GP08A GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage -50 to 600 Volts Forward Current -0.8 Ampere
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 0.8 Ampere operation at T A=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AL molded plastic over glass body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GP08A GP08B GP08D GP08G GP08J UNITS Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 Volts Maximum RMS voltage V RMS 35 70 140 280 420 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA =55°C I(AV) 0 .8 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at T A=55°C IFSM 25.0 Amps Maximum instantaneous forward voltage at 0.8A V F 1.3 Volts Maximum full load reverse current full cycle average 0.375" (9.5mm) lead length at TA=55°C IR(AV) 30.0 µA Maximum DC reverse current T A=25°C 5.0 at rated DC blocking voltage T A=125°C IR 50.0 µA Typical reverse recovery time(NOTE 1) trr 2.0 µs Typical junction capacitance (NOTE 2) C J 8.0 pF Typical thermal resistance (NOTE 3) R Θ JA 55.0 °C/W Operating junction and storage temperature range T J, TSTG -65 to +175 °C NOTES: (1) Measure on IF =0.5A, IR =1.0A, Irr= 0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 0.107 (2.7) 0.080 (2.0) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 1.0 (25.4) MIN. 0.205 (5.2) 0.160 (4.1) DIA. NOTE: Lead diameter is for suffix "E" part numbers0.026 (0.66) 0.023 (0.58) DO-204AL Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306 PATENTED*
5.0 0.1 1 10 100 0.4 0.6 1.2 1.4 0.1 0.8 100 40 100 120 140 160 180 0.2 0.4 0.6 0.8 1.0 1.0 60 80 20 40 60 80 100 0.01 0.1 0.01 0.1 1 10 100 0.1 100 RATINGS AND CHARACTERISTIC CURVES GP08A THRU GP08J FIG. 1 - FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=100°C TJ=25°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE TJ=25°C f=1.0 MHZ Vsig=50mVp-p 0.375" (9.5mm) LEAD LENGTH
60 HZ RESISTIVE OR INDUCTIVE LOAD
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE ( °C/W) t, PULSE DURATION, sec