GP05US05 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Single & Dual Ouptuts PCB Mounting Eurocard Mounting Option DIN Rail Mounting Option Chassis Mounting Option International Safety Approvals Input Input Voltage • 85-264 VAC (110-370 VDC) Input Frequency • 47-440 Hz Inrush Current • 20 A typical at 100 VAC,
40 A typical at 200 VAC,
(cold start & full load) Output Hold Up Time • 10 ms at 85 VAC full load Output Voltage • See Table, ±5% initial tolerance Line Regulation • See Table Load Regulation • See Table Ripple & Noise • See Table Short Circuit & • Operates >105% of rating & Overload Protection recovers automatically General Temperature • 0.02%/°C typical Coefficient Switching Frequency • 250 kHz Efficiency • See Table Isolation • 3000 VAC 1 min, 500 VDC 50 Mohm Input to Output,
2000 VAC 1 min, 500 VDC 50 Mohm
Input to Case, FG
500 VAC 1 min, 500 VDC 50 Mohm
Output to Case, FG Environmental Operating • 0 °C to +55 °C, Temperature derate linearly to 80% at -10 °C to 25% at +70 °C for 85-132 VAC, & 45% at +65 °C for 133-264 VAC Humidity • 20-95% RH non-condensing Shock • 50 G for 11 ms, once on each X, Y & Z axis Vibration • 10-55 Hz at 10 G, 3 mins period 60 mins each along each along X, Y & Z axis EMC & Safety Safety Approvals • IEC950, EN60950, UL1950, VDE 0160, CSA 22.2 No.234 N.B. To comply with with CSA agency approval units are labelled with nominal AC input voltage & frequency EMC • FCC Curve B, VDE 0871 Curve B, & EN55022B conducted noise with addition of 0.1 µF ‘X’ capacitor fitted across AC input 5-10 Watts GP Series Universal AC Input Switchers Specification THE XP ERTS IN POWER www.xpplc.com sales@xpplc.com
- Measured low line to high line. 2. Measured no load to full load. Notes Mechanical Details www.xpplc.com sales@xpplc.com AC-DC Power SuppliesUniversal AC Input Switchers 5-10 Watts GP Series• Output Output Efficiency Regulation Ripple & Noise Model Voltage Current (T ypical @ 100 VAC) Line(1) Load(2) Pk-Pk Number 5 V 1.00 A 65% 20 mV 40 mV 80/120 mV GP05US05 12 V 0.45 A 67% 40 mV 100 mV 120/150 mV GP05US12 +12 V (24 V) 0.22 A 67% 60 mV 600 mV 120/150 mV GP05UD12 +15 V (30 V) 0.17 A 67% 75 mV 750 mV 120/150 mV GP05UD15 5 V 2.00 A 70% 20 mV 40 mV 80/120 mV GP10US05 12 V 0.90 A 72% 48 mV 100 mV 120/150 mV GP10US12 +12 V (24 V) 0.45 A 72% 60 mV 600 mV 120/150 mV GP10UD12 +15 V (30 V) 0.35 A 72% 75 mV 750 mV 120/150 mV GP10UD15 OUTPUT VOLTAGE & CURRENT RATINGS GP Weight: 75g max Dimension: Inches (mm) Tolerance: ±0.5 mm (1) Tolerance :±0.3 mm
5 W Models 10 W Models
The GP-BOARD is designed to accept any of the GP series models, in addition it can be supplied with a DIN HOUSING for mounting on DIN rails - both top hat and G types. Order GP-BOARD(S) for single output models and GP-BOARD(D) for dual output models. The GP-EUROCARD (3.94 (100) x 6.31 (160) is designed to accept any combination of two GP series models to provide dual, triple and quad outputs. In addition it can be supplied with a GP-E/CARD KIT which includes 6TE front panel and plastic cover for rear of pcb. Weight: 100g max Dimension: Inches (mm) Tolerance: ±0.5 mm (1) Tolerance :±0.3 mm 3.66 (93.0) 2.64 (67.0) Rev 2.0