GPCF TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Precision metal film technology Ohmic range 10R – 100K Precision to ±0.1% and 25ppm/°C Load life stability and humidity to 0.5% Dimensions (mm) & weight (mg) L W T max A C Wt nom 0402 0603 0805 1206 Power rating @70°C watts 0.063 0.1 0.125 0.25 Limiting element voltage volts 50 75 150 Resistance range ohms 10R – 100K Resistance tolerance % 0.1, 1 TCR (20 to 70°C) ppm/°C 25, 50 Values E24 & E96 preferred. Other values may be available by request. Insulation resistance (100V, 60s) ohms 1G min Voltage proof (60s) volts 300 500 Ambient temperature range °C -55 to 155 Construction A thin-film material is selectively deposited on a 96% alumina substrate together with metallic contacts at each end of the resistor. The unadjusted resistors are heat treated to give the required TCR and stability, then a precisely controlled laser trim process adjusts the resistance value. Epoxy protection is applied and wrap-around terminations are added and plated with nickel then tin. Each resistor is measured immediately before packing into tape. Terminations The chips are supplied with 100% Sn matte plated wrap-around terminations suitable for soldering. Solderability The terminations have an electroplated nickel barrier and tin coating. This ensures excellent ‘leach’ resistance properties and solderability. Marking The 0402 chips are not marked. 3 digit marking is used on the 0603 size and 4 digit marking on larger sizes and E96 values. Electrical Data Physical Data Resistors 06.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn All parts are Pb-free and comply with EU Directive 2011/65/EU amended by (EU) 2015/863 (RoHS3)All parts are Pb-free and comply with EU Directive 2011/65/EU amended by (EU) 2015/863 (RoHS3)
Test Conditions Maximum (+0.05R) Load life 1000 hours rated load @ 70°C ΔR% 0.5 Humidity 240 hours @ 40°C, 90%RH ΔR% 0.5 Short term overload Lesser of 2.5 x rated power & 2 x LEV, for 5s ΔR% 0.5 High temperature operation 96 hours at 155°C ΔR% 0.5 Temperature cycle 5 cycles -55°C to 155°C ΔR% 0.5 Resistance to solder heat 270°C for 10s ΔR% 0.25 Solderability 245°C for 2s 95% minimum coverage Performance Data Ordering Procedure Packaging GPCF Resistors are supplied paper taped and reeled as per IEC 286-3. Application Notes GPCF resistors are ideally suited for handling by automatic methods due to their rectangular shape and the small dimensional tolerances. Electrical connection to a ceramic substrate or to a printed circuit board can be made by reflow or wave soldering of wrap- around terminations. Wrap-around terminations provide good leach properties and ensure reliable contact. Due to the robust construction, the GPCF can be immersed in the solder bath for 30 seconds at 260°C. This enables the resistor to be mounted on one side of a printed circuit board and wire-leaded components applied on the other side. GPCF resistors themselves can operate at a maximum temperature of 155°C. For soldered resistors, the joint temperature should not exceed 110°C. This condition is met when the stated power levels at 70°C are used. GPCF0603-1K54BT5 (0603, 1.54 kilohms, ±0.1%, ±25ppm/°C, Pb-free) TCR Blank = ±25ppm/°C 02 = ±50ppm/°C F = ±1% 06.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn