DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Korean Facilities : 82-31-8069-3036/ rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 1 / 5 Version 0.1 Product Features Applications

  • 27~30GHz frequency range
  • 5W GaN HEMT MMIC
  • 25% Efficiency at Psat
  • up to 28V Supply voltage
  • 50ohm matched input/output
  • Die Size 3.4 x 1.6 x 0.1 mm
  • SATCOM Terminals
  • P oint to point radios
  • 5G System

Description

GM27030005D is a balanced two-stage monolithic GaN HEMT amplifier for SATCOM Terminals and Point to point digital radios, 5G System. This MMIC is fully matched to 50 ohms with integrated DC blocking capacitors on RF ports. This MMIC typically provides 17dB of Small signal gain and 37dBm of saturated output power, 25% of efficiency Electrical Specifications PARAMETER UNIT MIN TYP MAX CONDITION Frequency GHz 27 - 30 - Gain dB 15 17 - - Power Gain dB - 15 - CW Input Return Loss dB - -20 - - Output Return Loss dB - -20 - - Peak Output Power dBm - 37 - CW Efficiency % - 25 - CW DC Current mA - 500 - Vdd = 28.0V Note 1. Test conditions unless otherwise noted. T=25℃, Vdd=28V, 50Ω system Absolute Maximum Ratings PARAMETER UNIT MIN TYP MAX Drain Voltage VDC - - 35 Gate Voltage VDC -5.5 - 0 Operating Temperature ℃ -40 - +85 Storage Temperature ℃ -55 - +150 Mounting Temperature ℃ - - 300

Korean Facilities : 82-31-8069-3036/ rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 2 / 5 Version 0.1 Typical Performance @ VD1=VD2=28V, I D S =500mA, T=25℃, 50ohm System Frequency Pout (dBm), PAE (%), Gain (dB) Input Power (dBm) Pout (dBm) Pout (dBm) Input Power (dBm) Input Power (dBm) Pout (dBm) Pout (dBm) Input Power (dBm) PAE (%), Gain (dB) PAE (%), Gain (dB) PAE (%), Gain (dB) PAE (%), Gain (dB) Pout, PAE, Gain vs. Frequency Pout, PAE, Gain vs. Input Power Pout, PAE, Gain vs. Input Power Pout, PAE, Gain vs. Input Power Pout, PAE, Gain vs. Input Power

Korean Facilities : 82-31-8069-3036/ rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 3 / 5 Version 0.1 Block Diagram Die Dimensions (mm) DC Bond pad : 10 x 100 um VD2 Bond pad : 200 x 100 um RF Bond pad : 250 x 100 um

Korean Facilities : 82-31-8069-3036/ rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 4 / 5 Version 0.1 Assembly Diagram Ground is backside of die Recommended solder is AuSn(80/20) solder Evaluation board dimension 0.05mm GAP 0.7mil GOLD WIRE RF_IN RF_OUT VG1 VD1 VG2 VD2 VG1/2 VD1/2 NC NC

Korean Facilities : 82-31-8069-3036/ rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 5 / 5 Version 0.1

Revision History

Part Number Release Date Version Modification Data Sheet Status GM27030005D 2017.11.27 0.1 Initial Release Preliminary RFHIC Corporation reserves the right to make changes to any products herein or to discontinue any product at any time without notice. While product specifications have been thoroughly examined for reliability, RFHIC Corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. RFHIC Corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC Corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. Sales, inquiries and support should be directed to the local authorized geographic distributor for RFHIC Corporation. For customers in the US, please contact the US Sales Team at 919- 677-8780. For all other inquiries, please contact the International Sales Team at 82-31-8069-3036