GBP5W IVO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Encoder multiturn / CANopen – Optical sensing – Resolution: singleturn 18 bit, multiturn 14 bit – Clamping flange or synchro flange – High resistance to shock and vibrations – LED status display – CANopen Profile CIA DSP 406 – Permanent check of code continuity – Technical data - electrical ratings Voltage supply 10...30 VDC Reverse polarity protection Yes Consumption w/o load ≤50 mA (24 VDC) Initializing time (typ.) 250 ms after power on Interface CANopen Transmission rate 10...1000 kBaud Profile conformity CANopen CIA DSP 406 V 3.0 Operating mode Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) Identifier 11 bit Steps per turn 262144 / 18 bit Number of turns 16384 / 14 bit Absolute accuracy ±0.01° Sensing method Optical Code Binary Code sequence CW/CCW programmable Output circuit CAN bus standard ISO / DIS 11898 Interference immunity DIN EN 61000-6-2 Emitted interference DIN EN 61000-6-4 Programmable parameters Operating modes Total resolution Scaling Rotation speed monitoring Diagnostic functions Position or parameter error Multiturn sensing Status indicator DUO-LED integrated in housing Approval UL approval / E63076 GBP5W - CANopen Technical data - mechanical design Housing ø58 mm Shaft ø10 mm (clamping flange) ø6 mm (synchro flange) Flange Clamping or synchro flange Protection DIN EN 60529 IP 54 without shaft seal IP 65 with shaft seal Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Starting torque ≤0.015 Nm IP 54 ≤0.03 Nm IP 65 Rotor moment of inertia 20 gcm² Admitted shaft load ≤20 N axial ≤40 N radial Materials Housing: steel Flange: aluminium Operating temperature -25...+85 °C -40...+85 °C (optional) Relative humidity 95 % non-condensing Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Weight approx. 500 g E-connection Connector Shaft with clamping or synchro flange Multiturn encoder 18 bit ST / 14 bit MT, CANopen

www.baumerivo.com www.baumerivo.com Absolute encoders - bus interfaces www.baumerivo.com 2 Subject to modification in technic and design. Errors and omissions excepted.31/10/2008 GBP5W - CANopen Part number GBP5W. 10 Interface

06 CANopen DSP 406 /

16 CANopen DSP 406 not

A3 Connector M23, 12-pin, radial D3 Connector D-SUB, 9-pin, radial M1 Connector M12, 5-pin, radial M2 2 x connector M12, 5-pin axial M3 2 x connector M12, 5-pin radial Voltage supply 10 10...30 VDC Flange / Shaft

0 Clamping flange / ø10 mm IP 54

A Clamping flange / ø10 mm IP 65

1 Synchro flange / ø6 mm IP 54

B Synchro flange / ø6 mm IP 65 Shaft with clamping or synchro flange Multiturn encoder 18 bit ST / 14 bit MT, CANopen Accessories Connectors and cables (page %S) Z 148.001 Female connector M23, 12-pin, less cable Z 148.003 Female connector M23, 12-pin, 2 m cable Z 148.005 Female connector M23, 12-pin, 5 m cable Z 148.007 Female connector M23, 12-pin, 10 m cable Z 180.003 Female connector M12, 5-pin, 2 m cable Z 180.005 Female connector M12, 5-pin, 5 m cable Z 180.007 Female connector M12, 5-pin, 10 m cable Z 181.005 Cable connector M12, 5-pin, 5 m cable Connection M2 / M3, continuative bus Mounting accessories (page %S) Z 119.006 Eccentric fixing, single Z 119.013 Adaptor plate for clamping flange for modification into synchro flange Z 119.015 Mounting adaptor for synchro flange Z 119.017 Mounting angle for clamping flange Z 119.035 Bearing flange for encoders with synchro flange

www.baumerivo.com Absolute encoders - bus interfaces M12-connector Connector Core colour Assignment Pin 1 brown GND B Pin 2 white UB Pin 3 blue CAN_GND Pin 4 black CAN_H Pin 5 grey CAN_L 4 3 3 4 Please use cores twisted in pairs (for example CAN_H / CAN_L) for extension cables of more than 10 m length. D-SUB connector Connector Assignment Pin 1 – Pin 2 CAN_L Pin 3 CAN_GND Pin 4 – Pin 5 – Pin 6 GND B Pin 7 CAN_H Pin 8 – Pin 9 UB M23-connector Connector Core colour Assignment Pin 1 brown/green UB Pin 2 white/green GND B Pin 3 pink CAN_L Pin 4 grey CAN_H Pin 5 white CAN_GND Pin 6-12 – – 8 9 1012 Please use cores twisted in pairs (for example CAN_H / CAN_L) for extension cables of more than 10 m length. Please use cores twisted in pairs (for example CAN_H / CAN_L) for extension cables of more than 10 m length. UB Encoder voltage supply GND B Encoder ground connection relating to UB CAN_L CAN bus signal (dominant Low) CAN_H CAN bus signal (dominant High) CAN_GND GND relating to CAN interface. Depending on model separated from GND B either by galvanic isolation or by inductive earthing. Terminal significance Terminal assignment GBP5W - CANopen Shaft with clamping or synchro flange Multiturn encoder 18 bit ST / 14 bit MT, CANopen Bus protocol CANopen Device profile CANopen - CiA DSP 406, V 3.0 (Device Class 2, CAN 2.0B) Operating modes Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) Preset Parameter for setting the encoder to a requested position value assigned to a defined shaft position of the system. The offset of encoder zero point and mecha- nical zero point is stored in the encoder. Rotating direction Parameter for defining the rotating direc- tion in which there have to be ascending or descending position values. Scaling Parameter defining the steps per turn as well as the total resolution. Diagnosis The encoder supports the following error warnings: - Position and parameter error - Lithium battery voltage control (Multiturn) Node Monitoring Heartbeat or Nodeguarding Default 50 kbit/s, Node ID 1 CANopen features

www.baumerivo.com www.baumerivo.com Absolute encoders - bus interfaces www.baumerivo.com 4 Subject to modification in technic and design. Errors and omissions excepted.31/10/2008 GBP5W clamping flange and M23 connector GBP5W clamping flange and M12 connector ø10h6 ø53 ø58 2010 48±0.1 M3x7 (3x120°) ø36 f8 ø53 ø58 2010 48±0.1 M3x7 (3x120°) ø10 h6 ø36 f8 GBP5W - CANopen Shaft with clamping or synchro flange Multiturn encoder 18 bit ST / 14 bit MT, CANopen GBP5W clamping flange and D-SUB GBP5W clamping flange, 2 x M12 connector, radial ø53 ø58 2010 48±0.1 M3x7 (3x120°) ø10 h6 ø36 f8 ø53 ø58 2010 48±0.1 340° M3x7 (3x120° ø10 h6 ø36 f8 GBP5W clamping flange, 2 x M12 connector, axial GBP5W connector dimensions ø10h6 ø36f8 ø53 ø58 201048±0.1 1615 M3x7 (3x120°) Dimensions GBP5W synchro flange M4x7 (3x120°) 42±0.1 3 9 104 ø52 5.5 ø6f8 ø50h7 ø58