GBPC12 GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

GBPC12, 15, 25 AND 35 SERIES GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Current Voltage - 12.0 to 35.0 Amperes

FEATURES

¤ The plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¤ This series is UL recognized under component index, file number E54214 ¤ Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation ¤ Universal 3-way terminals; snap-on, wire wrap-around, or P.C.B. mounting ¤ High forward surge current capabilities ¤ Glass passivated chip junctions ¤ Typical IR less than 0.3mA ¤ High temperature soldering guaranteed: 260°C/10 seconds at 5lbs. (2.3 kg) tension MECHANICAL DATA Case: Molded plastic with heatsink integrally mounted in the bridge encapsulation Terminals: Either plated 0.25" (6.35mm). Faston lugs or plated copper leads 0.040" Mounting Position:See NOTE 3 Polarity:Polarity symbols molded on body Mounting Torque:20 in. - lb. max. Weight:0.53 ounce, 15 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. GBPC12, 15, 25, 35 SYMBOLS 005 01 02 04 06 08 10 UNITS Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward GBPC12 12.0 rectified output current GBPC15 I(AV) 15.0 Amps (SEE FIG.1) GBPC25 25.0 GBPC35 35.0 Peak forward surge current single GBPC12 200.0 sine-wave superimposed on GBPC15 I FSM 300.0 Amps rated load (JEDEC Method) GBPC25 300.0 GBPC35 400.0 Rating (non-repetitive, for t GBPC12 160.0 greater than 1ms and less GBPC15 I2t 375.0 A2 secthan 8.3ms) for fusing GBPC25 375.0 GBPC35 660.0 Maximum instantaneous GBPC12 I F=6.0A forward voltage drop per GBPC15 IF=7.5A VF 1.1 Voltsleg at GBPC25 I F=12.5A GBPC35 I F=17.5A Maximum reverse DC current at rated TA=25°C 5.0 DC blocking voltage per leg T A=125°C IR 500.0 mA RMS isolation voltage from case to leads V ISO 2500.0 Volts Typical junction capacitance per leg (NOTE 1) C J 300.0 pF Typical thermal resistance per leg (NOTE 2) GBPC12-25 R Q JC 1.9 °C/WGBPC35 1.4 Operating junction storage temperature range T J, TSTG -55 to +150 °C NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to case per leg (3) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw GBPC - W W ire leads GBPC - Standard 7/28/98

0 25 50 75 100 125 150 175 200 0 1 02 03 04 05 06 07 08 09 0 1 0 0 0 10 20 30 40 1 10 100 100 500 RATINGS AND CHARACTERISTICS CURVES GBPC12, 15, 25 AND 35 SERIES FIG. 1 - MAXIMUM OUTPUT RECTIFIED CURRENT CASE TEMPERATURE, °C 5 x 6 x 4.9” AL. FINNED PLATE AVERAGE POWER DISSIPATION OF BRIDGE, WATTS FIG. 3 - MAXIMUM POWER DISSIPATION TJ=TJ max. BRIDGES MOUNTED on 9 x 3.5 x 4.6” (22.9 x 8.9 x 11.7cm) AL. FINNED PLATE AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM OUTPUT RECTIFIED CURRENT CAPACITIVE LOAD

60 Hz RESISTIVE

5 x 4 x 3” AL. FINNED PLATE 6.0 x 2.2 x 2.2” AL. FINNED PLATE GBPC12 GBPC15 GBPC25 AVERAGE FORWARD CURRENT, AMPERES AMBIENT TEMPERATURE, °C

60 HZ RESISTIVE OR

RthS-A=0.5 °C/W GBPC15 RthS-A=1.0 °C/W GBPC12 RthS-A=1.0 °C/W RthS-A=0.5 °C/W RESISTIVE OR INDUCTIVE LOAD AVERAGE OUTPUT CURRENT, AMPERES GBPC35 GBPC35 PEAK FORWARD SURGE CURRENT, AMPERES FIG. 4 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG GBPC12 GBPC15 GBPC25 GBPC35 NUMBER OF CYCLES AT 60Hz TJ=TJ max. 0.5Single Sine-Wave (JEDEC Method)

1.0 CYCLE

0.01 0.1 100 0.01 0.1 1 10 100 0.1 100 1 10 100 100 600 0 20 40 60 80 100 0.01 0.1 100 RATINGS AND CHARACTERISTICS CURVES GBPC12, 15, 25 AND 35 SERIES FIG. 5 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=25°C PULSE WIDTH=300 ms 1% DUTY CYCLE PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=25°C TJ=125°C TJ=150°C REVERSE VOLTAGE, VOLTS FIG. 7 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION , CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p t, HEATING TIME, sec. FIG. 8 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG TRANSIENT THERMAL IMPEDANCE, °C/W TJ=25°C f=1.0 MHz Vsig=50mVp-p 50-400V 600-1000V

1.135 (28.8) 1.115 (28.3) 0.672 (17.1) 0.632 (16.1) 0.732 (18.6) 0.692 (17.6) 0.094 (2.4) DIA. 0.034 (0.86) 0.030 (0.76) 0.25 (6.35) AC 0.840 (21.3) 0.740 (18.8) 0.582 (14.8) 0.542 (13.8) 0.672 (17.1) 0.632 (16.1) 1.135 (28.8) 1.115 (28.3) Hole for #10 Screw 0.220 (5.59) 0.200 (5.08)DIA. 0.310 (7.62) 0.290 (7.36) 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) 0.470 (11.9) 0.430 (10.9) 0.042 (1.07) 0.038 (0.97) DIA. 0.310 (7.62) 0.290 (7.36) 1.25 (31.8) MIN. 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) Hole for #10 Screw 0.220 (5.59) 0.200 (5.08)DIA. 0.24 (6.0) 0.18 (4.6) 0.50 (12.7) 0.18 (4.6) GBPCFIG. 9 Dimensions in inches and (millimeters) NOTES: (1) Corrosion resistant terminals designed with 0.25” female quick connectors for wrap or snap-on (2) A thin film of silicone thermal compound is recommended between the bridge case and mounting surface for improved thermal conduction GBPC-WFIG. 10