GK001T SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Adoption of process GTBT (Grounded-Trench-MOS assisted Bipolar-mode Field Effect Transistor).
  • High breakdown voltage and high reliablity.
  • High speed switching.
  • Wide ASO.
  • Low saturation voltage, low On resistance : RCE (sat)=280mΩ (at 1A).
  • High hFE (typ : 1000). Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage V CBO 600 V Collector-to-Emitter Voltage V CES 600 V Emitter-to-Base Voltage V EBO 7V Collector Current I C 2A Collector Current (Pulse) I CP PW ≤300µs, Duty cycle≤10% 4 A Base Current I B 1A Collector Dissipation P C 0.8 W Tc=25°C2 2 W Junction Temperature Tj 150 °C Storage Temperature Tstg - -55 to +150 °C Electrical Characteristics at Ta=25°C RatingsParameter Symbol Conditions min typ max Unit Collector Cutoff Current I CBO VCB =500V, IE=0 10 µA Collector Cutoff Current I CES VCE =500V, RBE =0 10 µA Emitter Cutoff Current I EBO VEB =6V, IC =0 10 µA hFE 1V CE =5V, IC =50mA 500 1500 DC Current Gain h FE 2V CE =5V, IC =400mA 35 hFE 3V CE =5V, IC =1.2A 12 Output Capacitance Cob V CB =10V, f=1MHz 7.2 pF Collector-to-Emitter Saturation Voltage VCE (sat) I C =1A, IB=0.2A 280 560 mV Base-to-Emitter Saturation Voltage V BE (sat) I C =1A, IB=0.2A 1.1 1.5 V Continued on next page. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.

33004 TS IM TB-00000049

Switching Regulator Applications

No.7781-2/4 Continued from preceding page. RatingsParameter Symbol Conditions min typ max Unit Collector-to-Base Breakdown Voltage V (BR)CBO IC =100µA, IE=0 600 V Collector-to-Emitter Breakdown Voltage V(BR)CES IC =100µA, RBE =0 600 V Collector-to-Emitter Breakdown Voltage V(BR)CEO IC =1mA, RBE =∞ 200 V Turn-ON Time t on IC =1A, IB1=0.1A, IB2=- -0.45A, RL=200Ω 200 ns Storage Time t stg IC =1A, IB1=0.1A, IB2=- -0.45A, RL=200Ω 700 ns Fall Time t f IC =1A, IB1=0.1A, IB2=- -0.45A, RL=200Ω 70 ns Package Dimensions Package Dimensions unit : mm unit : mm 2045B 2044B Switching Time Test Circuit 1 : Base 2 : Collector 3 : Emitter 4 : Collector SANYO : TP 5.0 6.5 0.85 0.7 0.6 1.55.5 7.0 0.8 1.6 7.5 0.5 1.2 2.3 0.5 1 23 2.3 2.3 1 : Base 2 : Collector 3 : Emitter 4 : Collector SANYO : TP-FA 6.5 2.3 0.5 1.55.5 0.8 7.0 1.2 2.5 5.0 0.85 0.5 1.2 0 to 0.2 2.3 2.3 0.6 VR R B VCC =200VVBE = --5V + +50Ω INPUT OUTPUT R L 100µF 470 µF PW=20 µs IB1 D.C.≤1% IB2 Base-to-Emitter V oltage, VBE -- V Collector Current, IC -- A Collector-to-Emitter V oltage, VCE -- V Collector Current, IC -- A 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 IC -- VCE IT07034 IB =0 200mA 300mA IT07035 IC -- VBE 250mA 180mA 160mA 120mA 140mA 100mA 80mA 60mA 40mA 20mA 10mA 5mA 0.5 1.0 1.5 2.0 --40 Ta=120 V CE =5V

No.7781-3/4 IT07040 Forward Bias ASO 10 23 5 7 23 5 7 100 1000 0.1 1.0 IT07041 Reverse Bias ASO hFE -- IC IT07036 Cob -- VCB IT07039 VCE (sat) -- IC IT07037 VBE (sat) -- IC IT07038 0 20 40 60 80 100 120 140 160 0.1 0.4 0.2 0.3 0.5 0.6 0.7 0.8 0.9 IT07042 PC -- Ta Collector Current, IC -- A DC Current Gain, hFE Collector Current, IC -- A Collector-to-Emitter Saturation V oltage, VCE (sat) -- V Collector Current, IC -- A Collector Current, IC -- A Base-to-Emitter Saturation V oltage, VBE (sat) -- V Collector-to-Base V oltage, VCB -- V Collector-to-Emitter V oltage, VCE -- V Collector Current, IC -- A Collector-to-Emitter V oltage, VCE -- V Output Capacitance, Cob -- pF Collector Dissipation, PC -- W Ambient Temperature, Ta -- °C Tc=25°C IB2 = --0.4A L=500 µH, Single pulse 0 20 40 60 80 100 120 140 160 IT07043 PC -- Tc Collector Dissipation, PC -- W Case Temperature, Tc -- °C 1.0 23 5 7 23 5 7 10 32100 0.01 0.1 1.0 1.0 100 1000 10000 0.001 1.0 0.10.01 23572357235723 V CE =5V 0.1 23 5 7 23 5 7 23 5 71.0 100 10 100 1.0 f=1MHz Ta= --40°C 120°C 25°C 0.01 1.0 0.1 0.001 0.01 23 5 723 5 7 23 7 52 30.1 1.0 5 IC / IB =5 --40 °CTa=120 25°C 0.1 1.0 0.001 235 7235 7235 723 1.00.10.01 5 25°C Ta= --40°C 120°C 10msDC operation 1ms 500 µs PT=100 µs 100ms IC / IB =5 ICP =4A IC =2A Tc=25°C Single pulse

No.7781-4/4PS Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2004. Specifications and information herein are subject to change without notice.