GP10A GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage -50 to 1600 Volts Forward Current -1.0 Ampere
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.0 Ampere operation at T A=75°C and 55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AL molded plastic over glass body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS A B D G J K M N Q T V W Y UNITS Maximum repetitive peak reverse voltage V RRM 50 to 1600 Volts (SEE FIG. 5) Volts Maximum average forward rectified current 0.375" (9.5mm) lead length (SEE FIG. 1) I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) I FSM 30.0 25.0 Amps Maximum instantaneous forward voltage at 1.0A V F 1.1 1.2 1.3 Volts Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead lengths at TA=75°C IR(AV) 30.0 µA Maximum DC reverse current T A=25°C 5.0 at rated DC blocking voltage T A=125°C IR 50.0 µA Typical reverse recovery time(NOTE 1) trr 2.0 µs Typical junction capacitance(NOTE 2) C J 8.0 7.0 5.0 pF Typical thermal resistance(NOTE 3) R Θ JA 55.0 °C/W Operating junction and storage temperature range TJ, TSTG -65 to +175 -65 to +150 °C NOTES: (1) Reverse recovery test condition: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 0.107 (2.7) 0.080 (2.0) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 1.0 (25.4) MIN. 0.205 (5.2) 0.160 (4.1) DIA. NOTE: Lead diameter is for suffix "E" part numbers0.026 (0.66) 0.023 (0.58) DO-204AL Dimensions in inches and (millimeters) *Glass-plastic encapsulation is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 PATENTED*
5.0 1.1 1.5 1.6 0.1 0.01 20 40 60 140 160 180 1.0 0.8 0.6 0.4 0.2 80 100 120 0.1 1 10 100 0.1 1 10 100 1.0 100 0.001 0.01 0.1 02 0 4 0 6 0 8 0 RATINGS AND CHARACTERISTIC CURVES GP10A THRU GP10Y FIG. 1 - FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE, V RRM GP10W . . . .1500V FIG. 6 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE pF REVERSE VOLTAGE, VOLTS TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=75°C TJ=25°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE GP10A to GP10J GP10K to GP10Q GP10T to GP10Y TJ=25°C f=1.0 MHZ Vsig=50mVp-p 0.375" (9.5mm) LEAD LENGTH GP10A - GP10M GP10N - GP10Y TJ=125°C GP10A - GP10M GP10N - GP10Y 60 HZ RESISTIVE OR INDUCTIVE LOAD GP10A to GP10J GP10K to GP10Q GP10T to GP10Y