 . 20 . 4 V Output Leakage Current Ileak Vin (+)=1V, Vin(-)=0, Vo=30V - - 1 uA Notes: *1: Iin is measued when Vi≥0 and direction of the input current flows from IC. When negative voltage is applied to input pin, the pin is equivalently connected the GND through a 1kΩ of resistor. When low voltage below than –5V is applied, please connect a resistor serially to input pin in order to prevent the high current flow. *2: Positive input voltage may exceed the power supply voltage. As long as the other voltage remains in the common-mode input voltage range, the comparator will provide a proper output state. When Vcc=5V, your are requested to use Vin below 25V.

MICROELECTRONICS CORP. Spec. No. : Preliminary Data Issued Date : 2001.05.01 Revised Date : 2001.06.22 Page No. : 3/3 H393P HSMC Product Specification DIP-8P Dimension *:Typical G 0.1250 0.1400 3.17 3.55 α19 4 ° 97° 94° 97° Notes : 1.Dimension and tolerance based on our Spec. dated Sep. 07,1997. 2.Controlling dimension : millimeters. 3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 4.If there is any question with packing specification or packing method, please contact your local HSMC sales office. Material :

  • Lead : 42 Alloy ; solder plating
  • Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0 Important Notice :
  • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC.
  • HSMC reserves the right to make changes to its products without notice.
  • HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
  • HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory : Tel : 886-2-25212056 Fax : 886-2-25632712, 25368454 Tel : 886-3-5983621~5 Fax : 886-3-5982931 DIP-8P Plastic Package A B 8 7 65 4321 HI F G J K M L α1E D C Marking : Date Code PH 393