GLP-1A GWINSTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
E40E39 Made to Measure. Good Will Instrument Co., Ltd. GPG-2A (Logic Pulser) GLP-1A (Logic Probe Pulser) LOGIC PROBE & PULSER GLP-1A GPG-2A * For Troubleshooting or Testing Logic Circuits * Directly Injects a Signal into Logic Circuits without Removing Components * Sync Input for Producing Externally Synced Signals * Operating Voltage Range : 5 ~ 15VDC * Maximum input Probe Voltage : 35VDC * Maximum sync input Voltage : 120V/30sec * Sync Input Impedance : 1M * Pulse Repetition rate : 0.5/400Hz * Output Current : Pulser Mode,100mA Sink/Source * Square Wave, 5mA Sink/Source * Dimensions & Weight : 18(W) x 210(H) x 18(D)mm , Approx. 40g * Combining a Logic Probe and Pulser One Combined into * Probe for Troubleshooting Digital Circuits * Operating Voltage : 4VDC~18VDC * Maximum Input Signal Frequency: 50MHz * TTL : Logic "1">3.0V 0.25V, Logic"0"<0.75V 0.25V * CMOS : Logic "1">60%VCC 5%, Logic"0" <15% VCC 5% * Minimum Detectable Pulse Width 10nsec * Pulser : Sync Input Impedance 120k * Pulse Rate : Switchable 0.5/400Hz * Pulse width : 10 secretary * Dimensions & Weight : 18(W) x 210(H) x 18(D)mm, Approx. 50g +_+_ GPG-2A Logic Pulser GLP-1A Logic Probe & Pulser NOTE BASIC T & M INSTRUMENTS BASIC T & M INSTRUMENTS The GLP-1A/GPG-2A Series logic pulsers can be used to perform in-circuit testing of TTL, CMOS, and many other logic devices at a maximum of 50MHz. The GLP-1A is enhanced with a logic probe function with a minimum detectable pulse width of 10 ns, providing enough sensitivity for most applications. A Short 10 sec pulse width assures that no damage will occur to circuits whilst testing. With a weight less than 50g, a non-slip grip and an external sync input all provide comfort and reliability for various troubleshooting tasks. ORD ERIN G INFO RMATION ORD ERIN G INFO RMATION