GP30A NJSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- 0- High temperature metallurgically bonded construction
- *• Plastic material used carries Underwriters Laboratory Classification 94V-O
- *• Glass passivated cavity-free junction
- *• Capable of meeting environmental standards of MIL-S-19500
- *• 3.0 amperes operation at TA=55°C and with no thermal runaway
- 0- Typical IR less than 0.1 uA ^ High temperature soldering guaranteed: 350°C / 10 seconds, 0.375"(9.5mm) lead length, 5 Ibs. (2.3kg) tension Mechanical Data -fr Case: JEDEC DO-201AD molded plastic over glass body
- v- Lead: Plated axial leads, solderable per MIL-STD- 750, Method 2026
- (f Polarity: Color band denotes cathode end
- Cr Mounting position: Any *v* Weight: 0.048 ounce, 1 .28 grams DO-201AD .220 (S.6) .197(5.0) DIA. '—I .052(1.3) .048(1.2) ^ DIA. Dimensions in inches Maximum Ratings and Electrical Characteristics Rating at 25"C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at TA=55'C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @3.0A Maximum DC Reverse Current @ TA=25'u at Rated DC Blocking Voltage @ TA=150'C Maximum Full Load Reverse Current, Full Cycle Average .375"(9.5mm) Lead Length @TA=55"C Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Symbol VRRM VRMS VDC I(AV> IFSM VF IR HT|R Cj R0JA TJ.TSTG GP GP GP GP ( 30A 30B 30D 30G 3 50 100 200 400 6 35 70 140 280 4 50 100 200 400 6 3.0 ~~r .0(25.4) MINI. .375(9.5) B .335 (8.5) 1.0(25.4) MIN. ; and (millimeters) 3P GP IOJ 30K 00 800 20 560 00 800 GP 30M 1000 700 1000 125 1.2 5.0 100 100 40.0 -65 to + 175 Units V V V A A V uA uA uA PF t/w r Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Mount on Cu-Pad Size 16mm x 16mm on P.C.B. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors