GBCN TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
BI Technologies IRC Welwyn Completely free of Pb and its compounds RoHS compliant without exemption AEC-Q200 qualified Green Thick Film Chip Arrays GBCN Series Type Part Number Start Width (mm) Resistor Elements Circuit Package Size Scalloped Convex Square Convex GBCN164 GBCN164AB 1.6 0603 x 4 Isolated 1206 Summary of Types 07.21 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors All parts are Pb-free and comply with EU Directive 2011/65/EU amended by (EU) 2015/863 (RoHS3) Resistors Electrical Data GBCN164 Resistor power rating @70°C mW 63 Package power rating @70°C mW 250 Limiting element voltage V 50 Maximum overload voltage V 100 Resistance range ohms 1R0 – 1M0 Resistance tolerance % 1, 5 TCR ppm/°C <10Ω: ±400 ≥10Ω: ±200 Standard values E24 preferred, E96 available Ambient temperature range °C -55 to +155 Dielectric withstand V 300 Circuit R1 = R2 = R3 = R4 R1 R2 R3 R4
BI Technologies IRC Welwyn Physical Data Recommended Solder Pad Size GBCN Series 07.21 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors Green Thick Film Chip Arrays Dimensions (mm) & weight (mg) Type L W T A1 A2 B P G Wt. GBCN164 3.2 ±0.2 1.6 ±0.2 0.5 ±0.1 0.65 ±0.15 0.5 ±0.15 0.3 ±0.15 0.8 ±0.1 0.3 ±0.15 8.6 Dimensions (mm) Type A B B1 W C D GBCN164 1.0 ±0.1 0.55 ±0.1 0.4 ±0.1 2.6 ±0.1 0.4 ±0.1 2.8 ±0.1 Marking 5% tolerance parts are individually marked with three digits. The first two digits are the significant figures and the third defines the number of added zeros. 1% tolerance parts are individually marked with four digits. The first three digits are the significant figures and the fourth defines the number of added zeros. Construction Conductor Nickel Barrier Resistor: Ruthenium Oxide Alumina Substrate 100% Tin Protection
Dimensions (mm) Type A B C RD E F G W T BI Technologies IRC Welwyn 07.21 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors Performance Data Packaging GBCN resistor arrays are supplied taped and reeled as per IEC 286-3. Test Condition ΔR% (+0.1Ω) Load life 1000 hrs cyclic load @ 70°C 3 Short term overload 2.5 x rated voltage or maximum overload voltage for 5s 2 High temperature operation 1000 hrs @ 155°C 3 Biased humidity 1000hrs 85°C, 85%RH, 10% operating power 3 Temperature cycling 1000 cycles, -55 to +155°C 1 Resistance to solder heat 260°C for 10s 1 Mechanical shock 6ms half-sine, 100 g’s peak 1 Vibration 12 cycles, 20 min, 3 orientations, 5 g’s peak, 10 – 2000Hz 1 ESD Direct contact discharge to 8kV 1 Board flex 2mm deflection 1 Termination strength 1.8kg for 60s No damage Solderability ≥95% coverage Resistance to solvents Legible De-rating Curve GBCN Series Green Thick Film Chip Arrays
BI Technologies IRC Welwyn 07.21 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors Ordering Procedure Example: GBCN164AB472J7 (GBCN 1.6mm wide, 4 resistors, isolated circuit, square convex at 4.7 kilohms ±5%, packed on a 7” reel, Pb-free) General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn https://www.ttelectronics.com/resistors © TT Electronics plc Green Thick Film Chip Arrays GBCN Series Resistors Ordering Procedure Example: GBCN164AB472J7 (GBCN 1.6mm wide, 4 resistors, isolated circuit, square convex at 4.7 kilohms ±5%, packed on a 7” reel, Pb-free) G B C N 1 6 4 A B 4 7 2 J 7 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Series Width Number of Resistors Circuit Termination Value Tolerance Packaging GBCN 16=1.6mm 4 A=Isolated B=Square Convex 3 digits for 5% 4 digits for 1% F=±1% 7 7” reel 5000/reel, Paper tape J=±5% JP=Jumper (Blank for jumper) Barry – ignore dotted light lines – Word won’t let me delete them! GBCN Series Green Thick Film Chip Arrays